Question about Dryers

Open Question

My maytag neptune drying center has a code hp

Posted by on

  • plantapalm Sep 25, 2008

    HP code and dryer shuts down. But only sometimes

×

5 Suggested Answers

  • 1 Answer

SOURCE: Problem with upper cabinent of Maytag Drying Center.

Mine did same thing within warranty. There is a motherboard problem in them that is cause by power surge during an eletrical storm. First try unplugging for 10 minutes and see if it resets. If that doesn't work, you need to have the motherboard replaced that runs the unit.

Repair man took the front off my unit and replaced entire motherboard. He stated that it was a known issue with that motherboard. I have had no problems since my motherboard was replaced 18 months ago.

Posted on Mar 27, 2008

  • 178 Answers

SOURCE: Maytag Neptune Drying Center MCE8000AYW

Email me a response to robert_fawbush@yahoo.com and I will be more than happy to provide you with parts breakdown illustrations and possible part numbers and locations to replace. The service amount verses the do-it yourself amount will be well worth the savings. Typical labor cost on appliances are 75.00 per hour and a mark up on the parts. If you feel you can do it yourself after getting the photos e-mailed to you, it will save you approx 200.00 if not a lil less or a lil more.

Please rate this solution "fix-ya" if it seems to satisfy your question.

Posted on Apr 14, 2008

protek480
  • 1714 Answers

SOURCE: How do you remove the bottom cabinet of a Maytag Neptune Dryer

OR..... you could watch the video...


Posted on Aug 07, 2009

Sea Breeze
  • 4638 Answers

SOURCE: I have a Maytag Neptune MGD9700A dryer. It is LP.

Most times that is a sign that the gas coils are weaking. I am having a little trouble with your model number so I' not sure what your part numbers will be. Get with me later if you should find the model numer to be different. On Maytag they are inside the door. I am not saying that you are wrong but that I could find only this series MGD9700SB0 One coil should be part number 694540 Coil, 60 Hz. (2 Terminal) (Main) and the other part number 694539 Coil, 60 Hz. (Split) (3 Terminal) (Pilot Position) You can find these valve in a larger photo discription on this page=> Seabreeze Appliance Parts just click on photo to enlarge.

This is the 694540 and you can find Here=> 694540

daaffda.jpg And here is the part 694539 Gas Valve
Click Here=> 694539
b7ef152.jpg If you have questions you may contact me here on Fixya or my Forum=> Appliance 911 My contact information is located above the Fixya Ad on my blog here=> Sea Breeze Appliance Parts and Technical Services, Thanks, Sea Breeze

Posted on Jan 20, 2010

  • 1 Answer

SOURCE: Maytag MCE8000AZW Neptune Drying Center. Display

my bottom dryer the light dont come on or when i press start it wont start all i hear is a click...any solutions?

Posted on Jun 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to maytag neptune drying center mcg8000aww


Sounds like the thermal fuse is open, which generally means the vent is clogged

Aug 31, 2014 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

Looking for part 31001666 for the Maytag Neptune Gas Drying Center


Try: partselect.com If they do not have it will probably be a good referral resource.

Sep 23, 2013 | Maytag Neptune MCE8000AY Electric Dryer

1 Answer

Maytag MCE8000AZW Neptune Drying Center. Display


my bottom dryer the light dont come on or when i press start it wont start all i hear is a click...any solutions?

Jan 31, 2010 | Maytag Dryers

1 Answer

I have a neptune drying center and it's taking 3 hours to dry


Check the exhaust duct again. There must be a blockage, a kink, or a disconnected vent pipe.

May 03, 2009 | Maytag Neptune MCE8000AY Electric Dryer

1 Answer

MCG8000AWW Neptune Drying Center initially has heat, then not


hey u burned the ingniter with all that lint, so just buy it around $100 , replace it and back in business.

Feb 28, 2009 | Maytag MDG21PD Electric Commercial Dryer

1 Answer

Maytag neptune dc


I have a Maytag Neptune drying center. The top unit is making a very loud banging noise. How can it be repaired, is this a common problem?

Apr 18, 2008 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Maytag Neptune Drying Center MCE8000AYW


Email me a response to robert_fawbush@yahoo.com and I will be more than happy to provide you with parts breakdown illustrations and possible part numbers and locations to replace. The service amount verses the do-it yourself amount will be well worth the savings. Typical labor cost on appliances are 75.00 per hour and a mark up on the parts. If you feel you can do it yourself after getting the photos e-mailed to you, it will save you approx 200.00 if not a lil less or a lil more.

Please rate this solution "fix-ya" if it seems to satisfy your question.

Apr 14, 2008 | Maytag Neptune MDE5500AY Electric Dryer

4 Answers

Maytag Neptune DC Model# MCE8000AYW leaks water from the right side of drying center unit while using the "Wrinkle Release Hanging Dry Only" feature. The leak happens during the steam portion of the cycle....


Stop using the water bottle because the water is overflowing the heater steamer pan and will short the heating element and the part is no longer avaliable and the top will stop drying.

Mar 27, 2008 | Maytag Neptune MCE8000AY Electric Dryer

1 Answer

Problem with upper cabinent of Maytag Drying Center.


Mine did same thing within warranty. There is a motherboard problem in them that is cause by power surge during an eletrical storm. First try unplugging for 10 minutes and see if it resets. If that doesn't work, you need to have the motherboard replaced that runs the unit.

Repair man took the front off my unit and replaced entire motherboard. He stated that it was a known issue with that motherboard. I have had no problems since my motherboard was replaced 18 months ago.

Dec 02, 2007 | Maytag Neptune MCE8000AY Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...