Question about Amana Refrigerators

1 Answer

We never received a manual and now need to replace the water filter. model no. ASD2522WRW03 - ser. no. S01831393. also how do we order a replacement manual

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Amana Master
  • 5,056 Answers

The direct link to the manual from Amana is http://www.kitchenaid.ca/assets/pdfs/literature/User%20Instructions%20-%20W10237701A.pdf . If the direct link doesn't work, start here: http://shop.amana.com/product_literature/search_results.jsp?searchTerm=ASD2522WRW03&siteCd=AMA&userType=Consumer . The manual is also available at Manage My Life: http://www.managemylife.com/mmh/owner_manuals/17324/AMANA-Side-by-Side-Refrigerator-L1002225?brand_name_search=ASD2522WRB03+AMANA .

The filter you need is T2RFWG2 and P2RFWG2 (part number 4396841) . The filter is in the base grill on the freezer side of the side by side. There is a cap over the filter. You need to push the release button on the cap to remove the cap and filter. Save the cap and put it on the new filter before replacing the filter. If you replace the cap, you can use the water and ice dispenser without the filter.

If you want a printed copy of the manual, you can order it from Sears Parts Direct. They also have the filter. See http://www.searspartsdirect.com/partsdirect/part-model/Amana-Parts/Refrigerator-Parts/Model-ASD2522WRW03/1268/0165000/W1009009/00001?blt=06&prst=&shdMod= . The manual is part 1 ($5.99) and the filter is part 30 ($54.98). The filter is also available from Partstore.com http://www.partstore.com/Model/Maytag/Maytag/ASD2522WRW03.aspx for $37. Amana sells the filter here: http://www.amana.com/accessories/refrigerators/water_filters/refrigerator_water_filter___in_the_grille_fast_fill_push_button_4396841.pro?scr=category for $40. If you go here: http://www.amana.com/accessories/refrigerators/water_filters.cat , you can order several filters at once.

I hope this helps.

Cindy Wells

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jenn-Air Refrigerator JS42SEDBDA Model 12606032GJ was in house when I brought house. No user manual. Does this model have a water filter? The refrigerator has the words water filter,and underneath that...


Remove the compressor cover to locate the filter.
www.appliancepartspros.com has the filter.
http://www.appliancepartspros.com/Appliance-Parts/whirlpool-refrigerator-water-filter--puri-clean--item-number-ap4343710.aspx

Aug 20, 2011 | Jenn-Air JS42SEDBDA Stainless Steel Side...

1 Answer

I've got a side by side Whirlpool refridgerator. The Water Filter status light is not indicating. What could be the problem and solution?


There are several pages that explain dispenser programming. This is on page 10 of the owners manual.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change

your water filter. When the water filter status display changes from

"GOOD" to "ORDER," this tells you that it is almost time to

change the water filter cartridge. Replace the water filter cartridge

when the water filter status display changes to "REPLACE." If

water flow to your water dispenser or ice maker decreases

noticeably, change the filter sooner. The filter should be replaced

at least every 6 months depending on your water quality and

usage.

After changing the water filter, reset the status light by pressing

and holding the FILTER button for 3 seconds. The status light will
change from "REPLACE" to "GOOD" when the system is reset.

Changing the Water Filter

1. Press the eject button to release the filter from the base grille.

2. Pull the filter straight out.

3. Turn the cap counterclockwise to remove it from the filter.

IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

4. Align the ridge on the cap with the arrow on the new filter and

turn the cap until it snaps into place.

NOTE: You can run the dispenser without a filter. Your water

will not be filtered. Simply insert the cap all of the way into the

base grille and rotate the cap until it is firmly in place.

5. Remove the covers from the O-rings. Be sure the O-rings are

still in place after the covers are removed.

6. Push the filter into the base grille. The eject button will pop

back out when the filter is fully engaged.
7. Flush the water system. See "Water and Ice Dispensers."

Water Filter Status Light:

The water filter status light will help you know when to change your water filter.

When the dispenser control panel's water filter status display changes to "ORDER," this tells

you that it is almost time to change the water filter cartridge.

Replace the water filter cartridge when the water filter status display changes to "REPLACE."

The filter should be replaced at least every 6 months depending on your water quality and usage.

NOTE: If water flow to your water dispenser or ice maker decreases noticeably, change the

filter sooner. After changing the water filter, reset the status light.

Details:

Pressing and holding RESET FILTER starts the 3 seconds countdown. Using the dispenser

cancels the countdown AND no dispensing is permitted. The number '3' blinks 3 times and the

'invalid' tone sounds 3 times and user has to release both the pad and the button and press

the button again to start it over

After 3 seconds, the BLUE WATER BARS in the Icon flash and an audible tone sounds 3
times. When the system is reset, the "ORDER" and "REPLACE" icons will disappear from the

display screen. See figure 16.
Note: Users can reset the filter status at any stage.

sea_breeze_131.jpg

If you should need the complete and exact model number and manual with parts manual you will need to enter the Model Number here=> sea_breeze_132.jpg Manuals, Guides and Instructions Please rate this solution, Thanks, Sea Breeze
User manual click HERE

Apr 02, 2011 | Whirlpool 25.6 cu. ft. Side-by-Side...

1 Answer

The fan is not working, what should I do?


there two fans 1 inside the freezer and other down by the compressor . both are not hard to replace but do order it by model and ser # because there are ac and dc motors an cw and ccw motor. and they all look the same . some are 9 to 12 volts and 110 v . so do order the correct motor . for your model . if more help is needed need model & ser # of your unit .. mm feed back pls ..

Dec 11, 2010 | KitchenAid (KSRD22FKST) Side by Side...

1 Answer

Have a water filter by culligan ..a 01014042 ser # 0703k0196 need a user manual


This is a Medallist series water softener. Her is the link to Culligan for your owners manual.
http://www.culliganwater.com/residential/resources/timers_manuals.php
For future reference it is more helpful to provide the Model and the year it was installed.
RJ

Sep 09, 2010 | Culligan Sediment Water Filter

1 Answer

I have Kitchenaid Model KSRG25 and need water filter replacement. Need number of water filter to order


If it is the model KSRG25FK, the following filters will work:

4396510 (best filtration)
4396508 (standard filtration)

May 20, 2010 | Refrigerators

1 Answer

MAKING ICE BUT ICE AND WATER DISPENSER QUIT WORKING.


Sounds like a plugged water filter, assuming the water is turned on to the fridge. If you have a manual, refer to the section about water filters. The filter is usually accessible from the front of the fridge at the bottom....requires about a 1/2 turn counter-clockwise. Some units require that the water be turned off first but not all.

If you do not hear a click when activating the dispenser, there could be an issue with the water solenoid (water valve) that opens and closes when you use the water dispenser....agai...check the manual if at all possible.

Apr 17, 2009 | Frigidaire Refrigerators

2 Answers

How often do I change the water filter


i cant even find a filter on your machine, if there is one, there will be a model number on the filter itself as well as re-order information.Once a yr , you shhould change

Dec 07, 2008 | Refrigerators

1 Answer

The solenoid on the water inlet valve leaks... need illustrated parts list so I can order proper parts assembly


you have the info rite / it is called the water inlet solinoid valve. this along with the mod. ser. # is all you nead to order the replacement valve. hope i was a help

Oct 20, 2008 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Steve

Level 3 Expert

3287 Answers

Are you an Amana Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...