Question about Computer Cases

1 Answer

Wedding Ring Fell Between Two Wooden Deck Beams

My wooden deck's beams are about 3/8" apart and my wedding ring fell right between the beams!

Luckily about 6" down the roof of the unit below us begins (so i can see the ring if i look between the beams).

Unfortunately I don't know what tool i can use to grab it (I have one of those tools that pick up screws, but the width is too big.... i am going to try to purchase a smaller one today).

The ring is titanium...... any suggestions?

Posted by on

  • Olive Brown
    Olive Brown Feb 14, 2014

    Been there, done that. Solution: Straighten coat hanger wire with dble loop bent at one end bent around long nose pliers and fix playdo or similar dough like substance around the loops and the ring will cling to it, and up she comes.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,
places like princess auto have thin really strong "super" magnets at low cost. fold a coat hanger or baling wire around it and go get 'er.....

Bye for now,
redd fraser,
phoenix rehousing.

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intermitant growning noise at45 to 50 mph transfer case area goes away when 4 wheel drive actiated 2006 gmc sierra 1500 4x4


The differential gears have a gap that is adjusted by shims. It is possible that the ring gear is wearing wrong or you have a bearing that is going out.

Feb 22, 2014 | GMC 2006 Sierra 1500 SLT

1 Answer

99 Mercury Mountaineer speedometer sensor location


on the inside edge of the brake rotor or spindle look for a wire going behind it makes a signal from a toothed ring

Jul 22, 2013 | GMC bolt. computer control sensors....

1 Answer

Leak between power steering pump and reservoir. What can I do to stop?


Replace the large diameter "O" ring that is in the groove on the pump body.

Jun 30, 2013 | GMC 02 03 04 05 Envoy Chevy Trailblazer...

1 Answer

I am getting a blank screen. I can reset the device and go to the menu options but once i download the form deck and form agent it boots back to the white screen


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error
also
click start control panel administrive tools computer management device manager scoll to ports(com&lpt)right click to scan for hardware changes or scroll to monitors + to expand plug and play monitor right click where you have options to update driver,disable.uninstall,scan for hardware changes or select properties where in the general you have the option to troubleshoot also in the driver tab you have the same options as when you first right click on monitor
also
click start control panel,display,desktop you can select a different desktop from the drop down list also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settings
always click APPLY after making any changes
hope this helps

Mar 23, 2011 | VeriFone MX830 SC TCH Signature ETH...

1 Answer

Prob with headphone


I assume that u replaced or tried a different ear phones?
The female SOCKET on those things are small and special..Imagine a question mark [ ? ] one facing left, the other facing right, One just slightly BELOW the other. You wil notice that the MALE has a metal tip, a RING of plastic, then another metal ring with the plastic holder at the other end [the wires extends out of this end]
If you can see down the hold, u may see the two(2) "" question Marks "". The 1st metal tip should touch the lowest and the 2nd metal ring on male plug touches upper "" ?? "". push plug in and SLIGHTLY move around while the unit is ON AND PLAYING MUSIC. If the unit can be heard in stero, then the INNERS are loose. If the female socket moves, then one of your contacts are "desoldered" called " cold solder joint. u may need a tech.
Delicated operation!!!

May 01, 2008 | RaidMax Samurai 908 Yellow Mid Tower ATX...

1 Answer

Experiencing problems with my phone


your best bet would be to ring your sevice provider and get them to send the setting via sms

Feb 22, 2008 | Computer Cases

1 Answer

Eleictrices


You have wired it wrong.
Take all the connections apart and start over. Especially look for bare wires outside the connectors.
This is especially dangerous, so you may be better off getting some help.

Nov 28, 2007 | Computer Cases

1 Answer

Extra red color in moniter graphics


Hi, is this a CRT monitor? If so get rid of it, there are 3 color beam projectors in the back of the tube if one goes out of commision all color changes and is not worth fixing, second hand CRT monitors are cheap so get one ASAP. Goodluck mistyman

Sep 09, 2007 | Computer Cases

Not finding what you are looking for?
Computer Cases Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Cases Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Are you a Computer Case Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...