Question about Linksys Wireless-G WRT54G Router

1 Answer

Linksys WRT54G router

Power light and red diag light are steady, other light use to blink but NO more. Can't connect to internet. Is router fried?
Thanks.

Posted by on

  • jcard831 Aug 15, 2008

    Thanks, now I know I need to replace the router.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 6,487 Answers

Yes there's a possibility that the router is dead already because that diag light will only be lit up when there's a hardware failure on it, you can try press resetting the router by holding the reset button for 30 seconds then power it off then power back on hopefully the diag light will be off, if still on you need to replace the router already...

Hope that helps.........

Posted on Aug 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Came home and linksys only shows blinking red light.e3000.is it fried router


Which light is Red blinking, you should unplug the router, and wait about 2 min, then plug back, if you still see the blinking red light, it may be a bad Router if it is the power light,.

Mar 25, 2013 | Linksys E3000-CA Dual Band 802.11N...

1 Answer

Linksys orange reserve light preventing me from connecting to internet


Does it say diag on the orange LED. if it does, that means there is a problem with the actual hardware. try pressing the reset button on the router for 20 sec, unplug the power of the router for a minute, plug it back in and wait for the power light to stay steady for 1-2 minutes.

Jan 14, 2010 | Linksys (NR041) Router

1 Answer

My internet light is blinking rapidly and


Your internet light will blink. It will blink at least 20 megs per day, without any use. That is normal, it is doing more it measn someone is using your wireless connection.

Nov 23, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Router not working and only the power light is on and the red diag light


Try umpluging the router for fifteen minutes. If that doesn't hit the reset button on the back, and reconfigure the router. If that doesn't do it sounds like your router might got toasted by a surge.

Nov 14, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

My wlan light keep going on and off on my wrt54g


Also check if the power light on your router is blinking. If it is blinking, that's an indication of hardware failure. To revive it, do a hard reset. Press and hold the power button of the router for 30 seconds then unplug the power. Wait for 30 seconds again before you plug it back in.

Oct 27, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

The Linksys WRT54G ver.6 worked until yesterday when I lost access to the internet. The "power" light is blinking continuously, so I went through the troubleshooting exercise of power off, power on - no...


Blinking power light usually indicates device being faulty. Was there a power surge? Try resetting the router by pushing the small reset button at the back with a pin for 10 seconds, then power it off and on. See what happens

Jul 05, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Power and Diag lights blink.


When the diag and power light always blink it only means one thing there's a problem with the router, Try tor eset it by pressing the reset button for 30 seconds then after that tunr off the power for 5 seconds then trun it back on, of the diag and power light are still blinking the router is already bad and needs a replacemenet, If the router is still under warranty have it replace to Linksys this is the number 800-3267114.

Hope that helps.........

Aug 29, 2008 | Linksys Wireless-G WRT54G Router

3 Answers

Diag led


wat about the powerlight in the router....

Oct 24, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...