Question about Dryers

1 Answer

Just changed my belt on idv65 dryer and the connections popped off before i could take a picture

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

Place belt round drum near mark left by old one, lean on front of drum to lower drum to the motor spindle,pushing hard down on drum will bend the drum on the inside as it touches the motor housing (don't worry it bends back),you should then have the drum close enough to the spindle to put the belt over by hand,pull drum back up,rotate by hand to let the belt self align,shouldn't come off spindle if you put it on with 3-4 grooves spare. Hope this helps Tim

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Indesit idv65(uk) making humming noise - motor not starting - replaced capacitor and belt


if the motor doesn't start and makes a humming sound you either have something stuck in the blower wheel from starting the dryer with the lint filter out or the motor is bad,so either something is jammed and stopping the motor from spinning or the motor is bad.

Oct 04, 2017 | Indesit Dryers

2 Answers

Indesit idv65 tumble dryer squeaking really loud


hi check drum bearing to see if worn

Jan 21, 2014 | Dryers

1 Answer

Indesit idv65


dryers have bearing or rolls and they might need to be replaed also sometimes the blower will round out on shaft and make noise

Nov 15, 2013 | Dryers

1 Answer

My indesit tumble dryer idv65 runs for 10 mins and then trips the electric and stops


if its an old dryer its probably the motor thermostat heating up and shutting the motor down ,replace that or even the motor

Jan 14, 2013 | Dryers

1 Answer

Wiring diagram for indesit tumble dryer idv65


i have put a new belt on and can not find which wires go where

Jul 19, 2012 | Dryers

1 Answer

How to access belt on indesit idv65 tumble dryer


Indesit tumble dryer not turning? How to replace a Indesit tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. Tumble Dryer Belts How to Repair Home Appliances

Jun 22, 2012 | Dryers

1 Answer

Anyone have a picture of connections for a indesit idv65 tumble dryer,changed my belt and they fell off before i could take a picture of them


undo all of front (leave wires attached),,,, undo sides (take screws out of left and right sides approx 10 screws at back),,,,place belt round drum near mark left by old one,,,, lean on front of drum to lower drum to the motor spindle,,,,,,pushing hard down on drum will bend the drum on the inside as it touches the motor housing (don't worry it bends back),,,,,,,you should then have the drum close enough to the spindle to lever the belt over by hand,,,,,pull drum back up,,,,,rotate by hand to let the belt self align,,,,shouldn't come off spindle if you put it on with 3-4 grooves spare,,,,,, do back up (10 screws),,,,put front back on and pull drum onto the lip on the front of the frame, the new belt may be squeaky until it is wore in, Hope this helped Tim

May 28, 2011 | Bosch Dryers

1 Answer

Hi i went into my dryer and pushed the tumbler the wrong way and heard something pop and now the tumbler doesnt rotate how do i get to the belt this dryer is very old but looks like this one .thank you oh...


You broke the belt. To replace it, pop the top ... use a screw driver. Remove the screws at the top of the front, remove the front, the drum will fall free. Take Pictures.

Feb 14, 2011 | Kenmore 65924 Electric Dryer

2 Answers

Manual for indesit idv65 tumble dryer


This was very difficult to find, but I found it just for you! Please make sure you rate my answer 4 thumbs up! Thanks so much for understanding, it would be a huge help to me. I would be forever grateful if you could do this for me. To view the manual you will need adobe reader, which you can get for free from http://get.adobe.com/reader/ You probably already have it though, please try opening the file first and find out. If you require some other manual, the file doesn't work, or this isn't what you are looking for PLEASE reply to my answer here and I will correct it for you. Here is the manual / guide please give it a few minutes the file is quite large:

http://micromatikal.dlinkddns.com:8000/cust/idv65.pdf

Thanks
Tim

Oct 15, 2010 | Microwave Ovens

Not finding what you are looking for?
Dryers Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

16195 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...