Question about Curtis-Mathis CM27101S TV

1 Answer

My tv cord is not straight it dont seem to get power to the cord

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Curtis-Mathis Master
  • 1,208 Answers

Chances are real good that the power cord is not the problem. I have repaired this TV a long time ago. The problem will be a bad capacitor. The first, to suspect would be a 160 volt to 200 at 1Mf or 2.2Mf. It will be a small capacitor with a very important job.This capacitor is a power supply capacitor. I cannot recall the location or real value. But this information is very, very close. In the event you know of an electronic enthusiast, show him this note. Have him search with an ESR meter to locate this capacitor. The ESR meter will determine which cap or two you will replace. Thanks for asking and show all hands of support!

Posted on May 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I need the original power cord for my Motorola dct6200?


there is no transformer in the power cord just straight wall power. the dct 6200 does all its power stuff inside the cable box.... thats why there is no "block" on the power cord.

Sep 14, 2013 | Arris DCT6200 DTV Receiver

1 Answer

Norcent model LT-2725 TV to ps3?


Check the video out settings of PS3.

Jul 27, 2012 | Televison & Video

1 Answer

Swap power cord


You should call an electrician as if you cause a fire or damage your insurance company won't cover you. Also you have to get a cord with the "L" shaped spade at the top which is for a dryer and a "straight" spade is for a oven.

Feb 01, 2010 | Whirlpool Dryers

1 Answer

My power cord fell off. Took off the back of the


there is a small board with a small transformer . the plug is located next to that small transformer. if the cord originally came from the right hand side if you are looking at tv from the back. the plug is on that right board. if the tv cord came from the left side, the plug is located on the main board in the front of tv. the plug in both situations are the same, it is white in color and has 2 or three pins sticking straight up.

Nov 15, 2009 | Sony KV-32FS13 TV

1 Answer

The origional power cord broke and we have tried to use several universal power cords....But they don't last long. It seems like the connector doesn't exactly fit.....Dont want to replace the whole...


I have same brand and model and my motor broke so that disks no longer spin, so I have an extra remote, car adaptor, battery and power cord. If interested contact me here or they will be listed in my ecrater store here

Oct 15, 2009 | TruTech PVS12701 Portable DVD Player

2 Answers

I have a Cobra 29 NW LTD Classic I have power going to radio but no power when i turn on knob. i have looked inside for a fuse but can not find one.


did you look for power comming out of your power switch....
dont tell me that you hooked it up backwards. if you did check the imput diodes

Aug 29, 2009 | Cobra 29 LTD CB Radio

1 Answer

Replacement Power Supply Cord for Apex Digital AVL2076


The orignal power cord went out and our Toshiba laptop has a similar cord. The cord for my lap will work with the TV. But i dont know for how long. The tv is for my 5 yr old and we have never used it more than 4-8 hrs straight. You can purchase the cord for about $65 the model# A135-S2256. I hope this helps. I was actually looking for the orignal cord and i have been running into the same problem. So it looks like i'm going to purchase the Toshiba cord too.

Apr 03, 2008 | Apex Digital AVL2076 20 in. EDTV-Ready LCD...

3 Answers

Ilo power cord


You may want to contact Funai. They are the company that makes the Ilo brand. Their parts department may be able to find the cable you need and order it for you. 800-242-7158 parts@funaicorp.com

May 09, 2007 | iLO 2600 Television

1 Answer

Need new power cord


Recommend against soldering the damaged ends together - it's ugly, will never be especially safe, and risks being unreliable too. Have a look at the TV end of the cable. Does it go straight into the TV, or is there a plug that goes into the TV. If there's a plug, just pull it out, take it along to shop that sells TVs and they'll sell you a new one off the shelf. If the cable goes straight into the TV, the solution is just a tiny bit more involved. First, look at the mains plug to check whether it is moulded on, or rewirable. If moulded on, you will need both a new plug, and some flex. If rewireable, you'll only need the flex. Either way, take the cut-off end to Home Depot or somewhere similar and buy something the same shape and size (thickness of the wires is the important thing here). To fit, carefully take the back off the TV and look at how the existing cord was connected and secured before removing it and putting the new one on in exactly the same way. Don't forget to push the wire through the hole in the case (if there is one) before connecting it up. Once the flex is fitted to the TV, fit the plug to the other end. Safety/reliability tip 1 - while the back is off, try not to touch any electrical or electronic components inside the TV other than the power terminals you're supposed to be working on. Saety tip 2 - when renewing a power cord, wire the new cord to the appliance before fitting the plug to the other end of the cord - amazing how many people have helpfully been plugged into the mains in the middle of a job. A.

May 01, 2007 | Mitsubishi VS-60603 60" Rear Projection...

Not finding what you are looking for?
Curtis-Mathis CM27101S TV Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Curtis-Mathis Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Are you a Curtis-Mathis Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...