Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Im gettina an f70 f71 code on my machine what does it means?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

F70=CENTRAL CONTROL UNIT HEARTBEAT FAILURE
If a Central Control Unit Heartbeat Failure is displayed, no communication is detected from the Central Control Unit to the User Interface.
F71=USER INTERFACE HEARTBEAT FAILURE
If a Central Control Unit Heartbeat Failure is displayed, no communication is detected from the User Interface to the Central Control Unit.

Repair Sequence:
1. Check for continuity of the User Interface harness.
2. Check wire harness connections to the User Interface and the Central Control Unit.
3. Replace User Interface if drum is rotating.
4. Replace Central Control Unit if drum is not moving

user interface is about $195 New;CCU is about $200. Hope this helps!

Posted on May 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do the following codes mean: F70 and F71. My washer is a Kenmore Elite HE5t. Thank you


Hello,

The F70&F71 mean basically the same thing

F70 means the main control board is not communicating with the cycle selector/touch pad control
F71 means the cycle selector/touch pad controlis not communicating with the main control board

What needs to be checked is the wires between the main control(CCU) and the selector(user interface) for good tight connections
If all connections are good and tight the CCU has to be replaced IF the drum will rotate under power from the motor

OR if the drum will NOT rotate under power of the motor the USER INTERFACE needs to be replaced

Gene

Aug 18, 2011 | Kenmore Washing Machines

1 Answer

My washer is not operating properly. please tell me what code F71 means and how to fix the problem. Thank you.


Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Dec 11, 2010 | Kenmore 47081 Front Load Washer

1 Answer

Getting code F70 and F71.


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool Duet washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Oct 28, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

What does F71 mean ? This comes up half way through the cycle


Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Oct 20, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I got an F70 code . After unplugging the machine and then plugging it back in, I now get an F71 code. What to do?


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Oct 16, 2010 | Kenmore Elite HE5t Washer

1 Answer

Getting code f70 & f71 washer will not run water does not fill or spin


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Jun 06, 2010 | Kenmore 47081 Front Load Washer

1 Answer

No communication between UI and CCU


Hi.

I think that by this time you already fixed the problem. The codes indicate usually a fault that is either CCU or MCU.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

May 03, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

There is an error code f70 and there was an error code f71.


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Mar 04, 2010 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...