Question about Microwave Ovens

1 Answer

The knobs on my Euro-pro TO240L have split. Where can I get replacement knobs? When I try Euro-pro.com it sends me to Shark.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

To fix split knobs...

Stuff needed:

Good thin super glue.
a few inches of solid wire (around 18 gauge). 3 or so garbage bag ties together to make them stronger may work.
Pliers
heavy quilting thread (if you can break it by hand its too weak)

Wrap the wire 1 turn around the knob stem at the edge and twist the ends together. Snug it just enough to hold it in place. Have the pliers ready and apply some glue into the cracks. Using the pliers, twist the wire ends until the cracks close.

Starting at the back of the stem wrap the thread tightly around the stem up to the wire and back. Remove the wire and finish wrapping the thread back to the edge. Apply glue to the thread so it soaks in and allow to dry a bit.

Cut the end of the thread at the shaft, add more glue if needed and allow it to set for a few hours. Sand the thread lightly with an emery board or nail file if needed.

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just changed added water to my steem mop and now it wont make steam


Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101


Apr 16, 2011 | Microwave Ovens

1 Answer

WE need a replacement part to241p euro-pro for our toaster oven Timer numbers are as follows E210866 R 50024942 05002012828


I need the same part, Bravetti won't sell me the timer as they say it is a non-consumable part but they will fix it if you send it to them. FAIL!!

Mar 05, 2011 | Microwave Ovens

1 Answer

Euro-Pro Rotisserie Toester Oven. We need an operators manual for this unit.


The only manual I could find was for the Bravetti Convection and Rotisserie Toaster Oven by Euro-Pro. Here is the site: http://www.sharkclean.com/manual/K4245H_REV_0405.pdf
I hope this helps

Jan 28, 2011 | Microwave Ovens

1 Answer

Shark vacum instructions


Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the
Shark Manuals that you need.

heatman101


Dec 20, 2010 | Microwave Ovens

1 Answer

I m looking for a Function knob for a Euro-Pro model#10156


sometimes you might able to find these items cheaper on Ebay.com just type in your MOD #

Dec 20, 2010 | Microwave Ovens

1 Answer

Steam mop not heating


Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the
Shark Manuals that you need.

heatman101

Dec 09, 2010 | Microwave Ovens

1 Answer

Shark Euro Pro Steam cleaner, I need the instructions for use


Hi

This is where you can get manuals ofr the whole range
Euro Pro manuals

hope that helps

Tom
EuroPro steam cleaner

Sep 16, 2010 | Microwave Ovens

1 Answer

Bravetti Toaster Oven -- Purchased, December 2008. Timer is not working. Can I buy a new one? I also need the knob as in the process of determining why it would not heat, the know was broken in order...


Hi,
The only way to get OEM parts for that is to
Contact Euro-Pro by phone at (800) 798-7398. I called them and they do not sell internal parts for their products, but they will fix it for you for $27.00 plus $16.95 shipping, maybe the shipping to you would be less. You must pay for the shipping to them as well.
Other then that you will have to replace it..

Sep 15, 2010 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...