Question about HP OfficeJet 7410 All-In-One InkJet Printer

1 Answer

My 7410 will not power up. The "HP Advent screen appears to just idle along and the only thing that changes it is to disconnect the power cable.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 731 Answers

Hi,

If the printer powers on and stays Idle with HP logo screen, you try reset the printer as below (try next step one after the other, if it doesn't fix)

Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

Regards
Riztech

Posted on May 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 7410 All-in-One printer stopped in a blue screen with 00000020


0000020 is a BIOS error code for WiFi communication error. (Took me HOURS to find that in 2008!)
1. Power down the printer - disconnect the power supply 20 seconds. Restart it while pressing the ON along with OK both for 3-5 seconds. This will recover a failed BIOS. However, if the WiFi really is dead (and it IS the weakest link in the printer), you may get the error again.
2. Power off the printer (again). Disconnect the WiFi card (back panel, look for a 6-7 wire cable wrapped in plastic tape). If the printer restarts, you have your answer... but not the solution!
3. HP7400-series WiFi cards are rare as hens-teeth these days. Mine failed a 2d time; I use the cat5e connector and just leave the WiFi disconnected.

Mar 12, 2014 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

HP 7410 will not boot. It powers up and the HP logo screen flashe


This was solved really well on this blog. It is some problem with the wifi board. If you disconnect it (no so hard and well explained on the blog) you will have network printing over a cable but no wireless.

http://larrycrazyness.blogspot.com/2009/01/hp-fixed.html

Oct 23, 2009 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

HP 7410 will not boot. It powers up and the HP logo appears on the screen with a progress bar. The display then scrambles and the power light flashes green. No buttons work or do anything.


connect the printer directly to the wall socket for the power supply if it is connected thrugh surge protector.
perform a reset :

unplug the power cable .
press and hold # and 6 key on the printer..
plug in the cable wait for 20 secs then release the buttons..
after this the printer will re-initialize .. this may take few mins..

and chek after that

Oct 19, 2009 | HP OfficeJet 7410 All-In-One InkJet...

2 Answers

Printer wont power up


I found over 50 people online that had the same problem which appears to be a fatal software problem. One person had a partial fix which invoolved unpluging the cable to the wireless card and leaving it unpluged and using cable to connect printer to the network.

Apr 06, 2009 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

No signal on advent monitor


Hi
First thing, change the cable and use a digital cable, Power everything off, disconnect the power from the moniter and the pc, leave it for 2-5min and then connect them back again.

Let me know what happens

Mar 23, 2009 | Advent 4211c Notebook

Not finding what you are looking for?
HP OfficeJet 7410 All-In-One InkJet Printer Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...