Question about OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

I've been using OKIDATE MICROLINE 320 PRINTER at work. I was printing something and I realized that I was printing the wrong page so to stop printing, I simply turned off the power and waited. Considering that it worked previous times I thoght it would work. But it didn't. It kept on printing the page where I had left off. I've tried to turn off the power, and unplug the cable that was attached behind the back right handside. Then I waited for a long time and tried it again, it kept on printing the page where I left off. Is there any way that I can reset the printer? or stop from printing the page where I left off?? It's going to print 300 pages of things that I don't need so I don't want to waste paper nor ink. Please help!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

You would have to cancel the current print job from your computer for it to stop. Assuming you have access to a computer that is connected to that printer, you will have to find that printer by going to Control Panel > Printers and Faxes > Oki ML 320 then right click, select "See What's Printing" and cancel Current print job (I am also assuming you are using windows). I really hope this helps, if not add a comment clarifying your question, thanks.

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get oki microline 391 turbo to work with windows 2003 server?


use the HP laserjet 4 or 4000 print driver. this is the most basic print driver and has played nicely with the older printers

Jun 02, 2014 | OKI MICROLINE Office Equipment & Supplies

1 Answer

We have a microline 320 turbo. we installed a new dell computer and now cant get the printer to print corectly on contineas feed labels. The print head starts on the right side and prints off the sheet...


Try downloading and installing an updated driver for your printer.

Here is the driver download page for your printer: MICROLINE 320 TURBO < Drivers & software

Select your operative system, download the file, then run the installer.

Mar 03, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Okidata 320 turbo microline prints jibberish


sounds like a job was sent to the printer with the wrong driver. There is no way to purge it just load some paper and let it run until it stops. They make sure your emulation matches the driver youa are using. Example Epson 9pin compatiable or OKI ML320 Turbo-IBM drive you want the emulation set to Epson FX. Or if using the OKI ML320 Drive you want the emulation set to ML.

Jan 15, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Rolling halfway down the page


is the form tear off on?
if it is try changing it to off

Dec 03, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki microline 320 turbo


Your Oki model does not need drivers, for they are already contained since Windows 98 and up. However, if it still doesn't work, check that the printer emulation is set to IBM and then install a new printer using the IBM Proprinter II/III driver, also contained in Windows.

Be blessed.

Oct 02, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

OKI DATA MICROLINE 320 TURBO PRINTER PROBLEM


Hi Charles,
Use the IBM proprinter driver for this printer and select IBM in the menu of the printer.
Hope this helps.
Dezzi

Sep 10, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Page comes up blank !!!


check your rribbon.
also cjeck your head.
try to tast page from printer properties.
also try to print from dos .
check your printer datga cable.change it

Mar 25, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

2 Answers

OKI Microline 320 Problem...


I think you maybe using the wrong driver.Printout the menu if you are set for IBM than choose the "IBM Proprinter" driver in windows.Hope this helps.
Dezzi

Feb 26, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Okidata microline 320 turbo 9 pin printer


What driver are you using, you should try the IBM Proprinter Driver.Hope this helps.
Dezzi

Feb 11, 2008 | OKI MICROLINE 320 Matrix Printer

Not finding what you are looking for?
OKI MICROLINE 320 Turbo Matrix Printer Logo

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...