Question about Nokia BH-905I Bluetooth Headset

Open Question

I cant get the microphone to work while being hooked up(with a wire) with the voip adapter to my computer. I can get it to work with bluetoooth over voip(so its not because the microphone doesn't work), with the handsfree/headset audio profile, but that sounds absolutely horrible. 1. I have tried with two different computers through 4different programs, and the result is all the same. 2. I have tried with both the wires(the ones connecting from the headset to the adapter) and the result is the same, so I doubt its the wires. 3. I have tried with a different headset on both the aforementioned computers, and it works perfectly, its its not the computers fault either. 4. I can hear sound just fine through the voip adapter, but I get nothing but static sound when trying to use the mic(recording what im saying etc).

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ImWireless
  • 113 Answers

SOURCE: I've lost the instructions and don't know how to get it to work.

Please download the instructions from this link http://nds2.nokia.com/files/support/apac/phones/guides/Wireless_Headset_hdw2_en.pdf

Posted on Feb 28, 2007

Ad
  • 9 Answers

SOURCE: HS-23 Nokia Headset

hey kev.. all i can ask you is ... the following 1) open the ear piece of the non working .. then take a multimeter (keep meter in resistance mode) and check the resitance if its good it will show you.. apx 32 0hm and if its showing you 0 or .1 or below 16 ohms.. 2) after you disconnect the speaker.. the broken one that is... chek the cable connectivity.. or rather continuity.. for this keep the meter in continuity mode the pervious resistance mode.. then take one wire and connect one prob from meter to it.. and take the other prob and connect ti too the pins of the cnnector.. ( here is there are 4 pins dedicated to the ear phone.. 2 for each.. nd they are towards the end sid.. just below the # key.. frm # key the last 4 pins connectors are for audio.. ) check the.. pins on the cord connector not the phone.. i hope you can find what wrong with your... head set now.. and yeah if the speaker is out jsut replace both the ear piece with sony or aiwa earphones.. it wil work best if your cable is gone then all the best buy a new one tc aditya

Posted on Sep 04, 2007

  • 4 Answers

SOURCE: Nokia 6255i (or 6256i) Verizon

check the tracks of mic to headphone

Posted on Jan 08, 2008

  • 10 Answers

SOURCE: nokia 3250

Get a new phone, hope you have insurance, or pray it's under warrenty. Face it the mic is dead

Posted on Jan 17, 2008

SOURCE: need help for hs-23 headset repair

In this middle section, the wires are as follows: MIC+: Yellow MIC-: Black L+: Blue L-: Copper/Grey Stripe? R+: Copper R-: Copper/Grey Stripe? (same as L-, they should be interchangeable...) Sirial?: Yellow/Orange Stripe Uout: Red GND: Green Hope this helps!

Posted on Jun 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you connect phone


If you want to use VOIP (voice over internet protocol), you'll need cable, dsl or faster connection, a router, and hardware to plug the phone into the router or a USB connection, such as that available through the Magicjack.

Skype and some others use your computer speakers and microphone, so you don't need an adapter.

You need to study the subject more before deciding what route to take.

Do a Google search on "voip products".

Dec 12, 2013 | Dell Studio Xps 8100 Desktop Computer

Tip

How to reset your VOIP modem


If you are having trouble connecting to the internet, please try these steps.<br /><br />1.Unplug the power to your modem. This is the box from your cable or DSL provider. <br /><br />2.Unplug the power to your VOIP phone adapter. If you don't have one skip this step. <br /><br />3.Unplug the power to your router. Wait 45 seconds, then Plug in your modem and wait for lights to stabilize on a specific pattern. (Usually takes about 1 minute) <br /><br />4.Plug in your VOIP phone adapter (if you have VOIP service) and wait until you have a dial tone on your phone again. If you don't have VOIP or know what VIOP is, skip this step.<br /><br />5.Plug in your VOIP phone adapter (if you have VOIP service) and wait until you have a dial tone on your phone again. If you don't have VOIP or know what VIOP is, skip this step. <br /><br />You may need to restart your computer for this to work :)<br />

on Mar 16, 2011 | Computers & Internet

2 Answers

Windows cannot find any networks on a HP530 Laptop, the wireless works only when manually connected


Your router is likely configured to not "Broadcast" its SSID name. You need to reconfigure the router to broadcast the SSID.

Mar 15, 2011 | Computers & Internet

1 Answer

How to use olympus telephone pickup tp7


Look this instructions is the same operation Comparable Models:
  • SONY ECM-TL1 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
  • Olympus TP7 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
  • TC-L Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
  • CC-10 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
  • CC-20 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
  • TC-W Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter http://www.tvps.com/ecsdownloads/ECS-EBPR/ECS-EBPR-Cordless-Cellular-Telephone-Recording-Adaptor.pdf

Feb 11, 2010 | Olympus Audio Players & Recorders

2 Answers

CANNOT MAKE MICROPHONE WORK ON TOSHIBA SATELLITE


goto control panel and then hardware and then sound option and then microphone

Jan 18, 2010 | HP Pavilion dv1000 Notebook

1 Answer

Have system for voip. Only can't hook up the


Try getting a router that has one in/4 out between modem n voip. Your voip unit should have an RJ45 connector to connect to router, not your computer. The USB connector might be to connect the voip to a different type of router, and will not be used. The 2 phone connectors are for two different phone lines that your voip provider can provide you with.

Sep 20, 2009 | Toshiba DOCSIS Cable PCX2600 (DAZ8823A-R)...

2 Answers

IP ADDRESS OF VOIP PHONE ADAPTER 2 PORT PAP2NA


doanload colosoft netscan, when you have it plugged into the network, run netscan on a computer thats on the same network....that'll find it for you, if that doesnt work give me the specs on the phone and ill check the manuels..

Jan 22, 2009 | Linksys VOIP PHONE ADAPTER 2-PORT (PAP2NA)...

1 Answer

DLINK G604T GENII, DLINK DWL G122 n laptop wireless adapter


It may also be an issue with a firewall on either computer. If you have McAfee, Norton or Windows Firewall enabled, disable it on both side and try the file sharing again. If it works, you will know that you have to check you firewall rules.

Apr 15, 2008 | D-Link AirPlus G DWL-G122 802.11g/b...

1 Answer

Not able to connect my voip adapter to internet


hello sir iam working for voip and iam a tech?
and u r using linksys pap2 which is not a router its just a phone adapter so it will work through a router so try this first
is ur modem is a modem router and u have 4 ether net port on it and u can able to access inter net through hard wired and connect this pap 2 adapter through one of the ether net jack on the modem router (ut starcom)>an dit has a fire wall which block ur voice signals so u need to open some ports on it try this link to open all ports and u need to try this with a pc which connected through hard wired on the modem router go to through this link
http://www.portforward.com/english/routers/port_forwarding/UTStarcom/UT-300R2U/Vonage.htm

and also disable the fire wall on the router screen and reboot the linksys pap2 and ur ut star com modem router also and connect ur phone directly to phone jack 1 on the pap 2 device if u have any issues let me know
and rate me solved if its helps thx

Dec 04, 2007 | Linksys VOIP VONAGE PHONE ADPTR 2-PORT...

4 Answers

VOIP will no ring


Just "VOIP Phone" is not enough information to help you. There are many hundreds of different phones, connections, & setups you could have. What type of phone (make, model number)? Is this a VOIP phone connected through a home network, cable modem etc.. for home use? Is it a single line phone connected to a VOIP box connected to your cable modem? Is it a VOIP phone system connected to regular copper phone lines? Are you using a VOIP phone at home connected to a VOIP phone system at work?

Nov 17, 2007 | Lands Phones

Not finding what you are looking for?
Nokia BH-905I Bluetooth Headset Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Radio Communications Experts

shaun taylor

Level 3 Expert

1525 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Nokia Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...