Question about eMachines Desktop / AMD Athlon Processor / 2GB Memory / 320GB Hard Drive (EL133311F)

1 Answer

I have a emachines amd athlon 64/ 512mb memory / 160gb hadr drive dessk top. when i turn it on the monitor displays no signal and goes off. ihear the prossessor motor running constantly which normally goes off when the monitor comes on.the screen is blank and in order to turn off the computer off i have to unplug it.when it first started to happen over a period of time i'd lose screen and signal so i'd shut it down and restert and it was ok.somebody said it might be a hard drive

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 33 Answers

Please check the cable that connects the monitor to the video card. Reseat the cable, the issue might be a loose connection. You can also try a known good monitor to isolate if it's the video card or monitor that is causing the problem. Something is preventing the monitor from receiving signals from the video card, hence the "no signal" message.

Posted on May 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i find the MAC on my emachines 720 pc ?


Start
Run
cmd
In command window type
ipconfig /all
The physical address of 6 pairs of characters is your MAC.

Jul 01, 2014 | X2 Systemax NO OS AMD Desktop Computer -...

1 Answer

Open case how to el1358g




9xejsknreuu9+p8eghor1yaijqaaaabjru5erkjggg==The Two Thumb Screws above and below.

Feb 25, 2014 | eMachines EL1358G-51W Desktop Computer...

1 Answer

Dvd drive won't open on emachine el1333-21f


use a open paperclip and push it into small hole on the front of the drive its a manual release

Nov 16, 2012 | eMachines Desktop / AMD Athlon Processor /...

1 Answer

I AM TROUBLESHOOTING AN EMACHINE MODEL W3410 AMD ATHLON THAT JUST CONTINUES A LONG REPEATING BEEP AT BOOT AND AM NOT RECIEVING SIGNAL TO MONITOR. IS IT MEMORY OR VIDEO . CAN'T GET A CLEAR TOPIC FOR THE...


Almost always indicative of a RAM memory problem. Troubleshoot by removing 1 stick of memory and rebooting. Switch sticks to determine if either stick of memory is bad or a bad bank on the motherboard.

Nov 23, 2010 | AMD eMachines Desktop System w/ 17'' CRT...

1 Answer

No video signal from new computer AMD Athlon


have you tried the monitor on another PC? if yes? did it work? if yes, your new computer is set on a very high resolution that the syncmaster could not adjust...

May 09, 2010 | Samsung SyncMaster 930B 19" LCD Flat Panel...

1 Answer

Unit came with PC2-6400U Memery. Can I mix this with PC2-6400 memory or will I have to only use PC2-6400U to increase memory?


Go here and run the Memory Scan. It will tell you exactly what you have and what you can install with the price. Perfectly safe and legitimate site I use all the time. This will require a small download. http://www.crucial.com/

Dec 06, 2009 | eMachines ET1161-05 Refurbished Desktop PC...

2 Answers

When monitor is turned on it says no signal for a second or two. then screen goes black and stays that way. monitor and cord have been tested with another cpu and worked


then your pc's video card has likely gone bad. first try powering off the PC, wait 30 secs and power on again. If you still get no display, and you know the monitor is good, you have a bad graphics card or some other hardware fault in the PC.

Oct 03, 2009 | Everex GA3400 Refurbished AMD Desktop...

1 Answer

Before you diagnose the problem, please let me know what it will cost. I am unemployed right now receiving very little from unemployment so I have to be careful. When I turn my computer on (Compaq...


if the power light on the computer comes on, but you get no video or the monitor is powered on but goes into sleep mode then your video adapter on the computer is bad. this is a frequent occurance to the default onboard video adapters connected to the motherboard. you must purchase a pci or agp video card and install into the computer and this will solve your problem. hope this helps, please rate me thanks.

Sep 30, 2009 | AMD eMachines Desktop System w/ 17'' CRT...

1 Answer

Emachine W1135


when ur starting the tower and it light are on and ur fan there is no problem with the power supply, i think that u rily need a new motherboard because ur board will not boot on start up..

Oct 17, 2007 | AMD eMachines Desktop System w/ 17'' CRT...

Not finding what you are looking for?
eMachines Desktop / AMD Athlon Processor / 2GB Memory / 320GB Hard Drive (EL133311F) Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

brian soufane

Level 3 Expert

693 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...