- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try the following codes: Toshiba 0060, 0154, 0156, 1265 . Turn on the TV manually and then press the TV button on the remote. Press and hold Set until the LED blinks twice; then release the button. Enter the four digit code. The LED should blink twice again. Test if the TV turns off by pressing Power once. If it does, check if the other features of the remote control the TV. If it doesn't, try a different code. You can also manually search for a code by pressing 9-9-1 after holding and releasing Set. Then alternate between pressing Power and TV (for a TV code). Lock in the code when the TV turns off by pressing Set. Check if the remote works for other features.
Here is an upto date list from sentry who manufacture your remote:
RMC10 Code List
This is a PDF file and should open automatically.
For the Toshiba TV code list you will need page 8.
But if none of the codes work, there are instructions on how to get the remote to search for a code on pages 1 and 2.
Have you tried these codes?
Code 1000 for Toshiba TV
Code 1048 for Toshiba TV
Code 1072 for Toshiba TV
Code 1105 for Toshiba TV
Code 1109 for Toshiba TV
Code 1118 for Toshiba TV
Code 1160 for Toshiba TV
Code 1190 for Toshiba TV
Code 1241 for Toshiba TV
RE: Programming a Kidz Remote by Kissel
By helpmedave (Guest Post)
the procedure to program the remote is as follows. Find the setup button recessed between tv and cable buttons. Use a toothpick to press the setup button until the led blinks once, keep holding it until it blinks twice then release. press tv or cable button then enter the 3 digit code for the device you want to try. the light will blink twice if the code is valid. ( yeah i know you don't have the codes ) (me neither ) if you successsfully program it to control a device, you can then program each button as follows. hold setup button until light blinks twice.press tv or cable as needed. press 995 the led will blink twice . press the button to program. enter channel number you want (may have to enter 2 or 3 digits 08 008 etc)press setup light will blink once.m select another button and repeat to program all buttons you wish to program.to lock in settings, press setup until led blinks twice. good luck.Posted on 08/09/2007