Question about DISH Network IR Remote Control

2 Answers

Just bought a vizio tv Model #E470VLE, my dish remote will not control the mute or volume buttons now, how do I get it to do that?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • DISH Network Expert
  • 146 Answers

Hey there, Cheri Torres with DISH Network Customer Service here. It sounds like you are going to need to readdress your DISH remote to your new Vizio TV. We have a few different codes for each of our different models of remotes. You will be able to locate the model number of your remote on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for Vizio TVs as well as the instructions for addressing the remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at Cheri.Torres@Dishnetwork.com.

Codes for Vizio TVs
3.0, 3.1, 3.2, 3.4 IR remotes - 505, 671, 627 and 766.
5.0, 5.2, 5.3, 5.4 IR remotes - 627, 505, 506, 457, 111 and 520
4.0 and 4.4 IR/UHF remotes - 505, 627, 555 and 766
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 627, 505, 678, 825, 520 and 766
20.0 IR and 21.0 IR/UHF remotes - 505, 598, 627 and 773

Instructions for addressing your remote to your TV.

  1. Turn the Television On.
  2. Press and hold the TV mode button until all other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Posted on May 22, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Visio TV ModelVW32LHDTV40A with original remote. No model number on remote. TV was hand me down, no paper work. Need codes please help. Thank you

Posted on Jul 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New Vizio 19" TV I need to get the code into the


Hi there, Cheri Torres with DISH Network Customer Service here. I came across your post recently and wanted to see if I could help. We have a few different codes for each of our different models of remotes. The model # of your remote should be located on the back of the remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best codes for our more popular models of remote and the instructions for addressing the remote to your TV. I hope you find this information useful and if you have any further questions please let me know!

Remote Model # Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 505, 165, 671, 627, 520, 758, 766.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 627, 505, 506, 006, 457, 520.
4.0 and 4.4 IR/UHF remotes - codes 505, 627, 766, 864, 593.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 627, 505, 678, 458, 825, 758, 520, 766.
20.0 IR and 21.0 IR/UHF remotes - codes 505, 598, 627, 523, 520, 720.

Instructions for addressing the remote to the TV
  1. Turn the Television On.
  2. Press and hold the TV Mode button until all the mode lights light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once.
    Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Sep 04, 2011 | DISH Network EZ Remote Remote Control

1 Answer

I just had my home change from Fuse to Breaker and my Dish remote is not providing volumne on my TV


I came across your post, pauline_h716, and I'd like to provide some assistance! If you could let me know what kind of TV you have (for example, Sony, Vizio, etc.), I can give you the codes to get the remote programmed. In the meantime, follow these steps and let me know if you have any questions:

  • Remote: Basic Remote (Television Only)
    1. Turn the Television On.
    2. Press and hold the TV Power button for three seconds until the LED flashes.
    3. Press and release the TV Power button.
    4. Press and release the Up or Down Arrow on the remote until the television turns off.
    5. After the television turns off, press and release the OK button.
    6. Test functionality with the TV.
    7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Hope that helps!

Jul 25, 2011 | DISH Network IR Remote Control

1 Answer

Trying to program a dish remote to work with a vizio tv


I came across your post, cmiller46, and I'd like to help you with that! To get your remote programmed to the TV, follow these steps and let me know if you have any questions about this process:
  • Remotes: Basic (Television Only)
    1. Turn the Television On.
    2. Press and hold the TV Power button for three seconds until the LED flashes.
    3. Enter the three-digit code using the buttons on the number pad.
    4. Press OK Note: The LED will flash three times.
    5. Test functionality with the TV.
    6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
For the TV code, try the following from top to bottom:

506
505
627
593
181
500
756

One of those should be the correct one.

Hope that helps!

Jul 11, 2011 | DISH Network IR Remote Control

2 Answers

Need remote code for E470VLE so can control TV with Direct TV remote


The remote codes can be found here:

http://www.directv.com/DTVAPP/content/remote_codes

You said what TV, but not which remote.

Happy hunting.

Jul 06, 2011 | Vizio VO47L 47 in. LCD TV

1 Answer

Bought a vizio tv works good it but the volume control is real hard to get it to pick up every thing else works ok. It has the right code in.


Hey sherryg98, it sounds like you have a right code, but may not be a code to give full functionality as there are many codes for a Vizio TV.

You can check out this link for more info on codes: http://www.dishnetwork.com/SupportSection/remote-setup

Some codes you can try are 627, 766, 505, 006, 232, 458, 500, 670, 678. Depending on the model of your remote there may be different codes available. I've given the steps to address a remote below just in case.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

If you need any further assistance let me know here or email me at thomas.faust@dishnetwork.com

Jun 15, 2011 | DISH Network IR Remote Control

1 Answer

I have a new remote from dish , i need to program it to a vizio tv can you help


Hi, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remote. You will be able to find the model of your remote on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for each of our more popular models of remotes and also the instructions for addressing your remote to your Vizio TV. I hope you find these codes and instructions useful and if you have any further questions or concerns feel free to email me at Cheri.Torres@Dishnetwork.com. Thanks and have a great day! :)

The best codes for each model of remote
3.0, 3.1, 3.2 and 3.4 IR remotes - 505, 671, 627, 677 and 766
5.0, 5.2, 5.3 and 5.4 IR remotes - 627, 766, 505, 000, 457, 111, 506 and 520
4.0, 4.4, 6.0, 6.2, 6.3 and 6.4 IR/UHF remotes - 627, 505, 678, 758, 520, 766 and 507
20.0 IR and 21.0 IR/UHF remotes - 505, 598 and 627

Instructions for addressing the remote to the TV
  1. Turn the Television On
  2. Press and Hold the TV mode button until all the mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once.
  5. Note: The LED will flash three times.
  6. Test functionality with the TV
  7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Feb 17, 2011 | DISH Network IR Remote Control

2 Answers

I need the code for a vizio tv. not in my book


I need the code for memorex dvd player to program it to my dish network remote

Jan 05, 2011 | DISH Network IR Remote Control

1 Answer

My friend has a Vizio model E470VA and Dish network. But the Dish remote will not control the volume / mute on the tv reliability. The on/off button works perfectly. Remote has been replaced also...


Hello, my name is Becki Barned, and I am with Dish Network customer service. To program the remote to a Vizio tv, there are a couple approaches that you may take. First is, follow this link: http://www.dishnetwork.com/SupportSection/power-scan-instructions which walks you through it. Or do these steps: 1. Hold down the TV mode button until all mode buttons at the top of the remote light up, then release. 2. Punch in the code 505. 3. Press the pound (#) button on the keypad. Use either of these, and that remote will work great! Just make sure after you get the volume working, that you press the SAT button on the remote! If you have any other questions, blog back, or you can find us on Twitter!!!!

Dec 18, 2010 | DISH Network IR Remote Control

4 Answers

Not able to program vizio remote towork with att uverse Cisco box


Hi,
Maybe too late for you but ATT just gave me a code that works with my Vizio plasma. Code is 1343. Even the mute works correctly. They gave me some others to try but I didn't need them. Other codes were 1018, 0030 and 0056.

Mar 19, 2009 | Vizio VO47L 47 in. LCD TV

Not finding what you are looking for?
DISH Network IR Remote Control Logo

1,831 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...