Question about Roland Vs-2000CD Digital Studio Workstation System

1 Answer

Roland VS2000Cd Shift Key not working

I've just bought a VS2000CD on ebay. I'm going through the manual and want to navigate to the Project page. I hold down shift and press the F1 button,. The little box on the screen above F1 changes to "project" and stays that way until i release the shift button. The enter/yes and the exit/no buttons both flash, I press enter/yes, the screen reverts to the way it was before I began.
Is the machine faulty or am I doing something wrong? I hope it's me. Any help gratefully recieved.
LFD

Posted by on

  • Anonymous Feb 07, 2009

    how do i change the screen? i press either button and the shift key still wont function properly

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There's a button near the F buttons that lets you choose between the lcd screen and the vga screen!
I was on the wrong setting.
Simple!

Posted on Aug 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service manual for the roland piano kr375


Your best bet would be to contact Roland directly to obtain a service manual. Go to the Support link at the top of this page- Roland

Jan 15, 2015 | Roland Music

1 Answer

Replace broken hammer key on roland kr 575


I've actually repaired two broken hammer keys on my Roland KR-575, after paying $250 (TWICE) for a repairman to come to my house and fix two other keys.
The repair I completed was about four of five years ago. I searched the internet and found great instructions to print out. Unfortunately, I can't find them again. HOWEVER, I did find this video: Roland Keyboard Repair. It shows you the hardest thing about the repair - how to take the cover(s) off to get to the keys! The video is not as detailed as the instructions I used before - but pretty good. The parts cost me about $25.

Unfortunately (for me) I have yet another key to fix now. This time I will take pictures and notes and update here with my results. It might take several weeks though (I'm trying to finish a big school project). In the mean time, try the video. I don't recommend trying super-glue like the video says, but sometimes finding parts is difficult, so I guess that might be an option if you couldn't get the parts easily. I just don't think a weight repaired with super glue will last very long.

Here are a few suggestions to find the parts you will need:
My other advice is to keep careful track of all the different screws you take out - and away from kids, grandkids, and pets - so you can put them back in the right place after your key repair is finished. (The screws that is ;)

Apr 22, 2012 | Roland Music

1 Answer

Hi,I just bought a Roland FS 1 footswitch.I have a Laney AOR 100 tube amp which takes a Laney FS 1 footswitch.I was hoping the Roland would work with my Laney but it doenst.I bought the Roland used as well...


OFTEN Roland has the opposite sense of normally closed contacts versus normally open. Test the switch with any continuity tester or an ohmmeter to see that the contacts work and come out to the switch. ALSO some amps require a TRS type connection (three wire plug) and others do not. From the schematic it appears that the Laney may REQUIRE a normally closed contact. There is also a pull switch involved that you MAY have to change the state of for operation of the pedal.

Here is the scheamtic for your amp:

http://elektrotanya.com/laney_aor100h_sch.jpg/download.html

Scroll down to the link at the page "Get Manual" and click to download. It is a JPG type file.

Apr 22, 2011 | Roland FS1 Footswitch Pedal Switch

1 Answer

Roland VS 2480 v2 - working on album and received error message "load project please wait" since last night. have tried turning machine off and on and unplugging it. still same message.


Hi, have you tried to do a factory reset?

Hold SHIFT and press F4 (Utility). Press PAGE to get to page 3. Press F6 (PrmIni). Press F5. Press ENTER/YES.

If the factory reset does not fix the problem i think you have to format the disk because it has a fragmented disk .......

Dec 12, 2010 | Roland Vs2400CD Digital Workstation W/CD...

2 Answers

When I turn on my roland vs 2480 it never makes it past the load project start up screen. What can I do? please help


moz-screenshot.pngHave you tried to do a factory reset?

Hold SHIFT and press F4 (Utility). Press PAGE to get to page 3. Press F6 (PrmIni). Press F5. Press ENTER/YES

Dec 03, 2010 | Roland Vs2400CD Digital Workstation W/CD...

1 Answer

Bought a used uniden maptrax tax 430 gps navigation system on ebay. unit came without instructions and we don't know how to use it.


Hi krause234...Not sure if you have fixed this problem and found a users manual yet.. If you haven't you can go to http://www.uniden.com.au/AUSTRALIA/cs_operating_manuals.asp

Scroll down the page until you come to the GPS Navigation...

Hope it helps.

Dec 27, 2009 | Uniden TRAX350 Car GPS Receiver

1 Answer

Roland VS2000CD


Shelly, I have a 2480 but it must be very similar. Import the drum track as a wav file into two of your tracks within the same project. You must make sure the file is a WAV file and nothing else.

Hope it works, on the 2400, I am sure it must since it is a must have.

Mike

Dec 16, 2007 | Roland Vs-2000CD Digital Studio...

2 Answers

LG home theatre system model LH-T1000


Hi I have the same tv. How is the video signal coming out of the dvd player and what is it plugged into on the tv. I travel for a living and coach my wife over the phone all the time.

Sep 17, 2007 | Audio Players & Recorders

3 Answers

Roland vs 2000cd studio workstation/harddisk recorder.


I have figured out a way to get around this problem without losing your data or sending it to Roland. I have three roland 2480s and have 4 hard drives. Buy another spare drive and when you load up to a different IDE drive shut it down, then put the old drive back into the unit and it will boot from the last known ide. Make sure it is not the same IDE # that was giving you the problem. You will get at your files but you better start to backup and defrag. I will not delete files on my roland unless I am willing to defrag. Buy an extra drive from a third party. You can see a company that sells this stuff on ebay and they are very good. "VS something store."

Aug 10, 2007 | Roland Vs-2000CD Digital Studio...

Not finding what you are looking for?
Roland Vs-2000CD Digital Studio Workstation System Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roland Audio Players & Recorders Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Joseph Mueller
Joseph Mueller

Level 2 Expert

338 Answers

Are you a Roland Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...