Question about AEG Washing Machines

Open Question

Hi we have an aeg lavamat turbo L12710 then en error code E40 flashes, so checking with manual it says door problem, switch off but after 30 mins door wont open, so was able to open it and check the interlock, when finally power up the machine error code is gone but the timer starts flashing and water entering is continously being discharged.. already cleaned the filter/pump still same situation.

Posted by on

  • lan_alcera May 21, 2011

    tried unplugging the connectors to the door interlock switch then attaching it again then tried to power on the machine but no lights on the panel but as i turned on the selector knob the machine starts up but i can see the timer set to 139 flashing then the start/pause intermittently blinks green then off,, then the pump continous to function all the water coming in is continously beng discharged/draines out.. what could be the

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: AEG LAVAMAT 74620 - Washing Machine CE error code

read this site: http://www.askanowner.nl/qa/view.asp?s=2&qid=152459&arrqueryparts=&arrquery=code%3Bce kind regards, w vd vegt

Posted on Aug 28, 2007

rizla
  • 1463 Answers

SOURCE: AEG Lavamat 1000

hi

dont know if this is the one you need AEG 1000 Washing Machine
you may need to scrool down to download the manual .


riz.

Posted on Mar 03, 2008

EngineerGR
  • 119 Answers

SOURCE: need the manual for Aeg oko lavamat 74630

Dear Biyo,

Please download the manual from here. (simply press left click)

http://www.manualshark.org/manualshark/files/5/pdf_10516.pdf

I have sent you an email as well.

Regards,
EngineerGR

Posted on Apr 09, 2008

  • 1 Answer

SOURCE: AEG LAVAMAT 74620 - Washing Machine CE error code

Replace Water distributor (Dispenser Drawer) then will be Ok

Rafiq

Posted on Dec 01, 2008

  • 44 Answers

SOURCE: AEG Lavamat Turbo 12830 - error code E20

Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On an aeg lavamat washer dryer l12710 where is the filter for the dryer I have cleaned the front one for the washer ?/


If you go to www.aeg.co.uk and look under "service and support" you will see a box to insert your model number. I've put your model in and there's service manuals in several languages. Happy hunting.

Nov 03, 2014 | AEG Lavamat 12710 Front Load Washer /...

1 Answer

AEG Lavamat washing machine model 76850, shows a blinking key and makes clicks and after that shows E40. Thanks John


Family error code E40 is visible to customers and (could be E41,E42,E43,E44 and E45 only visible in service mode) means problem with open door or door interlock.
I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing
programme):
Press and hold down START/PAUSE and any of the option buttons for at least two seconds: the LEDs initially switch off, and then display the flashing sequence corresponding to the alarm.
The alarm sequence continues as long as the two buttons are held down.
E41 - Door open
E42 - Problems of door closure
E43 - Interlock power supply triac faulty
E44 - Door interlock sensing circuit faulty
E45 - Door interlock sensing circuit triac faulty

Possible causes:
Door interlock faulty, wiring faulty or PCB faulty.

24899241-2jugp0yd2m13ocssblsa4goy-3-0.png
Dado

Aug 02, 2014 | AEG Washing Machines

1 Answer

WHAT IS ERROR E40 MEAN?


Its a defective door lock. It might have to be replaced by a techie! Hope its under warranty

Mar 08, 2014 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

Turned off mid cycle. Tried putting back onfor drain, also rinse and restart. Each time get error E40.


Hi.

With AEG washers E40 means defective door lock. Since a faulty door lock switch may go out with vibration you often do not get the error all the time. The door lock switch must be tested and eventually replaced. Call the AEG number listed in the user manual if you want to get in touch with an authorized technician or if you need replacement parts for your washing machine.

Regards.

Ginko

Sep 18, 2011 | AEG Washing Machines

3 Answers

AEG washing machine error code e40


E40 relates to the door being left open when the programme is started, it maybe that the latch was not pushed over when the door was shut.After the door is closed again the fault should go away. If it does not and you hear alot of clicking from the door lock you may just have a door lock at fault.Code E40 is door not closed, could be a mis-aligned door or faulty door switch.-------------But if door is closing properly and you are confirmed that door is getting properly locked, then other possibility can be gunked filter or blocked drain pump.It requires cleaning internally.The procedure is as follows:--- Towards the bottom right of the machine is a pull-down flap.
Drain the machine - there's a tube at the bottom of the machine
with a plastic plug - you'll see a butterfly handle, pull hard; the plug
is a round ball on the end of a stick.
Unscrew the large diameter thing (pump cover) -
Don't do this before the drain step!!!
Withdraw the filter cylinder and remove any gunge - the
filter port has two ports - the left one is the impellor
pump and the right one is the discharge pipe; feel to ensure
these are not gunged up either.
Reassemble in reverse order - as Haynes say.
Almost every programme necessitates a pump activation to
assure that the machine is empty of water .-----------

Apr 09, 2011 | AEG Lavamat 74640 Front Load Washer

1 Answer

Aeg lavamat error 40e


E40 indicates the doors not closed properly. Sometimes it can be the lock itself or the main control board.

Feb 04, 2011 | AEG Lavamat 72640 Front Load Washer

1 Answer

AEG Lavamat Turbo 12830 - error code E20


Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Mar 21, 2009 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

Aeg 74640 error code e30


What does the E40 error code mean?

Jul 09, 2008 | AEG Lavamat 74640 Front Load Washer

1 Answer

Error message


e40 fault code is water level too low during heat which is very strange to appear at start-up. does anything else happen? without being certain, points to a main module fault

Dec 23, 2006 | AEG Lavamat 16810 Front Load Washer/Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...