Question about Good Technology Good for Enterprise

1 Answer

I am using Good for enterprise in the iPad 2. For the first 10 min, it was amazing, after that started to face a unexpect exiting error. After openning the app it last no longer than 5 seconds and exits. Tried, forcing the iPad boot, deleted and re-installed the app using a new PIN password, but still facing the same problem.

Posted by on

  • rogerio_w_an May 19, 2011

    Hi, the application was installed after all the background work done by Corporate IT. The login and PIN were supported by them. Several other users are using without restrictions, seems to be something on my account or something to be done in the iPad.....



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers


Just some basics: the Good for Enterprise app will not operate without the necessary back-end software. Please contact your IT administrator for a username and password.

If this problem continues, contact your IT Administrator. Could be a network-related issue.

Hope this helps.

Posted on May 19, 2011

  • NinaE May 19, 2011

    Thanks for the info. Can the IT Admin provide a test account to see if your account is problematic ?

    Can you test your account with another IPad (I know, sounds unlikely, but I'm just trying to narrow down where the problem lies).

    Are you experiencing any other problems with your IPad 2 ?

  • NinaE May 19, 2011

    Oh, and what is the complete Unexpected Error message ? Thanks.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Won't boot past tv face

Won't boot past tv face - Fixya
34 mins ago - Won't boot past tv face - Kurio 7S Tablet question. ... How do I show a video from face book it just boots me off. Dec 20, 2014 ' Apple iPad 2.

My kurio 7 tablet is stuck in the kurio loading page. What can ... > Computers & Internet > Google > Tablet
Kurio 7 tablet how to fix when the smiley face screen stays on the screen .... Kurio 4s wont pass start up ... Kurio 7 won t go pass the smiley box ..... My kurio 7 has been dead for awhile and is stuck on the screen with the little tv what do i do?

The Ultimate Android™ Tablet for Families™ .... Connect Kurio to TV screen. .....Note: The reactivity of the touch screen can vary from one person to another, which is linked to the nature ... To exit the Android interface and go back to Kurio interface, press . .... When the icon is like this , the user won't be able to delete or add.

Getting started - Kurio 7 - Kurio Tablets

Jan 06, 2016 | Kurio 7S Tablet

1 Answer

Printer display error99.07.20 upgrade

99.00.07 Upgrade not performed error reading upgrade
A remote firmware upgrade (RFU) was not performed.
Unexpected read error when reading rest of header.
Recommended action
1. Download the RFU file and attempt the upgrade again.
2. If the error persists, replace the hard disk.
Firmware installation error
Recommended action
Reload the firmware.
Basically you should try to reflash the firmware. If that doesnt work then you may have bricked your printer and shoudl consider warranty support or replacement. Good luck!

Dec 02, 2015 | HP LaserJet Enterprise 500 Color MFP...

1 Answer

49.38.07 error

It a common HP error. It is a non spesific error. Usuly the printer having problems with a specific job you trying to print . The firmware needs updating, delete that job and turn off and on the printer, make sure IP address ,subnet mask and gateway are correct. Also win servers and DNS settings are all correct.update printer driver. Try printing via host name not IP.

Apr 19, 2014 | HP Laserjet Enterprise M4555 Mfp Laserjet...

1 Answer

Ipad2 stuck in recovery mode and when i try to exit it goes back to recovery mode and when i try to restore i get error ll from iTunes

try hard reset! button on face and top button, hold both until it turns off. then plug in to computer with iTunes and restore from there.

Jan 18, 2014 | Apple iPad 2 tablet 16GB 3G

3 Answers

IPad shows blank black screen & won't turn off ~ how do I fix?

Try reseting the iPad by holding the home and power buttons simultaneously until the iPad completely shuts down and the Apple logo appears.

Once the Apple logo appears you can release the buttons. If this does not work, you may need to connect your iPad to your computer and do a factory restore using iTunes.

Jul 16, 2012 | Apple iPad Tablets & eReaders

1 Answer

Good for enterprise app is incompatible with ipad 1

According to their website it should be compatible with the first generation of iPads. The direct link to their support page is available Here.

Oct 11, 2011 | Apple iPad (16 GB) WiFi Tablet PC

1 Answer

While opening n70 camara error is unexpected error

HI there, after turn on the phone don't open the camera.Just reset the phone from phone factory settings.After that restart the phone.When is completely ready for work then open the camera. I hope you naver face the problem.If you faced that problem again, then reinstall the phone software from net or nokia shop. Thanks.

Feb 25, 2010 | Nokia N70 Cellular Phone

1 Answer

Error 1920 installing Mcafee 8.5

Good morning! If you receive a "1920" error regarding failure to start a McAfee Service when trying to update or install Mcafee VirusScan, follow the instructions below.
WARNING: This procedure involves editing the Windows Registry. Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to re-install Windows to correct them. Use this tool at your own risk.

  1. Uninstall McAfee VirusScan Enterprise using the "Add/Remove Programs" option in the Control Panel.
  2. If present, delete c:\Program Files\Network Associates and c:\Program Files\Common Files\Network Associates
  3. Go to the Start menu, select Run, and type regedit .
  4. Find and delete the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates.
  5. Restart the computer.
  6. Install McAfee VirusScan Enterprise and update the software.
Best regards

May 07, 2009 | Computers & Internet

1 Answer

Yahoo mess3nger

hi i am using internet through proxy server my cam is good though i am facing a problem while connecting web cam error  the server is busy. please close the window and try again in a few minutes.

Jan 26, 2008 | Yahoo YHT-630 System

Not finding what you are looking for?
Good Technology Good for Enterprise Logo

Related Topics:

1,178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Good Technology Apps Experts


Level 3 Expert

951 Answers

Alan Gsm
Alan Gsm

Level 2 Expert

17 Answers

Are you a Good Technology App Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides