Question about Tascam Audio Players & Recorders

Open Question

My tascam dm 3200 mixer has a message saying boot device failure

Posted by on

1 Suggested Answer

marsrover
  • 682 Answers

SOURCE: I HAVE A TASCAM DIGITAL

http://www.manualnguide.com/download/manual-guide/tascam-dm-24-digital-mixer-automation-manual.html
setup information in manual above-i think cable will be found in a music equipment store near you.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,i have connected phono cables from mixer to anolog in on marantz dr4050 and from anolog out on marantz dr4050 to input on amp,there is no sound unless you turn levels to max and then it is very quiet...


So you're saying an unnamed mixer is feeding a potential analog signal to a CDR. You're monitoring the CDR output at an unnamed amp.

You haven't established that there is any signal to BE heard.

WHAT is the actual source sound device (BEFORE the mixer)? Is the source input visible on the CDR when it's in Record Mode?
Have you perused the manuals?

NEVER USE EXCEPTIONALLY HIGH VOLUME SETTINGS FOR TROUBLESHOOTING. If a signal is inaudible at half volume it's effectively not there. YOU WILL BLOW SOMETHING UP WHEN YOU FIND THE MISPLACED CONTROL AND FLIP IT.

Jun 07, 2011 | Audio Players & Recorders

1 Answer

Manual required for tascam portastudio 03


If you have the model DP-03 then the manual download can be found at:
http://tascam.com/product/dp-03/downloads/

If that is not your model, the other models manuals can be found at:
http://tascam.com/support/downloads/

Jun 02, 2011 | Tascam Audio Players & Recorders

2 Answers

I need the manual for my tascam 564 portastudio md


Hi, to get the manual for your tascam 564 portastudio m, Follow the below instruction.
Use the link below and download the manual.

safemanuals.com/414159.php?ID=569156&k=2a7233162abb6529fd7a0eb0247a71cd&q=TASCAM%20564%20PORTASTUDIO



Copy the 4 numbers you see below and click on download the user's guide.

Have a nice day.

Mar 01, 2011 | Tascam Audio Players & Recorders

1 Answer

Will the tascam dx-4d dbx work with regular mixer? Or do you have to have a reel to reel for this to work?


Of course it will work, as any processor would, but this type of encode/decode noise reduction is really for media that have inherent noise to begin with, like analog tape. Digital recording on media with reasonable dynamic range capabilities would not benefit from it.

If you DID ENcode your recordings with something like dbx noise reduction you would have to DEcode it for proper playback, so you would be dependent on its availability for playback.

Jan 28, 2011 | Audio Players & Recorders

1 Answer

How do I hook up my tascam fw1082 to a mixing board?


Hi, There are two ways you can connect it up. You have a TRS (Tip Ring Sleeve) monitor output that could be patched into the inputs of any analog mixer, balanced high level inputs.
You also have a S/PDIF stereo out. If a digital mixer doesn't accept S/PDIF you can get a converter to change S/PDIF to an AES, which any pro digital mixer will work with. I think HOSA has one for about $60.00, you might find something on Ebay as well.
Here is a Link to the TASCAM Spec page for you FW-1082

http://tascam.com/product/fw-1082/specifications/

I hope this helps,
Best Regards,
Mark

Jan 26, 2011 | Tascam Audio Players & Recorders

1 Answer

I have an avr 3200 can it use 2 coaxial inputs and how good is the sound quality compared to newer avrs


Denon being one of the best names in the biz and this being an upper-crust modfel, I'd say anyone without a 'golden-ear' would be hard pressed to t\distinguish its sound from any other amplifier in existence.

The Denon site doesn't list and AVR-3200, but the AVR-3300 has 1 coaxial digital audio and 3 optical digital audio inputs.

If you're looking to run multiple coaxial devices and there aren't enough inputs this is what I do...

Helpful hint: Coaxial digital audio cables can be joined using an RCA cable splitter so they can share a given input or distribute a given output to multiple places. You just have to remember to have only the DESIRED units turned on when sharing or there will be digital confusion on the buss and it will result in silence or horrendous noise.

Jan 15, 2011 | Denon AVR-3200 Receiver

1 Answer

On my Tascam DP-02 I am recieving an "error 50" message telling me to re-boot


I called support concerning the same problem and they advised me the only solutiion is to restore the DP 02 to its initial factory settings (Track Edit, cursor up, and power on simultaneously until the Dp asks Are you sure?) This will erase your hard drive. I've had this machine for less than two months and I'm really disappointed. Prior to this latest episode the DP would not let me load two songs, telling me File Error 1005 FF (Pwr off).

Jun 14, 2010 | Audio Players & Recorders

1 Answer

I HAVE A TASCAM DIGITAL MIXER TYPE DM-4800. I NEED IT TO CONTROL MY TASCAM HARD DISC RECORDER TYPE X-48. I NEED CABLE CONNECTION AND SETUP INFORMATION


http://www.manualnguide.com/download/manual-guide/tascam-dm-24-digital-mixer-automation-manual.html
setup information in manual above-i think cable will be found in a music equipment store near you.

Jul 18, 2008 | Tascam Audio Players & Recorders

1 Answer

Tascam 238 tape deck


Common problem with these decks-the capstan motor needs to be replaced- A DIY job if you are careful and have some mechanical common sense- Tascam still sells these motors, around $100

Mar 21, 2008 | Tascam Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tascam Audio Players & Recorders Experts

Sam Palermo
Sam Palermo

Level 3 Expert

1252 Answers

John
John

Level 2 Expert

473 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a Tascam Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...