Question about Office Equipment & Supplies

Ad

1775.97

Posted on May 19, 2011

Ad

1775.97

Posted on May 19, 2011

Ad

1775.97

Posted on May 19, 2011

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

New users get **2 Free calls** (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).

click here to download the app (for users in the US for now) and get all the help you need.

Goodluck!

Posted on Jan 02, 2017

slope or m = (y2 -y1)/(x2-x1)

always start with the same point.

m = (1 - (-5))/(-2-5)

m = (1 + 5)/(-7)

m = 6/-7

m = -6/7

The y-intercept is the b in the equation y=mx+b.

We can use either point to calculate b. Let's use (-2,1). So every time we see x, we put in -2, and every time we see y, we put in 1.

y = -6/7x + b

1 = -6/7 (-2) + b

1 = 12/7 + b

1 = 1 5/7 + b

-5/7 = b

So, y = -6/7x - 5/7

To check, we substitute in the other point and see if the left side is equal to the right side.

LS RS

-5 -6/7(5) - 5/7

-5 -30/7 - 5/7

-5 -35/7

-5 -5

LS = RS

QED

Good luck,

Paul

always start with the same point.

m = (1 - (-5))/(-2-5)

m = (1 + 5)/(-7)

m = 6/-7

m = -6/7

The y-intercept is the b in the equation y=mx+b.

We can use either point to calculate b. Let's use (-2,1). So every time we see x, we put in -2, and every time we see y, we put in 1.

y = -6/7x + b

1 = -6/7 (-2) + b

1 = 12/7 + b

1 = 1 5/7 + b

-5/7 = b

So, y = -6/7x - 5/7

To check, we substitute in the other point and see if the left side is equal to the right side.

LS RS

-5 -6/7(5) - 5/7

-5 -30/7 - 5/7

-5 -35/7

-5 -5

LS = RS

QED

Good luck,

Paul

Mar 23, 2017 | Homework

answered before fixya is not vodacom --NOTIFY vodacom with your request

Oct 12, 2016 | Cell Phones

Fixya does not have HB65 manual posted.

Open following link to identify timer and download manual in English.

If this is not your timer, add a comment with clear description of timer, or in-focus photo of timer posted on flicker, so I can locate possible manual.

http://waterheatertimer.org/Intermatic-timers-and-manuals.html#HB65R

http://waterheatertimer.org/Woods-timers-and-manuals.html#N1506

Open following link to identify timer and download manual in English.

If this is not your timer, add a comment with clear description of timer, or in-focus photo of timer posted on flicker, so I can locate possible manual.

http://waterheatertimer.org/Intermatic-timers-and-manuals.html#HB65R

http://waterheatertimer.org/Woods-timers-and-manuals.html#N1506

Jul 19, 2011 | Garden

Ok i have consulted the shops service manual on that sony model.A blinking led of 7 times is and indication that your audio cuircitry has blown. or shorted. most likely the audio amplifer ic. ic number 3005 on the K cuircit board. Specifically the audio power supply line has become shorted. most likely it would need replaced along with its assocated fuse ps3001

May 28, 2011 | Sony KDS-R60XBR1 60" Projection HDTV

**http://www.hyundai-kuwait.com/locations.aspx**

Location - Shuwaikh

Head Office

Timing: 8:30 AM - 6:00 PM

Tel. No. +965 1 808 444

Fax. No. +965 2 484 8035

Showroom

Timing: 8:30 AM - 12:30 PM & 4:00 AM - 8:00 PM

Tel. No. +965 1 808 444

Fax. No. +965 2 483 9265

Location - Shuwaikh

Service

Timing: 7:30 AM - 4:30 PM

Thursday Timing: 7:30 AM - 1:00 PM

Tel. No. +965 1 808 444

Tel. No. +965 2 483 1077

Fax. No. +965 2 481 7830

Quick Service

Timing: 7:30 AM - 7:30 PM

Parts

Timing: 7:30 AM - 7:30 PM

Tel. No. +965 2 483 1077

Fax. No. +965 2 481 7830

Location - Ahmadi

Showroom

Timing: 8:30 AM - 7:30 PM

Tel. No. +965 1 808 444

Fax. No. +965 2 398 4363

Service

Timing: 8:00 AM - 6:00 PM

Thursday Timing: 8:00 - 1:00

Tel. No. +965 1 808 444

Fax. No. +965 2 398 4363

Parts

Timing: 8:00 AM - 6:00 PM

Thursday Timing: 8.00 - 1.00

Tel. No. +965 1 808 444

Fax. No. +965 2 398 4363

Location - Jahra

Service

Timing: 7:30 AM - 4:30 PM

Thursday Timing: 7:30 AM - 1:00 PM

Tel. No. +965 2 458 7926

Fax. No. +965 2 458 7929

Parts

Timing: 7:30 AM - 4:30 PM

Thursday Timing: 7:30 AM - 1:00 PM

Tel. No. +965 2 458 7927

Fax. No. +965 2 458 7929

**Location - Shuwaikh CanadadryPartsTiming: 8:30 AM - 6:00 PM Mob. No. +965 9 731 9237**

Jan 19, 2011 | Cell Phones

- Press for 5 seconds the TEMP./SELECT/CLOCK but- ton (7) (the hours flash on the display).
- Press the TIME/TOAST COLOR buttons (8) to the desired time (hours). The time set will begin blinking on the display.
- Press the TEMP./SELECT/CLOCK but- ton (7) (the minutes flash on the display).
- Press the TIME/TOAST COLOR buttons (8) to the desired time (minutes). The time set will begin blinking on the display.
- Press the TEMP./SELECT/CLOCK but- ton (7) to confirm. It is pos- sible to press the button at any time during cooking to display the current time (the display shows the time set).

- If you wish to change the hour on the display once it has been set, press the TEMP./SELECT/CLOCK but- ton (7) before proceeding to set the new time as described above.
- It is possible to display the current time even after starting a function, by pressing the TEMP./SELECT/CLOCK button (7) (the time is displayed for 2 seconds).

Oct 14, 2010 | DeLonghi DO400 Toaster Oven with...

Hi,

You find the timing marks on the picture below.

Removal

Remove auxiliary 1. drive belts.

2. Support engine.

Remove:

Engine mounting and bracket.

Timing belt upper cover [1].

3.

4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].

Remove:

Crankshaft pulley bolt [4].

Crankshaft pulley [5]. Use tool No.09213-60017.

5.

6. Ensure timing marks aligned [2] & [3].

7. Slacken tensioner bolt [6]. Move tensioner away from belt and lightly tighten bolt.

Remove:

Timing belt lower cover [7].

Crankshaft sprocket guide washer [9].

Timing belt.

Tensioner pulley.

Installation

Installation

1. Check tensioner pulley for smooth operation.

2. Check free length of tensioner spring is 46,0 mm [8]. Replace spring if necessary.

3. Fit tensioner and spring. Ensure spring is connected correctly.

4. tighten bolt [6].

5. Ensure timing marks aligned [2] & [3].

6. Fit timing belt. Ensure belt is taut between sprockets.

Install:

Crankshaft sprocket guide washer [9].

Timing belt lower cover [7].

Crankshaft pulley [5].

7.

8. Slacken tensioner bolt 1/2 turn [6].

9. Turn crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].

Turn crankshaft slowly 1 7/8 turns clockwise until crankshaft pulley timing mark [3] aligned with 45° BTDC mark [10] on

timing belt lower cover [7].

10.

11. Tighten tensioner bolt [6]. Tightening torque: 42 Nm.

12. Install components in reverse order of removal.

13. Tighten crankshaft pulley bolt [4]. Tightening torque: 108 Nm.

Manufacturer: Toyota

You find the timing marks on the picture below.

Removal

Remove auxiliary 1. drive belts.

2. Support engine.

Remove:

Engine mounting and bracket.

Timing belt upper cover [1].

3.

4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].

Remove:

Crankshaft pulley bolt [4].

Crankshaft pulley [5]. Use tool No.09213-60017.

5.

6. Ensure timing marks aligned [2] & [3].

7. Slacken tensioner bolt [6]. Move tensioner away from belt and lightly tighten bolt.

Remove:

Timing belt lower cover [7].

Crankshaft sprocket guide washer [9].

Timing belt.

Tensioner pulley.

Installation

Installation

1. Check tensioner pulley for smooth operation.

2. Check free length of tensioner spring is 46,0 mm [8]. Replace spring if necessary.

3. Fit tensioner and spring. Ensure spring is connected correctly.

4. tighten bolt [6].

5. Ensure timing marks aligned [2] & [3].

6. Fit timing belt. Ensure belt is taut between sprockets.

Install:

Crankshaft sprocket guide washer [9].

Timing belt lower cover [7].

Crankshaft pulley [5].

7.

8. Slacken tensioner bolt 1/2 turn [6].

9. Turn crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].

Turn crankshaft slowly 1 7/8 turns clockwise until crankshaft pulley timing mark [3] aligned with 45° BTDC mark [10] on

timing belt lower cover [7].

10.

11. Tighten tensioner bolt [6]. Tightening torque: 42 Nm.

12. Install components in reverse order of removal.

13. Tighten crankshaft pulley bolt [4]. Tightening torque: 108 Nm.

Manufacturer: Toyota

Jun 25, 2010 | 1997 Toyota Camry

7 times 7 is 49 (base 10 arithmetic),

and 8 times 8 is 64 (ditto).

SQRT(50) will be between 7 and 8.

SQRT(51) will be between 7 and 8.

SQRT(52) will be between 7 and 8.

SQRT(53) will be between 7 and 8.

SQRT(54) will be between 7 and 8.

SQRT(55) will be between 7 and 8.

SQRT(56) will be between 7 and 8.

SQRT(57) will be between 7 and 8.

SQRT(58) will be between 7 and 8.

SQRT(59) will be between 7 and 8.

SQRT(60) will be between 7 and 8.

SQRT(61) will be between 7 and 8.

SQRT(62) will be between 7 and 8.

SQRT(63) will be between 7 and 8.

Also,

SQRT(50.1) will be between 7 and 8.

SQRT(50.11) will be between 7 and 8.

SQRT(50.111) will be between 7 and 8.

SQRT(50.1111) will be between 7 and 8.

SQRT(50.12345) will be between 7 and 8.

SQRT(50.13567911) will be between 7 and 8.

And so on.

Heck, there's a *LOT* of numbers between 49 and 64. :-)

So, just pick a million or a billion of them.

and 8 times 8 is 64 (ditto).

SQRT(50) will be between 7 and 8.

SQRT(51) will be between 7 and 8.

SQRT(52) will be between 7 and 8.

SQRT(53) will be between 7 and 8.

SQRT(54) will be between 7 and 8.

SQRT(55) will be between 7 and 8.

SQRT(56) will be between 7 and 8.

SQRT(57) will be between 7 and 8.

SQRT(58) will be between 7 and 8.

SQRT(59) will be between 7 and 8.

SQRT(60) will be between 7 and 8.

SQRT(61) will be between 7 and 8.

SQRT(62) will be between 7 and 8.

SQRT(63) will be between 7 and 8.

Also,

SQRT(50.1) will be between 7 and 8.

SQRT(50.11) will be between 7 and 8.

SQRT(50.111) will be between 7 and 8.

SQRT(50.1111) will be between 7 and 8.

SQRT(50.12345) will be between 7 and 8.

SQRT(50.13567911) will be between 7 and 8.

And so on.

Heck, there's a *LOT* of numbers between 49 and 64. :-)

So, just pick a million or a billion of them.

Apr 10, 2010 | Super Tutor Pre Algebra (ESDPALG)

How many times is that light blinking? For example a 7 blink error code would blink 7 times pause 7 times etc. What is your's blinking?

Dec 10, 2009 | Panasonic Viera TH-42PZ80U Plasma TV

Here are already prepared template time sheets of which your description fits several.

http://office.microsoft.com/en-gb/templates/CT101172771033.aspx?av=ZXL000

http://office.microsoft.com/en-gb/templates/CT101172771033.aspx?av=ZXL000

May 30, 2009 | Microsoft Excel for PC

13 people viewed this question

Usually answered in minutes!

×