Question about Computers & Internet

1 Answer

I cannot enable my headphone from back panel :( i have disabled front panel frm lenovo HD audio manager. My speakers connected in back panel is working fine, also my mic is working but i cannot use my headphone. When i connect device it shows device is connected but i cannot hear anything.....pls pls pls do help me.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

All you need to do is refresh the driver.

You can do this by going to the device manager.

You can click START then go to CONTROL PANEL then go to HARDWARE AND SOUND and look for DEVICE MANAGER.

Look for "Sound, video game controllers" from the list. Double-click or click the expand button on the far left. You should see the name of your device. i.e. Realtek HD Audio.

You need to right-click on the device. There should be a menu that would come up. Choose UNINSTALL. Just click the OK button on the next pop-up. Just make sure you DON'T select the "delete the driver software" option.

**If you have two Audio devices then you can uninstall the other one too. Because your computer will re-install it automatically and reset the settings to default with it. There this procedure fixes a lot of driver settings/configuration issues.

Close all the pages and RESTART the computer.

You should see on the bottom right of your screen when it gets to your background that the driver is installing. When it says "Driver re-installed successfully!" then you can test the front headphone jacks.

Please feel free to give you comments, questions and please do rate this solution.

Thanks,

Posted on May 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headphone jack is broken INSIDE the port and is overriding the speakers. Can I override this override?


Or instead of having to open up your computer and messing with the mobo. Just use the control panel in to disable the headphone jack.

May 09, 2014 | Dell OPTIPLEX 745 PC Desktop

2 Answers

Sound speakers


Surround Sound speakers? Internal or External? Where are you plugging the headphones in?

May 30, 2013 | Lenovo G570-4334 -24828

1 Answer

Pc headphone volume driver


3 Ports on the side- Pink,Green,Black
Pink Port is LineIn for an external device player jack


Green Port is LineIn for the Microphone jack
Black Port is LineOut for Headset or External Speakers jack


Plug the Green jack on Headphone - into the Black Port on the laptop.
b) Go to Control Panel and open - RealTek HD Audio manager
On the top of Page are 3 Icons -


One Icon is labelled Speakers One is for Digital optics, one is for Mic,
The Speakers Icon is misleading as it is also for Headphones (LineOut)


Select Speaker Icon and make it Default. Also tick Full Range - Front LR
Ignore the 4 vertical Analog Icons on the right side.


You should now have Headphone sound if your volume is not Muted.

Click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select enable windows 7


Click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select configure speech recognition then you will see earphones with a speaker among a list set up a microphone headset with microphone then next and next again you should see your earphones with microphone being configured Click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it or you might have to depending on your operating system
Click start Control Pannel
Click on Hardware and Sound


Click on Sound
then you devices should come up ; speakers, Digital Audio, and headphones


plug your headphones in
then select headphones


at the bottom it will say set as default
select that!!


then when you disconnect your headphones it automatically switches to the speakers and when you plug them back in it automatically will switch to headphones

Feb 18, 2013 | HP/Compaq P4 System - WinXP Pro/Office...

1 Answer

Can't get the headphone sound working from the laptop


The Laptop has 3 Ports on the side- Pink,Green,Black
Pink Port is LineIn for an external device player jack



Green Port is LineIn for the Microphone jack
Black Port is LineOut for Headset or External Speakers jack



Plug the Green jack on Headphone - into the Black Port on the laptop.
b) Go to Control Panel and open - RealTek HD Audio manager
On the top of Page are 3 Icons -



One Icon is labelled Speakers One is for Digital optics, one is for Mic,
The Speakers Icon is misleading as it is also for Headphones (LineOut)



Select Speaker Icon and make it Default. Also tick Full Range - Front LR
Ignore the 4 vertical Analog Icons on the right side.



You should now have Headphone sound if your volume is not Muted.



click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select enable windows 7



click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select configure speech recognition then


you will see earphones with a speaker among a list set up a microphone headset with microphone then next and next again you should see your earphones with microphone being configured



click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list


make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or

select the voice tab


make sure that you have the right media selected also

select volume make sure the box for microphone has a tick in it


or you might have to depending on your operating system
Click start Control Pannel
click on Hardware and Sound



click on Sound
then you devices should come up ; speakers, Digital Audio, and headphones



plug your headphones in
then select headphones



at the bottom it will say set as default
select that!!



then when you disconnect your headphones it automatically switches to the speakers and when you plug them back in it automatically will switch to headphones


Hope this helps.

Dec 01, 2012 | Samsung Silver 13.3" Ultrabook...

1 Answer

I want to attatch my mic to my motherboard


desktop or laptop computer ?

3 Ports on the side- Pink,Green,Black
Pink Port is LineIn for an external device player jack



Green Port is LineIn for the Microphone jack
Black Port is LineOut for Headset or External Speakers jack



Plug the Green jack on Headphone - into the Black Port on the laptop.
b) Go to Control Panel and open - RealTek HD Audio manager
On the top of Page are 3 Icons -



One Icon is labelled Speakers One is for Digital optics, one is for Mic,
The Speakers Icon is misleading as it is also for Headphones (LineOut)



Select Speaker Icon and make it Default. Also tick Full Range - Front LR
Ignore the 4 vertical Analog Icons on the right side.



You should now have Headphone sound if your volume is not Muted.



click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select enable windows 7



click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select configure speech recognition then


you will see earphones with a speaker among a list set up a microphone headset with microphone then next and next again you should see your earphones with microphone being configured



click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list


make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or

select the voice tab


make sure that you have the right media selected also

select volume make sure the box for microphone has a tick in it


or you might have to depending on your operating system
Click start Control Pannel
click on Hardware and Sound



click on Sound
then you devices should come up ; speakers, Digital Audio, and headphones



plug your headphones in
then select headphones



at the bottom it will say set as default
select that!!



then when you disconnect your headphones it automatically switches to the speakers and when you plug them back in it automatically will switch to headphones

hope this helps

Sep 19, 2012 | Biostar P4M900M7FE Motherboard - VIA...

1 Answer

Headphones for a laptop not working


The Laptop has 3 Ports on the side- Pink,Green,Black
Pink Port is LineIn for an external device player jack


Green Port is LineIn for the Microphone jack
Black Port is LineOut for Headset or External Speakers jack


Plug the Green jack on Headphone - into the Black Port on the laptop.
b) Go to Control Panel and open - RealTek HD Audio manager
On the top of Page are 3 Icons -


One Icon is labelled Speakers One is for Digital optics, one is for Mic,
The Speakers Icon is misleading as it is also for Headphones (LineOut)


Select Speaker Icon and make it Default. Also tick Full Range - Front LR
Ignore the 4 vertical Analog Icons on the right side.


You should now have Headphone sound if your volume is not Muted.


click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select enable windows 7


click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select configure speech recognition then

you will see earphones with a speaker among a list set up a microphone headset with microphone then next and next again you should see your earphones with microphone being configured


click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list

make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or
select the voice tab

make sure that you have the right media selected also
select volume make sure the box for microphone has a tick in it

or you might have to depending on your operating system
Click start Control Pannel
click on Hardware and Sound


click on Sound
then you devices should come up ; speakers, Digital Audio, and headphones


plug your headphones in
then select headphones


at the bottom it will say set as default
select that!!


then when you disconnect your headphones it automatically switches to the speakers and when you plug them back in it automatically will switch to headphones

hope this helps

Sep 02, 2012 | Lenovo B575-1450A5U - IdeaPad Laptop / AMD...

1 Answer

I am not getting any sound from desktop speakers..i have sony driver installed


Onboard audio is disabled in the BIOS
The BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Go to the Advanced > Peripheral Configuration menu to make sure onboard audio is enabled.
Audio settings in the sound mixer are incorrect
Check your audio mixer software to ensure audio is not muted or the volume level is not turned too low.
The speakers or headphones may be connected to the wrong jacks
Make sure you connect all speakers to the correct jacks. If you connect them to line-in or microphone jacks, they won't work.
Audio drivers are not properly installed
Check Device Manager under the Sound, video and game controllers section for any errors associated with the audio driver. Reinstall the audio driver if necessary.
Audio to back panel is muted if front panel is connected
Check your audio mixer software for a setting that mutes back panel audio if you have plugged headphones into a front panel audio solution. Uncheck this setting to allow audio to both the back and front.
Sound Playback is set to wrong device
In Control Panel > Sounds and Audio Devices, go to the Audio tab. Check the default device for sound playback; there may be multiple selections. Select the desired device, either rear panel or front panel.

Mar 06, 2010 | Office Equipment & Supplies

1 Answer

I have a syncmater 2333 HD and after connecting to my pc, i seemed to have lost all sound. when connecting speakers and earphones, there is still no sound. thanks


Did you plug in the audio cable to the back of the computer? If so, this may have disabled the front audio connections (or vise-versa). Try unplugging the audio cable from the computer (that is connected to the monitor) and see if your headphones work. If so, there is the solution to that problem.

Check the audio connection on the back of the monitor and double check that it is plugged into the correct port on the back of the computer. If the monitor has amplified speakers, it would be a good idea to connect to the 'line-out' connector on your computer. This would avoid disabling your front audio panel.

Lastly, check the volume on your monitor's built in speakers. This monitor can double as an LCD television, so it most likely has a separate volume control (that defaults to 0).

Oct 04, 2009 | Samsung SyncMaster 2233BW 22" LCD Monitor

1 Answer

Can't hear audio


I found many references to this issue but I am not sure which may apply to your problem. Here is a set of steps to follow from another site: (Assumes Vista and Realtek)

  • Open Vista’s Control Panel (Window | Control Panel)
  • Open the Realtek Audio Manager (not “Sound”)
  • In the navigation bar in the far right, there is a little yellow folder icon. It is just below “Device advanced settings” and above “ANALOG”. Click the folder icon.
  • Click “Disable front panel jack detection” so that a yellow check mark shows up. Hit “OK”, and close the Realtek HD Audio Manager. That should re-enable the sound

Mar 30, 2009 | Microsoft Windows? Vista Home Premium...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...