Question about Kenwood KVT-817DVD DVD/CD/MP3/WMA 7" Motorized In-dash Monitor With 5.1ch DSP Car Video Player

1 Answer

I have a kenwood vvt-719, trying to hok my ipod and my ipod touch and it says disconnected

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 794 Answers

Hi darnell224,

The USB device/iPod is selected as a source although no USB device/iPod is connected. What you can do if you're getting the "disconnected message" when iPod is connected is: Change the source to any source other than USB/iPod. Connect a USB device/iPod, and change the source to USB/iPod again.

The iPods can be controlled by your unit are:

iPod nano with software version 1.2, iPod nano 2nd gen with 1.1.1 software and iPod with video software 1.2. You must update your iPod software if its version is less than the mentioned versions.

Hope this helps.

Thank you for using FixYa.

Posted on May 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenwood DNX7360BT audio in my car with a usb port i cant play any thing on that coz it keeps telling me ''reading'' without verifying data on flash drive


Try to touch the disconnect then reconnect. That seems to solve my endless reading problem with iPod for sure. I think I might have had problem with USB as well and resolved the same way.

Jul 08, 2010 | Kenwood Car Audio & Video

1 Answer

Want to bridge my subs I have a kenwood kac-719


from what i have read about your amp, it is already a mono amp, and rated for 2 ohm's, so all you have to do is wire the subs in parallel (both positives together to positive and both negatives together to negative) or series/parallel if you have dual voice coils (both positive and both negative paired on each sub, then positive from amp to positive on one sub; negative on that sub to positive on next sub; then negative on sub to negative on amp) Note though, with two dual voice coil subs, you can have a 1 ohm load with the first set up, which can damage your amp. Let me know if this helps :)

Jun 11, 2009 | Kenwood KAC-719 Car Audio Amplifier

1 Answer

I have a kenwood 719 flip out monitor and i put a cd in it and the monitor says mecha error and won't let the cd come out. It just makes a bunch of noises. I pressed the reset button but that didn't work....


You can try to push the CD in further with an object and then try ejecting (be careful not to break the CD!). Also, the soft reset button on the outside of the unit may not work, but disconnecting constant power (hard reset) may cause the CD to automatically be ejected when powered back up again. This can be done by disconnecting the negative battery terminal on the car for 15 seconds. If these don't work, visit a local Kenwood stereo dealer for service as this is a common issue with the 719 series and 819 series.

Aug 10, 2008 | Kenwood Car Audio & Video

1 Answer

I have a cd stuck in my kenwood kvt 719 head unit and the touch screen controls for the dvd are not appearing.


Have you tried hitting the "Reset" button on the head unit?

The procedure is on page 7 of the owner's manual under the heading "How to reset your unit"

Here's the URL for the Owner's Manual:
http://inform3.kenwoodusa.com/manuals/KVT-719DVD.pdf

Per the owner's manual, you're supposed to call Kenwood technical support if the display doesn't correctly reset or come back on and/or if the disc won't eject.

Apr 14, 2008 | Car Audio & Video

1 Answer

I lose the code enter of my kenwood kdc-719


I found this on a forum and some people got it to work, If you do not have the remote I do not know any more about what to do for you.

During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code

Nov 08, 2007 | Kenwood KDC-719 CD Player

1 Answer

Kenwood dpx 4020


The iPod will stop itself from charging when the battery is full, and will not overcharge. I'm pretty sure you can't disconnect the power to the iPod (would stop it from charging) and still use the Audio to your stereo.

Aug 19, 2007 | Kenwood DPX-4020 CD / Cassette Player

Not finding what you are looking for?
Kenwood KVT-817DVD DVD/CD/MP3/WMA 7" Motorized In-dash Monitor With 5.1ch DSP Car Video Player Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...