I put a new sandisk in and the camera screen keeps going to the Format screen, and wont go away nor go to another screem if i press menu, what to do?

You need to get rid of the pics in the internal memory. With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert your card and it should work properly.

First, be sure the card slide switch is in the unlocked position. Then, insert the card,ignore the message on the screen and go into the camera menu to find "format"...then, follow the on-screen instructions.

Remove the card...turn on the camera and go into the menu...find "reset"...follow the on-screen instructions. Then try to format the card again.

Yes you will have to format it in your new camera. In most cameras, just go into the menu and scroll to "format" and follow the on-screen instructions.

choose format card ...from the menu ...this will do ...

Do you have a digital camera .... if yes then go to the menu and to the format command and format it or if you have a PC then put the card in a Card reader and right click it and select format and press start

Try this;

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.






Best of Luck.

Try this;

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.





Best of Luck.

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.

Best of Luck.

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted. http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe You need to put the device into "recovery mode" before you run the tool. - Turn the device off (hold power for 20 seconds) - Slide the hold switch into "hold" position. - Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer. Then run the recovery tool. Select format when prompted. Best of Luck.