Question about Cell Phones

Open Question

Hi I have just got a Zyxel P-2702R from the Danish company called Stofa, and I have connected it to the other equipment received from the company. It is a cable modem Cisco EPC3000. The line speed is approximately 256/64. It all works well except that the receiver of the telephone call experience some very high sounds like dialing tones. I can't hear anything but the receiver of the call is complaining over the extremely high sound. I'm not sure whether the problem is cause by the Zyxel, but Stofa seems not able to solve the problem so therefore I try to ask you.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: telephone connection problem with DSL

unplug everthing from all jacks in the house. call your # a couple of times. if the line rings, plug everything in 1 at a time, but call again after each hook up. if the line goes dead or is busy, that phone you just plugged in is the problem. [ a short in the phone, computer, answer machine, or any piece of equipment plugged into the phone line.] if the line is busy when everything is unplugged, call your phone company. there maybe a problem with your inside wire.there also maybe a box [called a nid] inside your basment/garage or on the side of your house, where you can plug your phone directly in, bypassing all the jacks in your house
hope this helps.
wg

Posted on Feb 13, 2008

  • 1 Answer

SOURCE: samsung d840 - sound problems

judging from experience although with a sony ericsson, the usual diagnosis for that problem would be the earpiece of your d840. There simply could've been a loose connection with it.

Posted on Apr 10, 2008

kaaaar
  • 22 Answers

SOURCE: cannot hear ringing tone or voices

Its the problem with the speaker... Change it...

Posted on Dec 27, 2008

  • 86 Answers

SOURCE: Hi. My samsung omnia has a sound problem. When you

i think your message alert sound is off mode, check your setting

Posted on Jan 18, 2010

  • 1 Answer

SOURCE: LG enV earpiece and key sound not working

go to tools and setting --> sound settings --> keypad volume...see if you see "KEYPAD VOL-EARJACK"...that means that your phone is stuck in EARJACK mode....get a wired ear piece, plug it in, make a call, and then unplug after you end the call....that should resolve your problem...

Posted on Mar 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motorola surfboard 5100 garden walled error


Sounds like your modem is in a provisional state. Walled garden is simply a tool to provision a modem..... a way that a cable or ADSL company uses to verify that the equipment is associated with a paying customer. Call your ISP if you are unable to access anything past that page via a browser. Chances are your provisioning record is lost, your modem has changed, there are too many devices connected directly to the modem, or there are other account issues such as nonpay status.

Before you call...
Check your modem connections, most companies will not allow two IP addresses to be issued to one piece of equipment (modem) without an extra fee, some companies will not allow two devices to be connected to a modem at all. If you have a device connected USB to the modem and another device connected through the ethernet port...disconnect one. I suggest going Ethernet and using a router if you wish to have more than one device connected to your modem.

Make sure the modem that worked yesterday is the one you are using today. If you've recently replaced your modem, you may need to call your cable company to register the new modem. One modem = one instance of service.

Check your bill due date. If your bill is past due, you may need to satisfy the past due balance before being allowed past the walled garden.

Sep 29, 2012 | Arris SB5100 SURFboard DOCSIS 2.0 Cable...

1 Answer

Hi ser i danish my mobil no is 8986085054. sim block. Plz plz puk noumber send 8986085057. thank you sir.


Mr Danish Please call to your customer care number from any other phone and they will tell you the PUK code for your phone...

Sep 17, 2010 | Computers & Internet

1 Answer

Danish manual for a Garmin zumo 660 GPS?


https://buy.garmin.com/shop/store/manual.jsp?product=010-00727-00&cID=135&pID=15000

Pls come back and rate our answer.

Mar 15, 2010 | Garmin zumo 660 GPS Receiver

1 Answer

Wifi goes down with zyxel G1000v2


It is not compatible at all wifi is a wireless connection and you are adding another device called zyxel it is like i have adsl unlimited and am adding a new connection with adsl normal of course it will go down not same speed at all wifi connection is 54 mbps normal speed where as zyxel is too slow with only 10 mbps

Jul 17, 2009 | Zyxel ZYAIR G-1000 (91-005-026001)...

1 Answer

Access home network remotely via zyxel modem


you will not be able to access from one network to another even if you are on the same workgroup. However, you can setup VPN on both side. the other is to use commercial remote software. i.e.: vnc, mypc, teamviewer, etc.... they don't need anything else, but do require setup on both machine. This is much easier, don't need any permission from the network administrator, or company permission.

Jan 09, 2009 | Zyxel Prestige 660M (P-660M-61)...

2 Answers

Telephone connection problem with DSL


unplug everthing from all jacks in the house. call your # a couple of times. if the line rings, plug everything in 1 at a time, but call again after each hook up. if the line goes dead or is busy, that phone you just plugged in is the problem. [ a short in the phone, computer, answer machine, or any piece of equipment plugged into the phone line.] if the line is busy when everything is unplugged, call your phone company. there maybe a problem with your inside wire.there also maybe a box [called a nid] inside your basment/garage or on the side of your house, where you can plug your phone directly in, bypassing all the jacks in your house
hope this helps.
wg

Feb 13, 2008 | Lands Phones

1 Answer

Reprogramming


Open Internet explorer and type the ip address of the router in the address bar and hit enter. (it should be 192.168.1.1) The setup page for the router should open. Click "Advanced" then click "ISDN Configuration" then click "ISDN Parameters" You can enter the new SPID's the phone company gives you there. Good Luck, El Duderino

Nov 15, 2006 | Ramp Networks WebRamp 410i (516S)...

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...