Does not keep correct time. - Garden

If your Hamilton Beach slow cooker model 33966C is no longer switching to the "keep warm" setting after the cook time is up, there could be a few possible causes:

1. The thermostat may be malfunctioning. The thermostat controls the temperature of the slow cooker and if it's not working correctly, it could prevent the slow cooker from switching to the "keep warm" setting.
2. The timer may be malfunctioning. The timer controls the cook time and if it's not working correctly, it could prevent the slow cooker from switching to the "keep warm" setting after the cook time is up.
3. The heating element may be malfunctioning. If the heating element is not working properly, the slow cooker may not be able to maintain the correct temperature to switch to the "keep warm" setting.
4. The lid may not be properly sealed. If the lid is not properly sealed, heat may be escaping and the slow cooker may not be able to maintain the correct temperature to switch to the "keep warm" setting.

It is recommended to try to unplug the slow cooker for a few minutes and then plug it back in to see if that solves the problem. If the problem persists, it may be best to contact Hamilton Beach customer service for further assistance or to have the slow cooker repaired or replaced.

If you have set the time correctly and it still won't keep the correct time then the clock must be faulty. How old's the tablet? Is it still under warranty? If not decide how critical it is to you to have the time. What's wrong with a watch or the clock on your 'phone?

Perhaps you did setup the wrong time zone. (wrong country) Check the settings.

Try replacing the motherboard's battery, it might be dead.

Don't even try adjust or alter the unit. Call the dealer or take it back to him or you will invalidate your warranty and that is not worth it. Let the dealer worry about it.

Hello,
Your computer system has a RTC (Real Time Clock) Battery that usually stores the correct time and other settings of the motherboard when you power down. If this battery is dead or faulty, it will reset Get it replaced and set your time once and it should remain correct as long as the battery is good.

Thanks,
Lolita

Need to know the model of the phone system

It means you need to set the correct date and time in the setup menu. It will keep taking pictures, but it's telling you that you have not set up the correct time & date in the camera.

Take the batteries out from the base, where the chime mechanism is. Wait till it gets close (20 seconds till) to a specific hour time, like 8:00 or 9:00, replace the batteries for the chime mechanism. And then count the chimes at the hour. If they are correct, you are set. If they are incorrect, turn the time back 15 minutes before the hour and bring it right back and monitor the chimes again. Hopefully this should fix it. Please post the results.

must sett up in ez.. use grenish mean time for your location  not daylight saving  sorry about the spelling