Question about Speakers & Subwoofers

2 Answers

SOUND CARD CREATIVE ES 1373

NEED DRIVER ess allergo sound driver for free download

Posted by on

  • Anonymous Mar 29, 2009

    download

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Go to nec.com, next to their support and download section. you are looking for the audio driver for the Powermate VT300i series,

Here are the links for the downloads.

Win 98 is ftp://ftp.necam.com/pub/Catalog/3337/vt_ess_9x.exe

Win NT is ftp://ftp.necam.com/pub/Catalog/3338/vt_ess_nt.exe

Being such an old card, it isn't supported by XP or even Windows 2000, and for sure not Vista, so the above is all that is out there...

john



Posted on Aug 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Kane_thumper just asked: KEF KHT6000ACE TWEETER DIED. HOW CAN I GET A NEW... - Solve

Posted on Jun 13, 2009

  • off_zen Jun 13, 2009

    Generic problem for all Home Theater Speakers and Sub...
    SOUND CARD CREATIVE ES 1373

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When sound gets too loud speaker cuts out.


You should update your sound driver. Update of Sound Card Driver.
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Click on Sound, Video and game controller
  • Right click on sound driver from the list.
  • Click on Update Driver.
  • Update Driver Wizard start.
  • if the problem is still exist.
  • Replace the sound card or have a local tech take a look at the sound card.
  • Sound Card Drivers

Mar 21, 2010 | Logitech Z4 Speakers

1 Answer

Connect creative 4.1 speakers with laptop at time 2 speaker work


i assume ur mother board supports surround sound an ur using windows os. go to control panel - sounds and audio devices - speaker settings-advanced - speaker set up with the drop down menu. select surround sound - apply - ok.
if ur using surround audio drivers like realtek, etc. the settings console should have somewhat similar options like audio input/output (I/O) options. select surround sound speaker setting and configure which audio port should be audio output ports. driver settings can be accessed from control panel too. to access control panel click on start menu there u'll see the control panel menu.

Mar 13, 2010 | Creative Labs Speakers & Subwoofers

1 Answer

Need to download new sound driver for computer speakers


Philips.Drivers-Updated.net

Driver-Pro.com/Audio

Audio.WindowDriver.com

Philips.Drivers-Fix.net


Sep 28, 2009 | Philips 2.1 Multimedia Speaker System -...

1 Answer

IN MY SYSTEM UNFORTUNATELY UNINSTALLED THE DRIVER SOFTWARE BUT I HAVE THE CD ROM. AFTER I PUT THE CD ROM AND EXECUTE, DURING THE PROCESS AFTER REACH THE INSTALLATION AT 34% BUT AUTOMATICALLY DISABLE THE...


You can try this:
I am assuming you have a PC based sound system.

1. Remove your Creative Labs Home Theater from your PC. You should remove all hardware.
2. If you have Windows, go to "Control Panel"
3. Select "Add or Remove Programs"
4. Delete all Software releted to your Creative Labs System
5. Go to http://www.creative.com/language.asp?sDestUrl=/support/downloads
6. Download the appropriate driver for your system
7. Reinstall the system with the new driver

You could try your CD ROM after completely deleting the software from your PC, but I think I'd just try the downloaded version. The important thing is to completely remove all hardware and software before reinstalling.

Apr 08, 2009 | Creative Labs Speakers & Subwoofers

1 Answer

Sound blaster live 5.1 sound driver code sb0100


Hi curt here I have a hppaviliona636n desk top runing vista and I have the on board sound disabled. as it dose not seam o work and i do not have the orignal disk wth the drivers on it . how everI put my sound blaster live 5.1 sb0100 pci card in and down loaded the drivers for this card and installed them tem form a file on the desk top how ever this also did not make this card fireand I wonder if maybe I am missing a jumper of the sound blaster board and cant seam to find ajunper lay out for tiswhat cn I do to check for jumpers on both the sound blasterboard and the hp mother board .? and also do the drivers have to be saved on a cd or a 1.44 flopie disk befor they will load or will the sound drivers load from the desk top location?? my email address if you need it is nasacolumbia@aol.com thank you Curt. tucson

Apr 06, 2009 | Creative Labs Speakers & Subwoofers

1 Answer

Sound problem


Hi,

I have a creative SoundBlaster LIVE! 24 Bit External Sound Card and this annoyed me for weeks.

depending on your surround sound reciever depends on the solution.

i have an Acoustic Solutions surround sound system with coxial and optical inputs, aswell as stereo red & white jack inputs.

not knowing the method or connection your using makes it difficult to give you a single solution so i'll list a few.

The soundblaster software shoudl include the Creative Audio console with all sorts of effects, one is CMSS (CMSS-3D) Stereo widening which is still stereo but gives a surround sound effect.. but i'm guessing you payed for 5.1 and you want 5.1 onto the next part

5.1 surround sound can only be produced when the actuall audio your playing contains 5 channels of audio, for example you cant play a stereo song in 5.1 surround sound without some sort of hardware or software sound manipulation. Luckily my surround sound system has Pro Logic II built in and some other effects which convert a 2.1 signal to a 5.1 signal and it works brilliantly. I'm not sure of a software alternative.

setup for your soundcard will be different under XP and Vista also, but there should be a properties option for your sound device where you can select your speaker setup such as headphones, built in speakers, 2.1 speakers, 5.1 speakers, 7.1 speakers and you should be able to manage this from the creative software.

If using Coxial / Optical or SPDIF under vista you MUST set the playback device as SPDIF, at least you have to with my sound card and drivers and seems to be a limitation of the actual sound card drivers for vista.

Personally i was looking forward to hearing the windows login melody in 5.1 surround sound too, but this doesnt happen.

Infact i find that almost all programs bar a few will not play Dolby Digital or DTS 5.1 surround sound via any or my output options hence the next solution..

if you have the 5.1 sound but winamp simply just plays it in stereo try the following.

You need to use DirectSound Output:

Preferences (Ctrl-P) > Plug-ins > Output > Select "DirectSound Output"

That should work in most cases, but if not, then:

Checkmark: "Allow hardware acceleration" in DirectSound Output config,
and make sure your sound card/chip is selected as Output Device.

Note that any changes will take effect only after playback is restarted.
In some cases, a Winamp restart is required.

If that doesn't work make sure you have the latest version of DirectX
(v8.x or higher is required)

Winamp 5.25/5.3 and higher:
For actual multi-channel files (ie. aac/wav/ac3/ogg/wma files encoded in 5.1ch surround, as opposed to standard 2-channel stereo mp3's), you need to checkmark "Allow surround sound" in 'Winamp > Prefs > Playback' for the music to play in its original 5.1 channel format (Note that this setting is checkmarked by default).

Windows Vista:
In addition to the above instructions, Vista users will also need to go to:
Control Panel > Sound > Playback tab > Speakers > Configure:
Select: 5.1/7.1 Surround.
Then:
Control Panel > Sound > Playback tab > Speakers > Properties > Enhancements tab
and checkmark "Speaker Fill"

Hope this helps

Anthony Kinson

Apr 22, 2008 | Speakers & Subwoofers

2 Answers

DRIVER FOR SBS 2.1 370 SERIES


There are no driver for Creative SBS 2.1 370. It is just that you reinstall your sound card software as it is not being detected.

Apr 07, 2008 | Speakers & Subwoofers

1 Answer

Sound problem


What you need to do is install new sound drivers1.gif, now depending on how your system is set up there are a couple possible solutions. Now I will walk you through a couple steps but before I begin I want you to remember something for me and I will explaine in further detail later. BEFORE INSTALLING NEW AUDIO DRIVERS YOU MUST FIRST UN-INSTALL ANY DRIVERS THAT ARE CURRENTLY INSTALLED. That is very important as if this step is skipped the problem will still exist.
1st solution go into your control panal, find the icon for your sound options, double click on that icon. Go into the properties and uninstall all audio drivers. Then make sure your P.C. is connected to the internet and restart your computer. When the P.C. restarts it will look for driver for your audio device, it will also look online to try to find drivers. This should fix your problem, just follow the instructions and install your new driver. However for the sake of giving you a wider set of tools I will list a couple other options.
2nd solution check Windows update, let them scan your system and see if they have an updated audio driver. If they do then un-install any current audio drivers and run the update.
3rd solution if you have an onboard sound card1.gif (it is sodderd to the motherboard and canot be removed) You may have to go to the website of the manafactuer of your motherboard and enter the model number of your motherboard, they should have instructions for updating the audio drivers for your sound card. You may have to find the support section of their website .
4th solution If you have a PCI video card1.gif (it slides into a PCI slot on your motherboard and can be removed from the computer) You will have to find the manufacture of the sound card, sometimes the easiest way to get this info is to open the side of your computer (remember to power off and unplug your computer before removing the side) and looking at the card its self as most manfacutuers will have their name on the card, take note you may also need a model number off of the card for some of the manufactuers. Find the website for your videocard and try to find drivers for your particular card, keep in mind again these companies make many diffrent models so there may be diffrent drivers for diffrent sound cards1.gif and even drivers based on the operating system you are using. Once you find the driver you need make sure you have un-installed any drivers that were on your computer and download and install your new drivers.
Hope this helps

Jan 25, 2008 | GE HO98005 Computer Speakers

1 Answer

Sound problem


can you go to a site and find your machine and download the drivers for it? I have a creative audigy sound card which for the longest time wouldn't work either. I got an error when I tried to initiate it saying a a3dll file was missing. so I found the file - uploaded it, and now the audio card is working. maybe you have a similar software problem.

Sep 13, 2007 | Level 9 Sound Designs Monsoon Planar Media...

2 Answers

Speakers work...just not when plugged into desktop


Hi, what you probably need to look for is driver for your sound card which is built-in into your motherboard. Try to get the model no. of your mb and proceed to their website to download appropriate drivers. Drivers are OS specific. If your sound card in a plug-in PCI card, then you would have to check the chipset number or the sound card model no. to get the right driver. Hope this helps.

Jan 08, 2007 | GE ULTRASONIC PRO 2.0 Computer Speakers

Not finding what you are looking for?
Speakers & Subwoofers Logo

Related Topics:

1,413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Speakers & Subwoofers Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Michael Edwards
Michael Edwards

Level 1 Expert

53 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...