Tata Photon home page does not open directly.

Try here for a user manual: http://www.tataphoton.com/tata-photon-plus-manual.aspx

use black tata photon device before buying just plug and try with the demo tata photon from the distributor you are buying. in lion only few device are been supported

hi Lokendra,
Can you please email the firmware v 1.07 to me? the tata photon model that I am using is EC156.
Many thanks for supporting. My Email id is [email protected]

Hi,
1.First connect TATA Photon USB modem to your computer.
2.Now it will install necessary drivers.
3.Now open Access Manager CDROM and run AutoRun.exe.
4.Now start Huawei Access Manager program.
5.Now now in the Activate option type *228 and press activate button.
6.Now close Access Manager Program and unplug tata photon.
7.After sometime again plug it and start surfing.

this means you are not connected to the internet, are you using prepaid or postpaid for your tata photon? You could have reached your allowance for the month.

Please connect the TATA Photon + to the USB port of the computer and then install the TATA Photon + Software which is bundled with the device. Try to connect for the Internet.

Use following steps to setup your tata photon.
1.First connect usb modem to router via your LAN.
2.now open web browser.
3.If asked for username and password, juts enter default username and password that you get with used guide.
4.Now open WAN setting.
5.Now select AutoPan.
6.Obtain DNS server address automatically.
7.Now save setting and restart your computer

Other way:
You have to use following steps to activate the modem through Account Tool:
1.First put data card in the system.
2.Now open Account tool option.
3.There you will find three option like MIN, SUB ID, SPC.
4.Now in the SPC type 000000 and press write button.
5.Now close the dialog box and restart computer. Other way: Use following steps to Install and Activate TATA Photon on your computer.
1.First connect your TATA Photon USB modem to your computer. Now wait for few minutes until drivers of your USB modem installed in your computer.
2.Now go to the device manager and check whether your modem is configured or not. Now go to the modem properties and in the advanced option type 'AT+CRM=1' . It is used to modem faster.
3.Now install the Huawei software manager.
4.Now check whether device is identified as 'HISA' or not.
5. Now go to the activate option. Now type *228 and click on the activate button.
If asked for password, just type "0000" as default password.

Dear frnd

kindly download the epivalley modem software for windows 7 and revert

http://www.tataphoton.com/download/dialers/Windows7_dialer_for_SEC8089.zip

there is a inbuilt drivers present in the tata photon modem ,u only need to install it from desktop icon[tata photon icon wll come]

if u still cant install it ,i can provide u manual settings

kindly rate and revert