Epson r230 2 red signal - Epson STYLUS R230 InkJet Photo Printer

open maintenance and check the ink first
then go to clean head many times

printer has reached its service life, try to look in the internet for a printer resetter tool epson printer ink

please, i have problem with my epson ex50 projector it doubles images on the page

Hi.

Please use this driver download page: Epson Stylus Photo R230

Download and then run the driver files from the page above. Ensure that you select the correct driver for your operative system.

Here also a tip with driver pages for different printers How to install a printer is a driver software...

Regards.

Ginko

An image is produced in these projectors by passing color through three different LCD panels. One is a Red, one a blue, and the last one a purple. It sounds like the green panel is damaged. The only way to tell is to take it to an Epson authorized service center.

You don't clearly described your problem. what types of problem of your printer? is it show red signal when you command print. i mean all signal light are on? if that then the way is unlock your printer by ssc service utility software. if not then please contract with me by mail.

make sure the signal matches. you could reset the settings to factory default.

check for the error indicator in the projector, if the bulb light is flashing red, then i think you need to clean the units ventilation fan, if cleaning doesnt solve the problem, you have to replace the bulb.

My Epson photo R230 printer memory full, eror my printer has beeb seen two red light signal everytime.

i figured it out. open it up, and make sure the ribbon cables are securely plugged in.