Question about RCA 32V420T 32" TV

1 Answer

RCA 36 V 430 T

My wife was watching the TV when it made several "popping" noises and the picture went black. The cable box and the receiver for the home stereo system continued to have power. From the remote,, the cable box (digital) as well as the receiver would turn on and off. The green light that shows that the TV is on would not come on, either with te remote or by manually pushing the button. We checked all conections as well as making sure that the wall outlet was live. The TV is pluged into its own outlet. In my day, the TV would occasionally "blow a fuse", but I don't think this is relevent any more, and I would not even think to poke around inside!
New TV, simple fix? Please advise.
Thanks,
Scott

Posted by on

  • Anonymous Sep 10, 2008

    watching tv and it went black can not get it to come back on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You will have a bad HVT and Horz output. repair is about 85.00-150.00 depeding on who repairs it. However, after 25 years of repairing TV, if you ask me, save your money, buy another TV, this unit has tons of costly repair problems, that is not easy to fix.

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get my TV to play through my surround sound system


I don't know which receiver you have but, I can give you a basic idea.
You need RCA cables Yellow for Video, Red and White for Audio.
You may not need to connect the Yellow cable for the Video again, it depends on the receiver you're using. Basically, to get the TV sound from your Surround system, you only need the white and Red RCA cables.
Connect one side of the RCA cable white & Red to the receiver (IN) and the other side of the RCA Cable to the TV or cable box (out) You need to select the source on the receiver, AUX or Video.

I could help better if I knew which receiver, if you're using a cable box and how are you getting TV signal? do you select CH 3 or AV to watch TV?

Best of luck to you.
AAA TV SERVICE
www.aaatvservice.com

Jul 31, 2011 | Samsung TXK2766 27" TV

1 Answer

No picture or sound on some channels


we cannot get a picture or sound on several channels. Otherwise the TV works fine. Any solutions? as you get p&s on several channels so your ser is ok the problem 1 loose contact near tuner or it is defective. 2 tuner signal line .

Sep 16, 2007 | Toshiba 20AF44 20" TV

1 Answer

Hi My wife was watching our 2002 Panasonic CT36SX12CF model t.v last night, all of a sudden there was a pop noise and the screen went black. The tv would not turn on again. Any ideas what the problem...


hey Al more than likelly it was the fuse that popped if you take the back panel off the fuse is next to the power cord and should take a 6.3 amp 125-250 volt fuse

Oct 31, 2010 | Panasonic CT-36SX12 36" TV

1 Answer

38 '' RCA TV XBOX Model 36V550T, lost the picture


Does it only happen when you use your Xbox?

Try pulling the cable in and out between the TV and Xbox

Dec 05, 2009 | RCA 36V430T 36" TV

2 Answers

My 36' RCA TV JUST QUIT WORKING. TURNED ON POWER


A shorted horizontal output transistor or shorted flyback. If the flyback is shorted replace also its HOT.

Apr 05, 2009 | RCA F36650 36" TV

1 Answer

Unusable Signal


I have exactly the same problem, with my RCA F27645. I can find no answers on the internet, so far.

I have 3 ideas.

1) The digital signal receiver must not be receiving the DVD signal properly.

2) Coaxial cable receiver (the little pin plug) problem

3) Digital TV (broadcasts) causing havoc on older TVs.

Mar 27, 2008 | RCA 27V530T 27" TV

1 Answer

No life


sounds like the sat receiver not the tv.

Mar 23, 2008 | RCA F36669 36" TV

1 Answer

RCA has no sound


well u have a problem in the audio circuits of the tv which includes the speaker itself. but most of the time the audio power output transistor or ic get easily damaged resulting a no sound tv. if u dont have any idea with regards to this, i suggest have it check with a qualified service technician. it will not cost u a lot for sure.

Jan 17, 2007 | RCA F36665 36" TV

1 Answer

RCA works fine when watching dvd but when cable is hooked up...


Similiar problem on this Chassis,( Popping + Sreeen Collapse)
Found Leaky 470 uf cap. near vertical output ic .( B+ Filter)
TechServices @Gmail.com

Sep 05, 2006 | RCA F20TF10 20" TV

Not finding what you are looking for?
RCA 32V420T 32" TV Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68427 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...