Question about Motorola Mobility MOTORIZR Z3 Cellular Phone

1 Answer

My phonekeypad stopped working all of sudden what should i solve the issue

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 139 Answers

Hi, Issues like this are related to the flex of the phone .The flex controls the function of the keys on the pad.

The flex of the phone is located inside the phone, it controls the functions of the screen an also the keypads of the phone.

The flex is a thread like object that is located inside the phone. To see the flex, you will need to disassemble the phone to get to the flex of the phone.

After replacing the phone flex, your done.

Also it might be the keypad IC of the phone. But in other to know if it's the keypad IC, you will need to take it to a repair shop to check that out for you.

You can get a replacement flex from any of the phone repair stores around you also.

Hope it helps.

Thanks for using fixya...

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Acme Juicerator suddenly stopped working. I am worried the motor burnt out. What should I do?


Acme 5001 Supreme Juicerator Juice Extractor Stopped ...

www.fixya.com > ... > Acme 5001 Supreme Juicerator Juice Extractor
Acme 5001 Supreme Juicerator Juice Extractor, stopped working related issues. ...My motor just suddenly stopped working. what happens if a screw peg ...

Acme 6001 Juice Extractor Juicer stopped working - Questions

www.fixya.com > Forum > Juicers > Acme > Acme 6001 Juice Extractor
Acme 6001 Juice Extractor, juicer stopped working related issues. Get free help, solutions ... ...juicer just suddenly stopped working. Mine stopped working after ...

Amazon.com: Customer Reviews: Acme 5001 Juicerator ...


Dec 03, 2015 | Sponge & Chamois Just Swipe Chamois Lens...

1 Answer

All blinkers stopped working


replace your flasher it is under the dash drivers side it runs about $15 this should solve your issue

Dec 11, 2013 | 2004 Chrysler Pacifica

1 Answer

Kodak easyshare C183 flash not working


Check settigns or possible burned bulb.

Aug 23, 2012 | Kodak Easyshare C183

1 Answer

Some of my keys have stopped working


Flip the system upside down with the lid open and shake the crumbs out of the keyboard. If this and a can of air doesn't solve the issue, you will need to replace the keyboard.

Jan 04, 2012 | Acer Aspire 5742Z-4200 Notebook

1 Answer

I have dell inspiron 1525 once i attached wofer with my laptop and suddenly affter that my audio device stop working i nstalled windows 7 after that but now high defination audio device is not plugged in...


you will need to re install the drivers for the high deff audi device from dells website that should solve your issue i had the same issue with my toshiba when i upgraded to 7

Apr 19, 2011 | Dell Inspiron 1525 Notebook

2 Answers

Suddenly stops showing the picture


The cause is a sudden overheat but when restarted its fine then it goes again this intermittant issue is with the lamp beleave that or not i found replacing the lamp solved the issue perm.


Thanks and please leave postive feedback..

Nov 17, 2009 | NEC NP60 Projector

1 Answer

My firewire suddenly stopped working!!!


I had the same problem after re-installing windows. The firewire just didnt work on the tascam interface. I managed to solve the problem by upgrading from windows xp to windows vista. I downloaded the vista drivers from the tascam site and everything sprang back into action. Problem solved! Hope this helps.

Jul 08, 2009 | Tascam FW-1804 Sound Card

1 Answer

Hi, I had some issues with my laptop and I have no ideas how to solve that. Actually suddenly the pad and the keyboard stopped working so I was wondering what could be the source of those problem. Please...


1. if there is hardware stack issue first try to turn off your monitor.

2. remove battery

3. leave it for 5 minutes
after that try to check the issue status.

Nov 25, 2008 | Computers & Internet

2 Answers

Vibrator not working


My nokia 3110 clasic ******** suddenly stop working please tell me how i can solve this problem.

Dec 03, 2007 | Nokia 3110 Cellular Phone

Not finding what you are looking for?
Motorola Mobility MOTORIZR Z3 Cellular Phone Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Virgil Wolter

Level 1 Expert

29 Answers

Rami Obeid

Level 1 Expert

16 Answers

D. E. Hev

Level 3 Expert

1179 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...