How can i set time and date in a welch allyn ekg at-2 plus interpretative

HI,
To set time on the schiller AT2 do the following.
1. Power ON the machine.
2. Press the following key sequence ALT,9,1,1.
3 Now enter the time using the digit key (HHMMSS)
You will hear the conformation beep indicating that the time is seted.

To set the date on schiller AT2 Do the following.

1. Press the following key sequence ALT ,9,2,2.
2. Enter the date using the digit key (DDMMYY)
You will hear a conformation beep indicating that the date is seted.
ok

hi,
If you need to know how to place the leads then whach the following video. All 12 channel ecg machines have the same lead placement

To change the date, hit the ALT key followed by 911 then enter the time in this format: HHMMSS.Then hit the Alt key followed by 922 then enter the date in this format DDMMYY.Note that on some units you may have to enter the date in this format MMDDYYtry both ways and keep the one that works. Test with an printout.

hi,
Change the battery, will solve your problem. Its a 12v battery. For replacing the battery you have to open the ecg machine by removing the screws at its bottom.
ok

hi,
usually in AT-2 battery is located inside the machine. u have to pullout the top cover by removing the screws. be care full while pulling up the top cover, there are key pad connections running into the main board.on the right corner u can see the 12v battery.
ok

Sometimes you can print out a report even though you are not connected to a patient. If a report prints out you will see "interpretation" on the top middle of the page. If interpretation is not there it most likely means you do not have interpretation. You could also call welch allyn and give them the serial number. They will be able to tell you.
If you have further questions you can contact me at [email protected] or through our website www.overstockme.com

press Alt then 9 - 1 - 1 for the time.

press Alt then 9 - 2 - 2 for the date

i want to configure my Schiller at-2 plus ecg machine from dutch to english and 3channel to 6channel

I have (2) Welch Allyn, 3700/B-2211 Scanteam scanner available for sale.