HOW TO FIT BACK HOUR ,MINUTE AND SECOND HANDS ON CITIZEN 6031 G116 611 TA WATCH MANUAL

Put the watch in any form of light for some time. Sun is best but not necessary. When the second hand stops running, it is a sign that the capacitor is low. The eco drive is a solar powered watch. When exposed to light, it converts the energy from the light and stores it in an internal capacitor which is really a battery that will last about 20 years.

Here is how to correct the 0 Position for your watch.

While your the crown of your watch is down in the starting position , turn the crown until the mode hand (this is the circle at the bottom of the face) reaches CHR

At this time now pull out the crown until it clicks two times, two the second setting of the crown.

This will bring the watch to the 0 position correction function.
you can turn the crown clock wise to correct the hour hand.

press the a button to switch hand to second, or press again to switch to minute. Then use crown again to correct 0 position.

The hour and the 24 hour hand is in conjunction with each other.

then push down the crown all the way in and you should be all set.

Thank you for contacting FixYa.
You can download most Citizen instructions here:

http://www.citizenwatch.com/COA/English/settings.asp

Best regards. Jewel

its a solar watch meaning you have to completely charge the watch under artificial light for 24 hours or full sun for 6 hours

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all CITIZEN watch manuals. Rate me, plz.

go to the citizen web site (citizen.com) and select "technical support" and then "setting instructions".

Enter the number off the back of your watch snd the click on "get setting instructions"

The instructions include the steps you need to take to zero the hands.

The chronograph will only run for 59 minutes 59.95 seconds.

If you do not have a set on instructions for your watch, you can find one on their web site (citizen.com)

When there, click on "technical support" and the on "setting instructions" and fill in the number off the back of your watch.

I think Its required Recharging capacitor
Put your watch under lamp light for 12 hours I hope that will solve the issue if not then capacitor need to be replace or watch need cleaning
hope this help
from
AmFix Jewelry & Watch Repair
203 N. LaSalle Street
Chicago, IL 60601
Ph: 312 641 7000
Email: [email protected]
Web: www.goamfix.com

try this