Question about Office Equipment & Supplies

1 Answer

I have recently flashed my scx 4300 with firmware 1.13 while the original firmware was 1.22. I had done so because fix for my version was not available. Now the printer has started showing scanner error and also makes some noise while warming up. Kindly provide a solution or if possible, make available appropriate fix

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

You need to return to the version 1.22! After you go to: www.siliconguide.com/drivers/device/1404

and download the printer driver for your system in use and after the scanner driver for the system you use, then down load DR. Printer and installate it from your download folder to your computer (this avoid that you lose it direct via installation) then reboot your computer and try.

Posted on May 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset scx 3400


dear Search in the net.
go to tech mode -scroll to flash up date-select local. Drop and down the firmware.
Thanks.

May 26, 2014 | Samsung SCX-4300 Monochrome Laser...

1 Answer

Samsung scx-4300 toner low problem


reset you printer with fix firmwares.and but you first underestand your machine firmware version with print report

Oct 11, 2013 | Samsung SCX-4300 Monochrome Laser...

1 Answer

When I start my SCX-4300, printer is OK, but from scanner I can hear sound as ta-ta-ta-ta-ta-ta. & shoes scanner error. this is happening for when i downgraded firmware from 1.21 to 1.13 pls help


you update wrong version. always take system data printout from "ready tech" and report menu.
there shows firmwire version.and after that you flash the exact crack firmwire.
for any help you can call me on this number : 9437082724.
AVAYA KUMAR SAHU.

Feb 09, 2011 | Samsung SCX-4300 Monochrome Laser...

1 Answer

I have samsung scx 4300 laser printer and after refill it show the message "toner exausted" but there is no chip on the cartridge. plz help me how to reset the chip inside and fix the problem.


This is a link to view how to reset: http://www.youtube.com/watch?v=Qzc9JImUcak
This is a link to download firmwares (version 1.13, 1.16, and 1.18_fix) and download software to update firmware files to printer: http://dox.abv.bg/files/listtree

MOST IMPORTANT:
1. Push 8 times button MENU then OK to print a report and view your version of firmware
2. REPLACE FIRMWARE VERSION 1.13 ONLY WITH 1.13_fix
3. REPLACE FIRMWARE VERSION 1.16 ONLY WITH 1.16_fix
4. REPLACE FIRMWARE VERSION 1.18 ONLY WITH 1.18_fix
5. REPLACE FIRMWARE VERSION 1.21 ONLY WITH 1.18_fix
6. DO NOT REPLACE FIRMWARE VERSION 1.23, I DON'T HAVE FIRMWARE VERSION 1.23

IF YOU REPLACE FIRMWARE VERSION WITH WRONG VERSION A "SCANNER ERROR" OCCURS AFTER SEVERAL MONTHS WHICH MEANS YOUR SCANNER MATRIX IS BURNED OUT AND MUST BE REPLACED

GOOD LUCK!

Jan 24, 2011 | Samsung SCX-4300 Monochrome Laser...

3 Answers

Samsung scx 4300 toner reset software download


my printer scx4300- problem for toner empty or replacement toner, but toner is refiled. this download software

Jan 11, 2011 | Samsung SCX-4300 Monochrome Laser...

10 Answers

Samsung scx-4300 error message "toner exhausted" how to reset printer


You need to change the software of your printer by going to TECH mode and sending some files to the printer.Give me you email so i can send you the instructions and the software if you want to.

Oct 20, 2010 | Samsung SCX-4300 Monochrome Laser...

1 Answer

Where i can find fix program for samsung scx-4300


This is a link to view how to reset: http://www.youtube.com/watch?v=Qzc9JImUcak
This is a link to download firmwares (version 1.13, 1.16, and 1.18_fix) and download software to update firmware files to printer: http://dox.abv.bg/files/listtree

MOST IMPORTANT:
1. Push 8 times button MENU then OK to print a report and view your version of firmware
2. REPLACE FIRMWARE VERSION 1.13 ONLY WITH 1.13_fix
3. REPLACE FIRMWARE VERSION 1.16 ONLY WITH 1.16_fix
4. REPLACE FIRMWARE VERSION 1.18 ONLY WITH 1.18_fix
5. REPLACE FIRMWARE VERSION 1.21 ONLY WITH 1.18_fix
6. DO NOT REPLACE FIRMWARE VERSION 1.23, I DON'T HAVE FIRMWARE VERSION 1.23

IF YOU REPLACE FIRMWARE VERSION WITH WRONG VERSION A "SCANNER ERROR" OCCURS AFTER SEVERAL MONTHS WHICH MEANS YOUR SCANNER MATRIX IS BURNED OUT AND MUST BE REPLACED

GOOD LUCK!

Oct 09, 2010 | Samsung SCX-4300 Monochrome Laser...

1 Answer

How to toner refill of samsung scx 4300


This is a link to view how to reset: http://www.youtube.com/watch?v=Qzc9JImUcak
This is a link to download firmwares (version 1.13, 1.16, and 1.18_fix) and download software to update firmware files to printer: http://dox.abv.bg/files/listtree

MOST IMPORTANT:
1. Push 8 times button MENU then OK to print a report and view your version of firmware
2. REPLACE FIRMWARE VERSION 1.13 ONLY WITH 1.13_fix
3. REPLACE FIRMWARE VERSION 1.16 ONLY WITH 1.16_fix
4. REPLACE FIRMWARE VERSION 1.18 ONLY WITH 1.18_fix
5. REPLACE FIRMWARE VERSION 1.21 ONLY WITH 1.18_fix
6. DO NOT REPLACE FIRMWARE VERSION 1.23, I DON'T HAVE FIRMWARE VERSION 1.23

IF YOU REPLACE FIRMWARE VERSION WITH WRONG VERSION A "SCANNER ERROR" OCCURS AFTER SEVERAL MONTHS WHICH MEANS YOUR SCANNER MATRIX IS BURNED OUT AND MUST BE REPLACED

GOOD LUCK!

Oct 01, 2010 | Samsung SCX-4300 Monochrome Laser...

1 Answer

After flashing and reseting with v1.13 firmware,samsung scx 4300 scanner error shown on lcd.


IF YOU REPLACE FIRMWARE VERSION WITH WRONG VERSION A "SCANNER ERROR" OCCURS AFTER SEVERAL MONTHS WHICH MEANS YOUR SCANNER MATRIX IS BURNED OUT AND MUST BE REPLACED

Oct 01, 2010 | Samsung SCX-4300 Monochrome Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8073 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

80407 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...