My dgcam was not charging,it was kodak easy share dgcam.

ebay.

It is not possible to email directly from the camera.

If you're experiencing emailing difficulties directly from the Easy Share Software:

Please do a Clean Install on the software:
Please follow the instructions:

1. Uninstall Easy Share software:
2. Select Start > Settings > Control Panel > Add / Remove Programs.
   For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
3. Select Kodak Easy Share software.
4. Select Remove (or select Change, and then select Remove).
5. Run the Clear utility:
6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
7. Click the Download button, and then follow the on-screen prompts.
8. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Hi,

you're not completely right. Kodak printer docks normally only charge the Kodak KAA2HR battery pack. It not charges normal Ni-MH rechargeable batteries of any brands.

Please follow the instructions:

1. Uninstall Easy Share software:
2. Select Start > Settings > Control Panel > Add / Remove Programs.
   For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
3. Select Kodak Easy Share software.
4. Select Remove (or select Change, and then select Remove).
5. Run the Clear utility:
6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
7. Click the Download button, and then follow the on-screen prompts.
8. After restarting your computer, visit the Kodak Easy Share software Web page at http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=15222/15223&product=EKN036302 and install the latest version of Easy Share software.

You need to upgrade your version to be compatible with Windows Vista: Please do a Clean Install on the software:
Please follow the instructions:

1. Uninstall Easy Share software:
2. Select Start > Settings > Control Panel > Add / Remove Programs.
   For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
3. Select Kodak Easy Share software.
4. Select Remove (or select Change, and then select Remove).
5. Run the Clear utility:
6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
7. Click the Download button, and then follow the on-screen prompts.
8. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

If this fault message is on your computer starting Easy Share Software: Please do a Clean Install on the software:
Please follow the instructions:

1. Uninstall Easy Share software:
1. Select Start > Settings > Control Panel > Add / Remove Programs.
   For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
2. Select Kodak Easy Share software.
3. Select Remove (or select Change, and then select Remove).
2. Run the Clear utility:
1. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
2. Click the Download button, and then follow the on-screen prompts.
3. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Try dif. batt.

Advantics are repaired and supported by: Johnsons Photopia

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

VERY COMMON WITH EASY SHARE. There are only a couple things you can really do. FIrst, try removing the memory card and try it. Than if that dosen't work. Try holding power button while gently wiggleing the zoom.

here is link of the manual
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/urg00844/Z8612_UG_GLB_en.pdf

Not sure if this will help, but you might try removing the batteries from camera, then see if it responds on the dock, if so it is most likely bad battery. That battery should be easy enough to find at locally. You might wanna try the Interactive Troubleshooter on Kodak's site. http://www.kodak.com/global/en/service/products/ekn030483.jhtml?pq-path=6861