Question about Microsoft Windows 7 Home Premium 64BIT Operating System Software OEM DVD

2 Answers

I need to restore my computer to factory settings

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 123 Answers

Hi,

Good day, for you to be able to restore your computer to factory settings you can to a system restore which is always present in every windows. Just follow these steps:

1. >Open the Start Menu.
>Click on All Programs
> Accessories,
>System Tools
> System Restore
or you can

2. >Open the Start Menu
>Right click on the Computer button
> click on Properties
>Click on the System Protection link

3. If you have done a system restore before just Select (dot) Choose a different restore point,
and click on the Next buton

4. Select (click on) a listed restore point that you want to restore Windows 7 back to.

5. Click on the Next button then Click on the Finish button

6. Click on Yes to confirm ( it will give you a warning so you need to click yes to contnue )

7. After the computer has restarted, click on the Close button You'll get a message saying that your computer is been restored successfully

Note: if you don't have a restore point you can solve this by having your windows 7 reinstalled on your pc to get the default settings back ( this is the best way by could be time consuming )

Hope this help you in resolving you problem. Have a great day.

Posted on May 22, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Ok, first, you are asking a very interesting question since you have Win7 HP 64bit, but you do not know how to reset to factory settings? First, why do you have a 64bit version of Win7? Most people pay a processing penalty for this, so I do not understand, unless you run Fourier Analysis on your screensaver :P
My next issue is I am not sure what you mean by factory settings? Normally this means performing a full new install without data backup, etc... If I recall my Windows manual correctly, aside from backup/restore, which it does not sound like you have that setup, there is no other magic button to push to get to factory settings, unless of course you have a recovery disk and know your way around that. Sounds like a full install is warranted, you probably should make sure any data you have is backed up somewhere before doing that though, or you will lose it.

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to restart my computer to a factory settings


1st of all you need to take back up of all your important files and data.
Then Turn off your computer.
Remove everything but the monitor, keyboard and mouse.
Turn on the computer and when see the first screen, press F8 to open the Boot Options Menu.
In the menu you need to find System Recovery Options
Due to every PC different configuration, you need to select Factory Tools and then restore factory setting.
Presses the Yes button and restore system software to factory condition check box and click Next.
After the restore operation is complete, click Finish to restart the computer.

Hope this will work for you ! :)

Mar 24, 2017 | Computers & Internet

2 Answers

I don't know my password to Ipad need to hard reset


Can only be done via a computer that has iTunes on it. Log in with Apple ID, back up the device and then Reset.

If you know the password it can be reset via Settings.

Mar 23, 2017 | Tablets & eReaders

1 Answer

How do I do a factory recovery on my mini ipad


iTunes enables you to restore iPad mini to factory settings. Before you start restoring iPad to factory settings, please note that you need to install the latest version of iTunes on your Windows computer or MAC. Then go to Settings > iCloud to turn off Find My iPhone. Now, you can factory reset your iPad with iTunes as follows.

1. Plug iPad into the computer with the USB cable. The iTunes on your computer will automatically launch. If not, double-click the icon to start it.
2. Click the name of your iPad at the upper right corner of iTunes, and then the information of your iPad will be shown. Click the "Restore iPhone" button in the window to start.
3. iTunes will ask whether you want to back up iPad before restoring. You'd better choose "Yes" for the reset will erase the contents in your iPad. Then iTunes will start restoring your tablet to factory settings.
4. Click Restore again to confirm. Then iTunes erases your iPad and installs the latest iOS software. After you restore your device to factory settings, it will restart. Now you can set it up as new.

http://www.leawo.org/tutorial/how-to-restore-iphone-6-plus-to-factory-settings.html

Nov 06, 2016 | Apple iPad Mini

3 Answers

How to take laptop back to factory settings


Depending on the brand and year it was made there may be a factory partition that will restore computer back to factory defaults, if not then a reinstallation of windows will be necessary, If factory partition is available just do a search o Google with your make and model # such as : How to restore an Acer Aspire 7425 to factory defaults using recovery partition

Mar 15, 2014 | IBM ThinkPad T40 2373 Notebook

1 Answer

RESET TO FACTORY SETTINGS


What type of Laptop ? and operating system on it ?

Restoring your laptop to factory settings can take up to an hour to perform, depending upon the type of laptop and operating system on your machine. Prior to performing a system recovery, you should remove any external peripherals, such as ExpressCards, PC Cards, and USB-connected printers and hard drives. Turn on the laptop. Press the "F8" key until the "Advanced Boot Options" screen appears. Select "Repair Your Computer" using the arrow keys. Press the "Enter" key. Choose your "Language," then "Next." Login with an administrator-level username and password. Click "OK. Select "Dell Factory Image Restore," then "Next." Tick the check box next to "Yes, reformat hard drive and restore system software to factory condition." Click "Next." Click on "Finish" after the computer has concluded the factory restoration. b> Restore on an HP b> Insert the HP recovery disk. Restart the computer, and press the "F11" key. Press the "F" key to "reinstall factory settings." If your computer's operating system is damaged, you may only see "perform a full system recovery" as an option. In this case, press "R." Insert any disks if prompted by the restoration program. Otherwise, permit the computer to restart as needed. b> Restore Via Disks (Generic) b> Insert the "Recovery Disk" or "System Recovery Disk." If you have more than one disk, make sure you insert "Disk 1" or "Part 1." Press any key to boot from CD if prompted to do so. Choose a "Full System Restore," "Restore Factory Settings," or another option worded similarly. Confirm that you want to perform the restoration. Press "Next," "Yes," or "OK," as needed. Press "Finish" or "Restart" when prompted by the computer. Hope this helps.

Dec 23, 2012 | Computers & Internet

1 Answer

Restoring computer back to factory settings


no. restoring back to factory settings means it will be back to when you first got it. windows will be installed along with whatever software and programs the manufacturer put on.

Nov 13, 2012 | Dell Latitude D505 Notebook

1 Answer

I have the "D" file with the information needed to


Hello,

Here is the primary way to restore your notebook to factory setting:

1 Turn on the computer.

2 As the computer starts, press on the keyboard until the Advanced Boot Options menu appears on the screen.
new_note.jpg Note: You must press before the Windows logo appears on the screen. If you press after the Windows logo appears on the screen, the Advanced Boot Options menu will not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen.
3 Press the on the keyboard to select Repair Your Computer on the Advanced Boot Options menu, and then press .

4 Specify the language settings that you want, and then click Next.

5 Log in as a user who has administrative credentials, and then click OK.

6 Click Dell Factory Image Restore.

7 In the Dell Factory Image Restore window, click Next.

8 Click to select the Yes, reformat hard drive and restore system software to factory condition check box.

9 Click Next.
The computer is restored to the default factory configuration.

10 When the restore operation is completed, click Finish to restart the computer.
The software is now installed as it was when the computer was first received.
If you have tried this and you still can get your system to restore, your may restore partition may be corrupt, you may also have a virus that is preventing you access to the restore files. Run an AV agent and retry your retore. If you still have the system disc that came with your notebook, you should be able to use them to restore the unit back to factory setting. Good Luck C2Solutions

Jan 24, 2011 | Dell Vostro A860 Notebook

1 Answer

Im trying to get my pc to go to its original settings factort restore


The only way to restore your computer to factory setting with all the software/bloatware as it came with your computer the first day you start it up, you will need the factory restore disk that came with the computer if one is provide, if not usually with e-machine product, which doesn't provide you with a factory restore disk, you will have to create one yourself using a dvd-r. Usually you will have to go the the emachine recovery/back up management option in your menu programs and use that program to make the factory restore disk, after making that disc, you will need to insert the disc, and shuit down the computer and restart it. It will prompt you to follow direction once the factory restore disk is boot up. Follow the directions and you should be good to go. If there isn't a recovery managment program or a factory restore disk provided, you will need to contact emachine up.... usually they can send you factory restore disk for a small fee.

Jan 20, 2011 | E-Machines (T2958) PC Desktop

2 Answers

How do you Reboot a computer back to factory setting


Instructions Things You'll Need:
  • Factory Settings CD
    How To Use the Restore Factory Setting CD
  1. Step 1 Make sure to transfer all of the files you want to keep to a USB memory stick or burn to a CD.
  2. Step 2 Put the "Restore Factory Setting CD" into the CD drive. This CD was packaged with your computer.
  3. Step 3 Confirm you want to restore the factory settings. The computer will begin restoring all settings. Don't disturb your computer, as this process can take several hours. .
  4. Step 4 Reboot the computer to complete the process.
  5. How to Reboot Using the Computer Start-Up
  6. Step 1 Turn on your computer. Right away there will be a black screen. You can restore factory settings without a CD, too. This will reset your BIOS.
  7. Step 2 Press "F1" when the black screen appears to enter the setup configuration mode. You will be presented with a menu.
  8. Step 3 Select "Restore Factory Defaults." That's it. Your computer will do all the work for you. Like the CD, this process may take several hours.

Jan 27, 2010 | Computers & Internet

1 Answer

How do i restore factory settings to my packard bell desktop


If you want to restore your computer to factory settings, and you dont mind losing your files, you will need to get the cd recovery disc, put it in the cd-rom drive and reboot your computer. it will start the process from there.

beware, it will erase everything that currently is on there and when finished bring the computer to the original factory settings.

Apr 16, 2009 | Computers & Internet

Not finding what you are looking for?
Microsoft Windows 7 Home Premium 64BIT Operating System Software  OEM DVD Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...