Question about Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

My iron turns on when I plug it in and the yellow light begins to slowly blink. then the yellow light blinks faster but it doesn't heat even when I change the setting on the dial. Thank you for your help. Felicia

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

This iron seems to have a number of faults. Some people have good success but a large number are completely unsatisfied because of electrical failures (even melt-downs and smoke).

Read reviews.
http://www.amazon.com/Rowenta-DZ9080-Advancer-Iron/product-reviews/B000FHEUWC/ref=cm_cr_pr_hist_1?ie=UTF8&showViewpoints=0&filterBy=addOneStar

Unfortunately, these irons are controlled by a microprocessor and circuit board that cannot easily be replaced (except by Rowenta repair center). Even at the repair centers, it is doubtful that they are actually repairing anything. They are likely sending out new units and looking into why the failed units fail then throwing them away.

Sorry i cannot offer a fix for you. There is nothing in the manual that describes your problem and nothing on-line that offers a fix except a new controller and circuit board.

-Mark

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Heat goes off and red light blinks


Contact Rowenta if the yellow and red LED lights start to blink; this indicates an internal electrical failure.

There are over 200 complaints on the consumer affairs website, that include same this problem.

Its better to be safe than sorry.

Apr 24, 2014 | Rowenta Irons

2 Answers

My Remington Keratin Therapy Flat Iron Doesn't Turn On.


see thi steps and fix it.God bless you
If the iron doesn't heat, make sure 1) power is on to the outlet, 2) check the electrical cord and 3) check the thermostat and replace if necessary. Use the VOM.

10_16_2012_12_30_01_pm.jpg10_16_2012_12_30_17_pm.jpg

Oct 15, 2012 | Remington Style Therapy: Keratin Therapy...

1 Answer

Wont turn on


see this steps and fix it. God bless you
As with many small appliances, regular maintenance makes a dramatic difference in how trouble free your electric iron will be. Even so, things can happen.
If the iron doesn't heat, make sure power is on to the outlet, check the electrical cord, and check the thermostat (see the Appliance Controls Fix-It Guide) and replace if necessary.

10_2_2012_11_57_44_am.jpg

Oct 01, 2012 | Irons

1 Answer

Iron not heating


Hi,

Here is a tip that will help you to troubleshoot our iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Jul 13, 2010 | Rowenta DZ5080 Iron with Auto Shut-off

1 Answer

Why does the iron light blinks when plug in


It shows that the iron is heating up. When the light is steady, the iron is at the set temperature and ready for ironing.

Nov 30, 2009 | Sunbeam 4214 Iron

3 Answers

Electric Blanket Control Blinks


mydual control sunbeam electric blanket blinks on one control

Dec 23, 2008 | Sunbeam 4237 / 4238 Iron with Auto...

2 Answers

My rowenta effective will not heat up.


This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Dec 15, 2008 | Rowenta DG5030 Iron

2 Answers

Blinking red light


This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Sep 06, 2008 | Irons

1 Answer

The light is on...but no heat at all?


This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Aug 10, 2008 | Rowenta Powerglide DE011 Iron with Auto...

1 Answer

Red light flashing


Blinking red light is a standby phase, its not going to get hot like this. Shake it or just start ironing, the red light will go solid and the plate will heat up. The red light will go off when the plate is hot enough. It will go on again (solid) after a few minutes to keep the plate at the right temperature. If you leave it standing around for a while it will begin blinking again (standby).

These irons are known for malfunctioning though, mine stays in standby and the plate never heats up! Hopefully yours is fine.

Feb 07, 2008 | Braun SI6225 Iron

Not finding what you are looking for?
Rowenta DZ9080 Iron with Auto Shut-off Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...