Question about Hoover Steam Vac Dual V w/ SpinScrub Vacuum
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this one works well as a replacement for the manuel.. everything is the same.
Posted on Dec 02, 2007
This happens when the filter on the inside of the lid for the dirty water tank is pushed all of the way up. You need to leave a 1/4 in. gap from the top to the top of the filter.
Posted on Jan 10, 2008
SOURCE: Hoover Steam Vac Spin Scrub
Remove the brush block, is the shaft on it or broken off. Replace the block if broken off. Turn unit over, with brush block removed, handle tilted back, is the square hole turning, if not then the turbine is bad, this is what turns the brushes.
Posted on Sep 01, 2008
(1) Is the lid aligned and sealed to the recovery tank
(2) Is the round rubber gasket installed on the tubular post under the hood, where the tank seals to the base? The tube extending down from the tank must sit on the rubber seal to get vacuum from the motor.
Posted on Oct 03, 2009
Tips for a great answer:
Jul 24, 2012 | Hoover Steam Vac Dual V w/ SpinScrub...
Nov 28, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
May 13, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Dec 16, 2008 | Hoover SteamVac Carpet/Upholstery Deep...
Aug 20, 2008 | Hoover SteamVac Carpet/Upholstery Deep...
Jul 17, 2008 | Hoover SteamVac Carpet/Upholstery Deep...
Jul 09, 2008 | Vacuums
Apr 01, 2008 | Hoover SteamVac Carpet/Upholstery Deep...
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: