Question about Cell Phones

Open Question

I have gigaset a49h all the time there is a message shown Register HS and i cannot make any calls or get any calls from any one. so what can I do ? please help

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: call register

Well the call register is probably full .... so go and delete all the call lists ; recieved, missed and dialed lists .... this should solve ur problem !

Posted on Nov 06, 2008

  • 121 Answers

SOURCE: no notification of missed calls and messages

backup ur contact & Phone memory then enter *#7370# phone want the security code then enter 12345 ( if u no Change it ) phone will restart. then open log/setting/and set 10days. it will be ok

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My cordless phone Gigaset A49H is working well. I need to replace battery. Can I use AAA Ni-MH 900mAh 2V battery

if the volts of the old batery is the same with the new u can use matters if the old battery was from lithion only or nikelioum / kadmium . u can use nikelium/magnisium batery too all rechargable are (sry for bad english)

Sep 28, 2015 | Siemens Gigaset A49h Cordless Phone...

1 Answer

How to reject calls in gigaset A490

As soon as you lift it from the base station, it has already accepted the call. So before lifting it, press the button with the red phone.

Jan 28, 2014 | Gigaset Siemens A49H DECT Digital Cordless...

1 Answer

Gigaset a49h

The matrix board is needing replaced,or the converter needs calibrated

Nov 11, 2013 | Lands Phones

1 Answer

Gigaset coardless phone {A490} THE PHONE DISPLAYED REGISTER HS , CAN'T CALL

Your handset doesn't yet 'belong" to a base so look in the manual and see how you do it. Each brand is different. You will need to enter a code which is typically 0000 or 1234

Sep 29, 2013 | Siemens GIGASETA49H GIGASET-A49H GIGASET...

2 Answers

Incoming voice is very low.battery is in fully charged condition.Volume is also set at max. WE are putting the call under speaker phone and continuing the call.

If you have ADSL line also connected to the same phone then it is because of that...
To solve the problem simply buy one vioce filter and install it in your phone line it should cost you around 2$.

Aug 09, 2013 | Siemens GIGASET-A49H GIGASET-A49H

2 Answers

Batteries don't hold charge

you will need a new battery, however, check your options, it is probably cheaper to purchase a new phone than a new battery for your old phone

Jul 03, 2013 | Siemens GIGASET-A49H GIGASET-A49H

1 Answer

Gigaet A495 register HS

You may download a copy of the manual here. The registration instructions are on page 13.

Nov 17, 2012 | Siemens Gigaset A495 Cordless Phone

2 Answers

Gigaset a495 showing Register HS, and i cant making call.. plz give me a solution

gigaser A495 Handset ,
Actualy one problem may Handset Disply not work,Pls reply how to work in incoming and disply screen number.

Aug 18, 2012 | Siemens Gigaset A495 Cordless Phone

1 Answer

My Siemens gigaset A 490 cordless phone is showing Register HS what i have to do pl advise

To register the Gigaset handset, you need to have the handset near the base. Press and hold the Register/Paging button on the base for 3+ seconds (it's hidden by the handset when on the base). A shorter press of the button will activate the Paging feature. Then within 60 seconds of pressing the Register button on the base, press Menu and select Settings. Press OK and go to Handset. Press OK and then select Register HS. Enter the base PIN (default is 0000) and then press OK. (Use the up/down arrows to navigate the menus.) You will see Registering flash on the display of the handset for approximately 1 minute while the registration is processed.

The manual for the Gigaset A490 is available here: . If you need it in another language (or country), start here: .

I hope this helps.

Cindy Wells

May 26, 2011 | Siemens Gigaset A490 Twin Cordless Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers


Level 3 Expert

78289 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides