Question about Projection Televisions

1 Answer

I keep getting different colours on my screen red, yellow, pink and blue i pressed the self focus button so many times it does'nt seem to help it clears it while the self focus button is on and then it goes back to blury i keep getting double image

Posted by on

  • dellavu Aug 15, 2008

    i tried that it didnt help much but i see what you mean thats what i thought from the start. i think i must have checked the wires and self focust so many times i just dont know what to do anymore

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

This is Because of the wire is not connected properly chaeck the wires >> unplug and replug them if there are any screws please tighten them

or replace the cord

Posted on Aug 15, 2008

  • Sean  O'berion
    Sean O'berion Aug 16, 2008

    Dellavu! now try to get the wires replaced this is usually because of Wire's have gone Bad or the Port on the projection TV

    there are scenarios one in a million where the screen has a problem but I hope that is not a situation with you :)

    Regards
    MyTechGuru

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I stumbled across a tutorial on fixing the convergence for my Sony KP-46WT510 a while ago, and now I can't find it again! Does anyone know where I can find that tutorial or one similar to it? We've been...


Here is a walk through on how to set your convergence.

A quick and easy way to try and let the TV realign the convergence try this...

1) Turn on the TV and tune to a channel and let it warm up for about a half an hour to let everything settle into its normal operating mode.

2) Press the Flash Focus button on the original TV remote. A cross pattern will show on the screen and the process is complete when the cross turns white and the TV returns to the program you were watching.

3) Do not press any other buttons until this process has completed.

If this does not adjust it enough you can adjust the convergence manually as follows:

1) Press the menu button on the original TV remote.

2) Use the arrow keys on the remote to highlight setup and press + button to select.

3) Use arrow keys to select convergence and press + button to select.

4) A pattern of white crosses appears, with a yellow [ ] around one of the
crosses. Aligned crosses (which do not need adjustment) look white and
have little or no red or blue showing. Crosses that are not aligned show
red or blue shades beyond their edges.

5) Use the arrow keys to move the [ ] to a cross that is not aligned. ***Note: start with crosses in the middle and work outward ****
*** TIP: Set the alignment while about 5 feet from TV for better results ****

6) Press the + button to select the cross and the [ ] will turn red indicating it is ready to adjust the Red convergence.

7) Use the arrow keys to move the red cross on top of the white one or at least as close as you can get it.

8) Once the Red is aligned press the + key again and the [ ] will turn blue. This indicates it is now ready to adjust the blue convergence.

9) Use the arrow keys to move the blue cross on top of the white one or at least as close as you can get it.

10) Once you have aligned the blue cross press the + button again and the [ ] should turn yellow.

11) Repeat steps 5 through 10 until all the crosses are aligned. To exit back to regular programming press the menu button on the remote.


Jan 08, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Samsung hdtv1080i saying check factory data self focus nt wkg


Hope this link helps mate,

http://www.howtomendit.com/answers.php?id=79076

Darren

Dec 31, 2008 | Samsung HCN436W 43" Rear Projection...

1 Answer

57H81 Red Bleeds, Dull Color, Was Pink


change the l.c.d colour corretion board new £ 400 not worth doing in my opinion part hard to get i stopped reparing these 5 years ago . agro agro agro ebay part not good these sets have a horrible short life

Dec 08, 2008 | Toshiba 57H81 57" Rear Projection...

1 Answer

Convergence perfect focus not working and double vision


The problem you have is the 2 STK - 392 convergence integrated circuits need replacing the cost in the UK is about £150.
SUPER8

Nov 26, 2008 | Projection Televisions

2 Answers

Pink colour everywhere


Assuming all power supplies are OK, you most likely have a bad CRT grid, and that respective (red) tube must be replaced. I'm sorry that it went that way, as this repair is not cheap....accordianman

Sep 12, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

I keep getting the different colours on the screen red, pink yellow and blue i tried self focus it does'nt seem to work and its very blairy


Good Day, dellavu;

It sound like you have a convergence problem and own a Hitachi TV. If you are not a electronic tech, I would suggest that you call an Authorized Service Center and them come out and give an estimate...... The price can vary depending on where you live. The cost could vary from $350.00 to $600.00.
Be careful and good luck, big IRISH.

Aug 15, 2008 | Projection Televisions

1 Answer

Colour issues


Sounds like your red gun may be shorted, Try adjusting the red gun down a little see it that helps.You can also switch the blur CRT socket for the red if your screen is still mostly pink then you know for sure its your red tube that needs replacement. If its mostly blue then you have a problem in the red drive circuit.

Jan 14, 2008 | Projection Televisions

2 Answers

Samsung rear projection


If the shadow is only red, you can check your convergence and see if aligned first and then, check to see if in red bias my need to be turned down a bit.

Dec 13, 2007 | Zenith D61W25 61" Rear Projection...

1 Answer

Blue/Yellow out of focus on Hitachi 43UWX10B


You will need the convergence circuit repaired......IC's replaced,
B+ resistors checked and then magic focus activated......T.

Sep 17, 2007 | Philips 60P8342 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...