Question about Kenmore 3.8 cu. ft. HE3t Front Load Washer

1 Answer

I am getting message "

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 731 Answers

Remove and clean the link screen
Most likely palces for scrrens are top right of the dryer or inside the door frame on the bottom.
This should be cleaned with EVERY load

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

May tag electric dryer 5000 series not drying


Check dryer vent hose for lent blockage. If vent is blocked and is not blowing out the element will not get hot.

Sep 08, 2014 | Dryers

1 Answer

Blowing cold air


This model dryer has two heating elements, one for the top and one for the bottom, I suspect that the bottom element is burned out. If you want to attempt it yourself then I can send you a service manual that will walk you step by step through the whole dryer.

Dec 11, 2013 | Maytag Neptune MCE8000AY Electric Dryer

2 Answers

My maytag neptune dryer doesn't blow any hot air


on top of the heating element on the left side there is a white 2connector part, that is the heater thermal fuse. disconnect the dryer power cord and one wire of the thermal fuse and use a meter to find out if you have continuity to it. if not replace it. also check for burn wires at heating element. also test heating element by disconnecting one wire and using an ohm meter test it at 2 therminals. it shoul measure 10-12 ohms.

Feb 14, 2011 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

My LGB6300PW1 Whirlpool dryer will not blow hot air anymore. Have cleaned and changed vent duct, lent filters are clean. I am pretty handy, but dont have the manual. Is there a link you can send me to...


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101
,.

Oct 28, 2010 | Dryers

1 Answer

My maytag 3000 series dryer is not even a year old untill 2 more days, it does not dry my clothes no matter what setting I have it on the lent trap gets cleaned about 2 or 3 times during each cycle,yet it...


oooow,,,temper temper,,,,take a deep breath,,,
i think the temp censor has stoped working thats why its not getting very hot its that or the heating coil/s are broken,,also check the air vents at the back are not blocked up if so its not getting any air to it,,,
then go out and find a big stick,,,and batter it with the stick,,,
this realy wont help fix it,,but it will make you feel soooo much better?

Jul 12, 2010 | Maytag Dryers

1 Answer

KENMORE 80 SERIES NOT HEATING


you need to check the heating element and the thermal fuse in the back of the dryer, they should be their. do you have an ohme meter, if not barrow one or you can pick one up cheep and lowes or homedepo .

Dec 13, 2008 | Kenmore 659 Electric Dryer

2 Answers

Power going to switch but no action in the drum


check the belt, it may have a broke belt switch.

Nov 24, 2008 | Kenmore 63942 Dryer

Not finding what you are looking for?
Washing Machines Logo

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5471 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...