Question about Computers & Internet

1 Answer

The colour appears to be too strong. tried to adjust & also download majic tune & natural color softwaire but this did not work with my computer..samsung 223bw screen...windows xp

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Try a replacement display, sounds like a faulty monitor

Posted on Aug 15, 2008

  • Ginko
    Ginko Aug 15, 2008

    The problem is probably not with windows but with your monitor. Test the computer with a different monitor, so that you can understand if problem is computer or monitor.
    If problem is the computer it is probably a faulty video adapter, as Windows does not offer a real colour adjustment option.
    If problem is the monitor check your user guide and use adjustment buttons to lower color brightness, if this does not lower down brightness you have a faulty monitor.
    Here is manual for a similar model, adjustment procedure should be the same

    SyncMaster 245B / 245BW

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to rectify my hair colour used xxl absolute platinum roots are a lovely colour but rest of hair is orange suggestions in what i can do to rectify the problem


Where you tinting / coloring over a existing color?
It is real important that you navigate / calculate what your natural color level and what natural reflect your hair is. (Not artificially from a previous tint) Because tint is not total matt coverage like paint. Hair color wont tint over tint accurately. This is how many horrific bad colors are born.
If your eyes are blue or hazel & you have a fairer complexion that color is more feasible. If your eyes are brown and your hair is medium to coarser texture and very dark its a lot more complicated because you could throw scaling down (backwards) from lots of red to brassy copper to gold.
The actual formula needed is calculated on how many shade levels of lift counteracted by what reflect your lightened hair will throw. Not necessarily by what color the tint box says. The color shade on the box is a idealistic situation. If your having trouble following me or these complexities cut about 50 strands of hair at the nape (back of neck underneath your hair and put scotch tape around it. Then mix a minute amount of color and developer and you will understand me. This way you can at worse only screw up of 50 strands of hair (instead of everything attached to your head). Bad hair color jobs are expensive to fix & as I can see what we are working with a guess is a hazard. Don't take on almost mission impossible blindly.

Jun 04, 2014 | Schwarzkopf Essensity Permanent Hair...

1 Answer

I have colour problems with my webcam! it doesn't show the colours properly, for instance, my blue shirt appears purple.


you might try to adjust your color profile through windows control panel,display. or when you open the control panel search for color profile

Dec 01, 2012 | A4tech A4-PK333MB WEBCAM 1.3M

1 Answer

E50A10; color become not natural. The red look too strong. Seem like un-balance white balance (white color shown not clearly white but too much red)


Good day!!

I am suggesting you to hit the menu button on the tv itself or on the remote...
then the following will appear:

picture
sound
set up

when you see that please hit the picture then you will read the
AV mode please hit that by hitting the arrow next or up and down volume button so that you can pick what mode do you want also you can change/adjust the bright, contrast,sharp,color, tint...

hope it helps...thank you..

Jun 17, 2011 | Sony Televison & Video

3 Answers

I have a 4 year old WEGA Trinitron HD TV (model # KV- 30HS420) that over the last few months has been switching between full color and color missing green colorations. Most of the time now the full colour...


A good TV repair shop should be able to repair this but given the current price of flat panel TV's you might want to think about scrapping it.
I was a little confused about your description of the fault, one colour disappearing is in a very different area of fault from all colour disappearing. Does it flash into correct colour momentarily if you fine tune it? Is the picture as far as you can tell black and white or does it have a strong colour cast on it where everything is for example reddy or bluish etc?
I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply.

Mar 01, 2011 | Sony Televison & Video

2 Answers

My E771 monitor colors suddenly shifted with


Possibilities:
1. video-card gone bad;
2. video-cable gone bad;
3. video-cable not tightly-connected to CRT;
4. video-cable not tightly-connected to video-card;
5. "red" gun inside CRT gone bad.

Disconnect the video-cable from the computer, and try again to adjust the "red". If red-free, then it's time to responsibly recycle the CRT.

Reconnect & wiggle the video-cable, to see if that induces any "red" onto the CRT.

Connect the CRT to the VGA-output port on a notebook computer, to see if that video-card generates "red" as one of the primary colours.

Give the CRT a strong "whack" on the side, to see if "red" makes an appearance.

May 07, 2010 | ViewSonic E771 17" CRT Monitor

1 Answer

I have bought a Nikon coopix S600 and recently I have taken a considerable amount of pictures while on holiday.This is the first time that I happened to develop most of them for my album.On computer the...


You said that the pictures on your computer looks perfect. It just that when you print them out, the color came too strong. Well i think it is with the printer and its color separation that has the problem and not the camera. When you see those pics from the camera, do they show the strong colors? If not, and they appear with excellent colors, then there is no problem.

Sep 04, 2009 | Nikon Coolpix S600 Digital Camera

1 Answer

I'm using a SAMSUNG monitor; T240HD T260HD; Dynamic Contrast for my PC. After installing the Monitor drive, i adjusted its colors. But whenever i open the photoshop i got a massage saying: " The monitor...


ok the disk that came with the monitor when you load it comes up with the language screen once you click english it shows the users guide on the bottom of that screen you have to scroll down there are three more options there install driver then natural color the one you want and magic tune click on the natural color to install it on your pc and that should fix the problem with paintshop hope this helps regards Jim please feel free to reply if this dosen't work

Apr 24, 2009 | Televison & Video

1 Answer

Colour problem


I have default settings I normally use for most sets before I begin any kind of alingment. Contrast: 90% Brightness: 45% Color: 45% Tint: 50% If the brightness is to high or the contrast to low the color is off. Check your connections, there probably OK, but, it never hurts. If the settings don't help call a local authorized servicer in your area. Hope this helps.

Jun 23, 2007 | LG 42PX3DCV 42 in. Plasma EDTV

1 Answer

RCA F31317 lost blue in picture.


this symptom is characterised by the loss of one or two primary colours. this symptom can be classified into three cases: 1) loss of red colour, 2) loss of colour blue,3) loss of green color. this symptom may be caused by a trouble in the colour demodulator, in the color amplifier or in the colour subtraction amplifier circuit. in your case loss of blue colour. this is a very complicated problem that you need some special test equipment like oscilloscope and color pattern generator in order to trace the signal. tune the receiver to a color broadcast station(a colour bar generator can be used to transmit a colour signal to the set). check the Z-axis demodulator, z-axis amplifier and the B-Y output circuit for the chroma signal. observe the signal process with an oscilloscope. if the color signal is not present use a VOM to locate the defective component in any of the above circuits. check the transistors and the resistors in the collector circuit. good luck!

Feb 14, 2007 | RCA F31317 31" TV

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...