Question about Sharp AR-M550U Copier
Greetings to meet code F2-00 on Sharp copier What should I do. Need help.
Posted on Jun 26, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: SHARP AR-287 F2-00 error code
Although this appears to be an ATC (automatic toner control) problem and it may list as such in service manual which gives brief description of error code it is often something else.
There is a sponge roller at bottom of toner that wears down considerably and when the hopper is very low or out of toner the otner light will come on(triangle of dots). The customer puts the new toner in and the sudden surge of a large amount of toner cascading into the hopper causes an excessive amount of toner to go past the sponge roller and directly into the developer unit which is directly under toner hopper.
The ATC sensor is on the bottom of developing unit and "reads" the density of the developer /toner ratio and with a very overtoned situation as the one created above you would get an F2-00 code.
What is normally done is to either dump toner out of hopper and replace sponge roller and seals or replace toner hoppers as a whole which is quicker and costs almost rh same as cahnging the sponge roller and seals is more labor intensive.
Also the developer is now contaminated with an excessive amount of toner and the recommende solutin is to replace the developer and calibrate theu service program.
This is hardley recommended by a service man unfamiliar with this mode let alone the customer. I ahve been in the Bay Ridge area for years and as a matter of fact bought an investment property thru Petses Realty. Frank
Posted on Sep 03, 2009
Tips for a great answer:
Mar 03, 2011 | LG Dare VX9700 Cell Phone
Jan 07, 2011 | Cell Phones
Oct 09, 2010 | Nokia 1100
PUK code is called as PERSONNAL UNBLOCKING KEY.
Your phone will ask for PUK code when you entered the PIN
code wrongly several times depending upon the mobile make. The mobile asks for
PUK code so that unauthorized persons do not use your mobile for wrong cause.
To get PUK code please contact your service provider
through phone or go directly to their office. They will provide you the PUK
code for your mobile. The PUK code is unique for each mobile phone model.so
that you can open your phone. When you planning to call your service provider
you cannot use your mobile as it is fully locked. Please use some other mobile
with same network to call your service provider.
code prevents thieves from being able to
make use of stolen handsets, that is why it can only be given by the service
While you get the PUK code ,the service provider
customer care officer will ask for your personal details to check whether the
mobile belongs to you only. If they are satisfied with your answers they will
provide with the PUK code
DONOT enter the PUK code several times wrongly,It will
block your sim card permanently.
This PUK code is FREE. You no need to pay any money to
get the PUK code
Oct 06, 2010 | Sony Ericsson w580i Cellular Phone
Aug 15, 2010 | 2003 BMW 325
Jul 29, 2010 | Motorola Mobility RAZR V3m Cellular Phone
381 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: