Question about Tasco 750 Monocular Microscope
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: manual for a microscope
Try Ebay--may have to buy the micro aswell but it won't cost much,have you tried the Tasco website in case a free d'load is avail?-kind regards martin r
Posted on Mar 27, 2009
You will need to focus in on the slide. There should be 2 1" diameter knobs on either side of the stand, and just to the rear. Those knobs control the height of the stage (where you slide sits). Slowly raise or lower while looking into the eyepiece. At some point something should be see, if the microscope is working properly.
Sometimes it is easiest to start with the lowest magnification. On the outside of the objective (little lenses hanging down that can be rotated) there should be some numbers written on them (usually 4, 10, 40). Those numbers reference your magnification. If you multiply that number by the eyepiece (10) magnification, you will get your total magnification, so start out with your 4x. It will give you the largest field of view, so it is great for finding whatever it is that you are looking for on your slide. It is also the easiest one to get focused. The higher you go in magnification, the smaller the field of view, thereby the more difficult it is focus in on your sample.
Posted on Jan 01, 2011
Tips for a great answer:
Feb 24, 2016 | Science & Laboratory
Aug 02, 2014 | Tasco 750 Monocular Microscope
Apr 01, 2017 | Bushnell Cameras
Dec 19, 2010 | Tasco 750 Monocular Microscope
Mar 01, 2010 | Bausch and Lomb Optics
Jul 29, 2009 | Bausch and Lomb Discoverer 78-1600...
Jun 16, 2007 | Tasco 750 Monocular Microscope
302 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: