How do I pair the Jabra Cruiser 2 with my new cell phone? I have gone into settings and set my phone to pair, but it keeps saying "Device Not Found." What do I need to do on the Jabra?

• Touch Apps
• 2.Scroll to and touch Settings
• 3.Ensure Bluetooth is turned on
• 4.Touch Bluetooth
• 5.Slide the Power switch to turn the JABRA CRUISER on
• 6.Press and hold the Multifunction button until you have a rapid flashing blue LED
• 7.Touch the JABRA CRUISER in the list of devices
• 8.The JABRA CRUISER is now paired
• 9.The JABRA CRUISER and Galaxy S4 are now ready to be used
• 10.Press the FM button in order to start streaming audio via the FM transmitter. The FM LED will turn red

most pairing when asked by the device requires a 00000 passcode
but you need to set the jabra and the iphone up for pairing
here is a link for jabra the iphone should see it when the jabra is set to set up mode..
http://www.jabra.com/support/Jabra-JOURNEY_100-47300000-15

the Jabra Cruiser is most likely not compatible with your iphone 5. Apple makes their products to connect only with their products most of the time. ive tried connecting my tracfone\'s bluetooth to my ipod touches bluetooth and cant pair them. Xbox 360 pulls the same issue too. so you probably will have to purchase a different car cruiser

Have you tried pairing it with another device? Maybe a computer or another cellphone?

you may contact the service provider......

Hi there, You need to pair the two devices. Make sure the cruiser is off, then push and hold the power button the Jabra for 8-10 seconds until it is in pairing mode. You need to continue holding the button after the device has powered on until you get there. Once there, on BlackBerry go to Bluetooth settings and select search for a device. Select the Jabra Cruiser and put in the passkey - 0000. You have now paired the two devices! Alex

when you turn blu tooth on on the iphone under settings. make sure its discoverable and then scan while holding down the jabra cruiser in car speaker phone pairing option

No the Jabra Cruiser 2 bluetooth only allows one connection at a time.

1) Ensure that your Jabra headset is turned completely off. Press the tap button on the headset until it ceases flashing and the light goes off.

2) Hold down the tap button to power your Jabra headset back on. Keep holding the power button until the lit power indicator cycles past flashing mode and becomes solid.

3) Release the power button.

4) Navigate through your cell phone "Settings" menu and ensure your "Bluetooth" or "Hands-free" section is set to the "On" or "Active" mode.

5) Choose "Search for new devices" or "Find new devices" on your phone's Bluetooth or hands-free menu.

6) Place the Jabra headset close to your phone to ensure it can be discovered by your cell phone.

7) Select a "Connect" or "Pair" option once the Jabra headset name displays on your cell phone.

8) Enter the default passcode by entering "0000" on your cell phone keypad.

9) Ensure that the Jabra headset has been paired. Look for the Bluetooth icon in the upper portion of your cell phone screen. Make a call to verify that audio is being routed through the Jabra headset.

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.