Question about Ganz DR4NC-160 DVR DIGITAL VIDEO RECORDER CCTV USED

3 Answers

I changed the admin password on my sentient cctv dvr from the default 123456. I saved the changes but now get the message incorrect password when I input the six digit password I stored. Please help

Posted by on

  • 4 more comments 
  • colin_bunyan May 23, 2011

    This is not the solution to the problem with my Sentient N79GW cctv dvr. It is not a Ganz at all. Thanks

  • colin_bunyan May 23, 2011

    I received advice for the resetting of the password to default for my Sentient N79GW DVR. Unfortunately, the advice I received was not a solution because it was for a different Make of DVR and does not work in my case. The problem still exists.
    Thank you

  • colin_bunyan May 24, 2011

    Hi Thank you for the information. I don't know where the Ganz came from. My original query stated that it's a Sentient DVR. I appreciate your time anyway.

  • Anonymous Mar 13, 2014

    CNM Primus 4 channel CCTV admin password reset

  • Anonymous Mar 14, 2014

    how may i reste this????

  • LIZ FOLAN
    LIZ FOLAN Aug 07, 2014

    can any body tell me how to reset the password on my N79GW cctv dvr i cant get into any settings please help

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I changed the admin password

I changed the admin password on my sentient cctv dvr from the default 123456. I saved the changes but now get the message incorrect password when I input the six digit password I stored. Please help

Posted on Dec 21, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

Http://computarganz.com/product_view.cfm?product_id=389

Hi at this link above is your manual. In this manual it shows you how to reset the password.

Posted on May 23, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ganz Master
  • 74,383 Answers

Hello

After system boot-up, hold a right mouse click

button and there will be login window. Hold a left

mouse button to click the order of "Account", and

input correct account. Then left click the order of

"Password" and input correct password. At last

left click "Login" to enter system. There is one

factory-preset login "account/password"
"admin/111111" at admin level. The user can
use it to login the system for the first time

Posted on May 23, 2011

  • The Knight
    The Knight May 23, 2011

    In setup menu display, move the crusor to change the highlighted option to Accound and then press button [SEL] to call up Account/Password. All numbers, letters, and sign in the pane can be used as user account or password. Press [SEL] to input value, and move the prompt to the option of "Enter", press [SEL] to confirm.

  • The Knight
    The Knight May 23, 2011

    I've no other solution to advice you. OK.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My CCTV is showing hacked on the cameras. How do I reset my password


Your CCTV is connected via an Internet connection.
I'll recommend to isolate the network devices from the Internet before continuing.
This is covering only basic steps, I recommend to get the instruction manual for the CCTV and read it.
  1. Enter the administration section of the CCTV recorder/DCR/NVR by entering your admin account name and password.
  2. Go to the admin setup of the CCTV. Search for overlay and verify if the hacker inserted text on the overlay feature, if you don't use overlay, disable it.
  3. Then check each camera name tags in the admin section. Change the text if it was hacked.
  4. Change the password for the CCTV DVR/NVR/Camera, I bet it was never changed. Write the password down and store it in a safe place.
  5. Last option: If you can't find the place do a factory reset of the DVR/NVR/Camera. (Do make a backup before a factory reset to an external device if possible).
  6. Once the factory reset is done, you will have to reconfigure the recording options for each camera.
  7. Last point after the factory reset, change the admin password.
Are there other devices sharing the Internet connection with the CCTV?
If this answer is YES, then check them for hacker breach.
  1. I'll recommend to increase the security on the Internet Router.
  2. Any device sharing the Internet with the CCTV should be checked for breaches and made secure.
  3. Speak to your ISP and ask for assistance if you have a fixed IP address to your CCTV system. Ask them for advice. Layer 7 routers are more expensive but more secure.
  4. Load all updates for any devices!
Get an IT security expert to assist you with the breach if necessary.

Sep 29, 2017 | The Home Security

1 Answer

Gamut cctv recorder admin password


To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart's. After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time.

Apr 04, 2017 | Computers & Internet

1 Answer

How do I reset my DVR? It is a Sentient (KGuard EL821) 8 ch DVR and it keeps rebooting once a minute. The mouse and remote do not function and I cannot get to the menu.


By Default Kguard EL821 Password is 123456

but if you forget:- To obtain the factory default password, contact your retailer or directly send an email to KGUARD at support@kguardsecurity.com. CCTV Networking Technical Support https://fast.ulmart.ru/manuals/674188.pdf

Aug 17, 2014 | Home Security

1 Answer

H264 dvr password


I forget the password of my sentient cctv h.264 please help me

Jan 12, 2014 | Night Owl Optics Night Owl Scorpion 168500...

2 Answers

I have a sentient cctv dvr from Maplin I can view it on my phone at home which is fine I wanted to know if I can view camera footage when I'm not at home etc. at work


Yes you can definitely view your CCTV footage on your mobile phone at your work via internet. Sentient CCTV DVR basically is a night vision camera. You must know the IP of the camera and IP Video server. Connecting your phone to CCTV camera via the protocol you can view the CCTV footage's in your phone. Night vision cameras are used for surveillance purpose. I would prefer cctv camera with ir illuminator for good image quality in the night time that will clear footage quality in my phone.
Recently many new applications have also being launched by security cameras with a view to solve problem you mentioned.

Jul 05, 2013 | Home Security

1 Answer

Ive got a sentient 4 channel network dvr h.264,during the instillation i entered a password but now i cant remember it pls can anyone tell me how to reset it


Try following standard account passwords comes with the unit, I've had a similar problem 999999 worked for me.
power 999999, police 111111, admin 123456, guest 000000.

Oct 03, 2012 | Home Security

3 Answers

Reset kguard password


this will get you through the front door Please try this temporary password 519070 to login this will let you get to the admin pass word page so that you can change it i found it on cctv.com page but it takes 7 trys to load the cctv page so im going to post it here for safe keeping

Oct 24, 2011 | KWorld Kguard KG-SHA116 Video Surveillance...

1 Answer

Just installed a sentient 250gb cctv dvr system, cannot get the dvr box to display on tv even with specific cable bought from maplins and hdd light is flashing...help


By default it goes to VGA port out of the DVR.
So you could hook up a pc monitor to it and use that. Once logged in you can change to tv out via the desktop menus.
It is also possible to hold down a button on the DVR (cannot remember which one sorry) at DVR power up to switch it to use tv out instead of vga.

Dec 30, 2010 | Cameras

1 Answer

Sentient dvr cctv playback


Hi, I have a maplins sentient model Sentient dvr cctv is there a windows 7 PCviewer programe ?

Mar 30, 2010 | Computers & Internet

Not finding what you are looking for?
Ganz DR4NC-160 DVR DIGITAL VIDEO RECORDER CCTV USED Logo

11,925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ganz Home Security Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Lawrence Oravetz

Level 3 Expert

9742 Answers

Are you a Ganz Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...