Question about Eagle Cuda 300 Sonar Fish Finder ()

1 Answer

Will not show fish on shreen - Eagle Cuda 300 Sonar Fish Finder ()

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 5,370 Answers

If you do not get good fish arches on your display, it could be because the transducer is not parallel with the ground when the boat is at rest in the water or at slow trolling speeds. ----- Periodically wash the transducer's face with soap and water to remove any oil film. Oil and dirt on the face will reduce the sensitivity or may even prevent operation. ---------- If that is not helping then try reset. Reset Options :--- This command is used to reset all features, options and settings to their original factory defaults. To Reset Options: 1. Turn the unit off. Press and hold down arrow and the MENU DOWN key at the same time while pressing the PWR key. 2. Release the keys as the unit powers up. The unit will turn on with factory settings restored. -------------- Click this link below to get more help. ------------------ This should help.Thanks.Helpmech.

Posted on May 21, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i get the fish on the screen to look like fish

Your unit should have a setting labeled "FISH ID" turn this setting on and you will see fish shaped icons instead of arches on your screen. You may also see numbers by these icons. Those numbers represent the depth of the fish at that moment.
Be forewarned that at times your unit will show the fish icons when there aren't actually any fish below the boat. Hope this helps.

Sep 16, 2014 | Boating

1 Answer

HDs 8--detecting bait fish?

its hard to describe a school of bait fish on the screen less you know what your looking at you need to go on line to www.lowrance and go to there what bait fish looks like on your screen page it will show you all you need to know and how to set your unit to know what your looking at and how to read your screen on your unit

Feb 06, 2013 | Lowrance HDS-8

1 Answer

Try to take it back to factory setting now have a blue shreen

If you can't get to your desktop you can either reload the OS or you can restart the computer hitting f8 it will bring up some options - you can either use "safe mode" or you can go to "last good configuration that worked". One last resort is to insert the OS disc restart the computer hitting f2 and change the BIOS to read the CD drive and load the OS that way too

Jan 13, 2013 | ASUS Computers & Internet

1 Answer

Need to know how to distinguish between big fish and small fish on myfcv1100l

Only experience will help you, try to turn down gain and up frequency to see differences.
A big fish shows up big!

Jan 03, 2013 | Furuno Fcv 1100 10.4" Color Fish Finder

1 Answer

Screen shows images on fish instead of arches

Most sonars have a setting for FISH ID, on or off.. Not sure on the type of unit you have, so hope that helps. I've seen where hummingbird fishing buddy only have fish images and not arches...

Mar 02, 2010 | Boating

1 Answer

Haft to use FN-F6 to turn on my shreen, but it gous black again?

same problem here. any solutions? external monitor works, so the graphicscard is not the proble, i guess.

Feb 16, 2010 | Acer Aspire 8920-6048 Notebook

1 Answer

Screen shows bottom fine but doesnt show any fish i have changed every setting but nothing works

Fish on the bottom show as a blur, similar to weed, and pelagics show the same, but because of there position they are easy to recognise. Large singe fish like schnapper and sharks tend to show as an upside down V. You will have to use it often and you will eventually, by experience be able to tell whether you are looking at fish or weed.

Feb 07, 2010 | Humminbird Xt 6 20 Transom Mount Dual Beam...

1 Answer

The shreen does not respond

Check out with the service centre ... better than fixing it urself ...

Jan 03, 2010 | Samsung Highlight Cell Phone

1 Answer

Toshiba 46HM95 46 tv

If the line is all that is showing with black on the top and bottom. This indicates a loss of vertical deflection which is caused by the loss of the veritcal sweepignal. Check the output of the vertical section of the TV set. You will need an oscilloscope, and multimeter along with a schematic.

Oct 01, 2007 | Toshiba 46HM95 46" HDTV

Not finding what you are looking for?
Eagle Cuda 300 Sonar Fish Finder () Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Boating Experts


Level 3 Expert

696 Answers

ray gallant

Level 3 Expert

51191 Answers

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Are you an Eagle Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides