Question about Mitsubishi WD-52525 52" Rear Projection HDTV

4 Answers

T.v. wont stay on

Tried pushing input and menu  buttons and got two blinking lights a pause and two more blinking lights what does this mean. still have no picture turns on but wont stay on

Posted by on

  • tjgitto Aug 26, 2008

    threre is a status light by the power button it keeps blinking red and tv will not turn on hit reset button tv came on then turned back off after 1min.

×

4 Answers

Lamp sign on tv turns to red, what does it mean?

Posted on Aug 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Error message airflow blocked tv will shutdown in a few seconfs

Posted on Aug 21, 2008

  • drdeath57 Aug 21, 2008

    model 52530 airflow blocked error message, i move it a little and the mrssage goes away

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

You need to post the model number so i can tell you is wrong with it

Posted on Aug 20, 2008

  • tcoom11 Nov 29, 2010

    shop_tech I have a WD-52525 the screen has patches of fuzz while watching the when I pull up the menus theres no fuzz on the menus but still in background they are almost diagonal lines swaying. there is also a ping pong ball size circle that floats up and down on the right side of screen do you know what part is going out would I be able replace myself? do your-self difficulty?

×

Hello it sound's like you have a power supply problem. need's to be replaced. "good luck"

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turns itself off and then won't stay on


Do the self check.

If you unplugged the set, plug it back, turn it on and allow to fail.

Press both the Menu and Input (input may be labeled device) buttons on the front of the set and Hold both for at least 5 seconds and release both.

Power light will begin to blink a two digit error code like 2 blinks, 2 blinks, pause and repeat it for a total of 5 times.

Let me know what error you find and I tell you the meaning and a possible answer.

Dec 21, 2012 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

When I push the on button the green light comes on for second or two then goes out.(will not stay turned on long enough to even get a picture on the screen.Mitsibishi Model # WS-55315


This set has a self check feature--if set has been unplugged it clears the error buffer--plug in and try to turn on set.

When green light comes on and then goes off ON THE FRONT OF THE SET press and hold BOTH the menu and input(device) buttons at same time for at least 5 seconds and release both buttons.

Power light will blink a 2 digit error code like 2 blinks, 2 blinks, a pause and repeat the code for a total of five times.

Let me know what error code you find and I will explain it.

May 27, 2012 | Mitsubishi Projection Televisions

1 Answer

Tv will not stay on


If an older rear projection Mitsubishi: When green power light comes on and goes out do the self check for errors.

Press and hold both the input and menu buttons at same time on front of set for at least 5 seconds and release both.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know if you find an error code and I will tell you what it means.

Mar 01, 2012 | Mitsubishi Projection Televisions

1 Answer

MY TV WONT STAY ON. WE TURN IT ON IT TURNS OFF. WE DID THE RESET SYSTEM BUTTON.


when it shuts off and power light goes off do the self check this model has.

When green light (power) goes out, on front of set press and hold both the menu and Input buttons for at least 5 seconds and release both.

WATCH THE POWER LIGHT closely, the light should blink a two digit error code.

for example, 2 blinks, 2 blinks and a pause, it should repeat the code at least five times.

Let me know what code you detect and I will tell you what it means.

SD TECH

Feb 12, 2011 | Mitsubishi WS-55511 55" Rear Projection...

2 Answers

Turns off immediately after turned on


Do the self check it should have: when shuts down and green light goes out: On the front of the set press and hold both input and menu buttons at the same time for at least 5 seconds and then release both.

Power light on set should blink a two digit error code: like 2 blink,2 blink, pause and repeat it at least 5 times total.


Let me know what error code and I will tell you what it means.


If this has helped you, rate this solution as I do this here for free.



SD TECH

Aug 15, 2010 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Tv WONT STAY ON


When the power light comes on and then goes off perform the self check feature the model you indicated has:

On the front of the press and hold both the MENU and INPUT (DEVICE) BUTTONS both for at least 5 seconds and release both buttons.

The green power light should blink a two digit error code--most common is 2 blinks, a pause and 2 blinks.

Let me know what error code you find and I will tell you what it means.

If this information has helped you rate this solution as I do this here for free.

SD TECH

Dec 23, 2009 | Mitsubishi WT-46809 46" Rear Projection...

1 Answer

Will not turn on, 3 seconds after pushing power button turns off again. Thanks!


Engage the self diagnostic feature that this set has:

after set shuts off; On front of set push and hold both the Menu and Input buttons in together for 5 seconds and release both buttons.

The power light should blink a two digit error code (it will repeat it about 10 times) for example: two blinks, a pause, and two blinks (this is the most common error code)

Let me know what the error code is and I will tell you what it means

SD TECH

Sep 29, 2009 | Mitsubishi WS-65809 65" Rear Projection...

2 Answers

Mitsubishi WS-55909 dm board repair


I have the same TV and the error light code on my set is 22

May 31, 2009 | Mitsubishi WS-55809 55" Rear Projection...

3 Answers

Mitsubishi WS-55909 dm board repair


The DM is fine if the led isnt blinking. Your set is going into protective shutdown. Try pressing the menu and the device/input buttons on the set both in together for 5 seconds to see if the set will blink a series of blinks pause then blink another series of blinks. Such as 2 blinks pause then 2 blinks, Then let me know what the blinks were and I will assist you with whats wrong

May 28, 2009 | Mitsubishi WS-55809 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...