Question about Samsung ML 1610 Laser Printer
How to solve the pr
Posted on Aug 08, 2011
Have you tried unplugging the printer, and cleaning the rollers with a damp wash cloth? this may let you get a little more use out of the rollers. Otherwise look into getting a replacement roller assembly, they are hard to find but they should still be available. (http://lmgtfy.com/?q=ml-610+pickup+rollers)
NOTE: Verify that you have thoroughly dried the pickup rollers before testing the printer again.
Posted on May 23, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 30, 2012 | HP Office Equipment & Supplies
Oct 11, 2011 | HP LaserJet P3005 Printer
Sep 05, 2011 | HP LaserJet 3055 All-In-One Printer
Jul 28, 2011 | Samsung (ML2250S3XAA) Paper Cassette for...
Hope this helps helps. Please keep us updated and remember to rate this answer.
Feb 07, 2011 | HP LaserJet P3005n Printer
Jams in tray 2
Table 7-10 Causes of tray 2 jams
The feed or separation rollers are dirty, worn, or damaged. Clean the rollers. If they are dirty after cleaning, or if they are
worn or damaged, replace the rollers.
The pickup roller is worn or damaged. Replace the pickup roller.
The tray 2 paper pickup assembly drive gears are damaged
or the assembly is defective.
Check the drive gears in the paper pickup drive assembly.
Replace the pickup drive assembly if the gears are
damaged. See Paper-pickup drive assembly.
The tray 2 pickup solenoid (SL101) is damaged. 1 Disconnect the connector for the tray pickup solenoid
from the dc controller PCA (location J92).
2 Measure the resistance between the cable connectors.
3 If the measured resistance is not approximately
160 ohms for the HP LaserJet 4200/4300, or 110 ohms
for the HP LaserJet 4250/4350, replace the tray 2
The tray 2 lifter-drive assembly or the stack position
sensor (PS107) is defective.
Replace the lifter-drive assembly. See Tray 2 lifter-drive
assembly and/or Printer switches and sensors.
The dc controller PCA is defective. Replace the dc controller PCA. See Dc controller PCA.
Dirty, worn, or deformed pick-up roller, cassette separation
roller, and cassette feed roller.
Clean the rollers if they are dirty. Replace any worn or
deformed rollers. The cassette separation roller and the
cassette feed rollare are to be replaced together.
Damaged gears in the cassette pick-up drive unit. Move the gears in the cassette pick up drive unit. If the
gears are not rotating correctly, or are damaged or worn,
replace the cassette pick-up drive unit.
Dec 25, 2010 | HP LaserJet 4250 Printer
Apr 18, 2009 | Dell 1700 Laser Printer
Nov 28, 2008 | HP Office Equipment & Supplies
Dec 05, 2007 | HP LaserJet 1320 Printer
Oct 20, 2007 | HP OfficeJet 7110 All-In-One Thermal...
680 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: