Question about ASUS P4GE-V Motherboard

1 Answer

New chip I had Pentium 4 1,8 GHz. Pc worked fine. When i insert new chip - celeron 2,66 the system wont start. I can't even go to the bios but the fan is running. HELP

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,042 Answers

You need to update (flash) your bios so that it will recognize the new cpu.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have been given a acer aspire L320 BUT THERE IS NOT A PROCESSOR IN IT. what i want to know is what processor fits.it


The Acer Aspire L320 can take 3 different processors

1. Intel Core 2 Duo

Dual Core chip with speeds from 1.8Ghz to 3.3 Ghz

2. Intel Celeron D

Dual Core chip with speeds from 1.6Ghz to 2.7Ghz

3. Intel Pentium 4

Single core chip with speeds from 1.3Ghz to 3.8Ghz

The Core 2 Duo 3.3 Ghz is the most expensive and Pentium 4 1.3 Ghz the cheapest.

Some more information is available on the Intel website, links are below:

http://www.intel.com/products/processor/core2duo/mobile/index.htm
http://www.intel.com/products/processor/pentium_dual-core/specs.htm


Hope this helps. Thanks for using Fixya.

Jul 13, 2011 | Motherboards

1 Answer

Changing CPU - Celeron with Pentium 4 - the PC does not start. Is any switch to modify on mainboard ?


may have to check that its compatible and if so you probably need to upgrade motherboard bios to support new chip. Put old one back in update system bios then install new one if supported. Have run into this many times.

Jul 04, 2011 | Motherboards

1 Answer

I have just builed the PC with Supermicro P4SCA and when turn it on I get only the wlecone screen sying "SUPERMICRO" and that itm it never go beyond that. Cltr_Alt_Del does not work and I can not access...


Maximum processor supported: Intel Pentium® 4 processors or Intel Celeron processors up to 3.06 GHz (with Hyper Threading) at a system bus speed of 800/533/400 MHz.
Yours is too fast for the motherboard, replace it with an older weaker one.

Feb 03, 2010 | SuperMicro P4SCA 875P Mainboard...

3 Answers

Nobody has a list of cpu's that will work with this mobo. Biostar P4M800-M7A Ver. 7.0. It was sold as compatible with dual core cpu's, but no-one has a list of which intel 775 dual cores. Did New Egg lie?...


P4TAW Extreme 1.0 925X Socket 775 Pentium 4 3.6GHz I915P-A7 1.0 915P Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz I915G-M7 1.0 915G Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz I86PE-A7 1.0 865PE Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz I865G-M7 1.0 865G Socket 775 Pentium 4 3.6GHz Celeron D 3.06GHz N4SIE-A7 1.0 NF4 SLI Intel Ed. Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz P4M80-M7 1.0 P4M800 Socket 775 Pentium 4 3.6GHz Celeron D 3.06GHz

Dec 08, 2009 | Biostar P4M800-M7A Motherboard

1 Answer

Upgrading CPU


Yeah, it was a bit hard to find, not being a currernt model I was stuck on the Asus site trying to find out for you.
Then I found this site -
http://www.hardwarezone.com/articles/view.php?cid=6&id=465&pg=
It says
  • Socket 478 for Intel� Pentium 4 / Celeron processors
  • Intel� Pentium 4 Processors 1.4GHz - 2.53GHz or higher
  • Intel� Celeron Processors 1.7GHz - 1.8GHz or higher
  • Supports processors at 400 / 533MHz front side bus
    Or higher, it says. But doesn't say how higher. It's a fair assessment that if it is a Pentium 4 socket 478 chip, it should work. Then it's a case of choosing one that suits your budget.
    Have a look on the Asus site for the latest BIOS updates too - they might have a clue as to what chip you can go to -
    http://support.asus.com/download/download_item.aspx?model=P4S533-MX&product=1&type=All&SLanguage=en
    Er, no - it doesn't tell you. But if you go thru the page you will find BIOS version 1005 that " P4S533-MX BIOS 1005
    Support new Intel P4 CPU" and the latest bios is 1007.002

    There's a motherboard user manual further down on the page. Make sure you choose the English one.
    Seems the issue is FSB speed, 533 or 400. No big problem for most, but I did see a Pentium4 3.0Ghz chip at 800 FSB so just check the speed of the processor matches the specs the motherboard handles. Like you say, looks like the 3.2 might be too fast because of the FSB requirement.
    Remember, a P4 is going to be quicker than a celeron anyhow so just go with the fastest 533 FSB chip you can find.
    A short-cut to the english manual, here - http://dlcdnet.asus.com/pub/ASUS/mb/sock478/p4s533-mx/e1187_p4s533-mx.pdf

  • Apr 27, 2009 | ASUS P4S533-MX Motherboard

    1 Answer

    Can I use Pentium 4, frequency 3.0 GHz with Asus P4B?


    Asus support says the fastest CPU you can use in that MB is a P4 2.6 GHz or a Celeron 2.8 GHz.

    For the P4 you need BIOS ver. 1011 and for the Celeron you need ver. 1013.004.

    Here is a link to the entire list:

    P4B CPU Support

    Thanks for using Fixya.

    Apr 14, 2009 | ASUS Intel 845 Chipset P4B (P4B WOA)...

    1 Answer

    Install a new Processor and Motherboard to my PC


    Well go into your bios on boot up it is usaly the del key and put all your CD HDD and so on to auto or go to device manager you will get help there or i have a website for you its( pcstats) you will get all the info you will need

    Mar 19, 2009 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

    1 Answer

    Best/Fastest CPU for DFI PE21-EL mobo


    Your motherboard supports 2 different fsb's.
    look these up @ cpu-world
    you can use:
    Intel Pentium 4 processor (478-pin)
    - 533MHz system data bus - supports up to 2.8 GHz
    - 400MHz system data bus - supports up to 2.4 GHz

    Intel Celeron processor
    - 400MHz system data bus - supports up to 2.0 GHz CPU speed
    and here are the suppoted cpus:
    Intel Celeron RK80531RC029128 BX80531P170G128 1.7 GHz 17 x 400 MHz, Willamette Any A RK80531RC033128 BX80531P180G128 1.8 GHz 18 x 400 MHz, Willamette Any A RK80531RC037128 BX80531P190G128 1.9 GHz 19 x 400 MHz, Willamette Any A RK80532RC041128 BX80532RC2000B 2.0 GHz 20 x 400 MHz, Northwood A 1.525V not supported RK80532RC045128 BX80532RC2100B 2.1 GHz 21 x 400 MHz, Northwood A 1.525V not supported Intel Pentium 4 RK80532PC021512 1.5 GHz 15 x 400 MHz, Northwood Any A RK80532PC025512 BX80532PC1600D 1.6 GHz 16 x 400 MHz, Northwood Any A RK80532PC029512 1.7 GHz 17 x 400 MHz, Northwood Any A RK80532PC033512 BX80532PC1800D 1.8 GHz 18 x 400 MHz, Northwood Any A RK80532PC037512 1.9 GHz 19 x 400 MHz, Northwood Any A RK80532PC041512 BX80532PC2000D 2.0 GHz 20 x 400 MHz, Northwood A 1.525V not supported 2.1 GHz 21 x 400 MHz, Northwood A 1.525V not supported RK80532PC049512 BX80532PC2200D 2.2 GHz 22 x 400 MHz, Northwood A 1.525V not supported RK80532PE051512 BX80532PE2266D 2.26 GHz 19 x 533 MHz, Northwood A 1.525V not supported RK80532PE056512 BX80532PE2400D 2.4 GHz 18 x 533 MHz, Northwood A 1.525V not supported RK80532PC056512 BX80532PC2400D 2.4 GHz 24 x 400 MHz, Northwood A 1.525V not supported RK80532PC060512 BX80532PC2500D 2.5 GHz 25 x 400 MHz, Northwood A 1.525V not supported RK80532PE061512 BX80532PE2533D 2.53 GHz 19 x 533 MHz, Northwood A 1.525V not supported RK80532PC064512 BX80532PC2600D 2.6 GHz 26 x 400 MHz, Northwood A 1.525V not supported RK80532PE067512 BX80532PE2667D 2.66 GHz 20 x 533 MHz, Northwood A 1.525V not supported RK80532PE072512 BX80532PE2800D 2.8 GHz 21 x 533 MHz, Northwood A 1.525V not supported

    Dec 26, 2008 | DFI PE21-EL Motherboard

    1 Answer

    Urgent


    are you sure that you have the same zif socket types either a intel celeron or an intel pentium, they are different socket types, but if theres nothing wrong with your other cpu your not going to see any difference in speed, upgrade your memory, but obviously if your other cpu has failed check the socket types and then reset your bios on the motherboard shorting terminals.

    Sep 06, 2007 | ASUS P4XP-X Motherboard

    1 Answer

    I change a P4 3,2 GHz for a PentiumD 3,2 GHz and do not work


    if you go to the link below you will see all the suported processors for your motherboard, but a Pentium D is not listed, only Celeron D's http://www.pcchips.com.tw/PCCWeb/Products/ProductsDetail.aspx?MenuID=35&LanID=2&DetailID=306&DetailName=CPU%20Support

    Jul 09, 2007 | PC Chips : PC-Chips M985G...

    Not finding what you are looking for?
    ASUS P4GE-V Motherboard Logo

    Related Topics:

    111 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top ASUS Motherboards Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Tony

    Level 3 Expert

    2598 Answers

    Mark Taylor
    Mark Taylor

    Level 3 Expert

    728 Answers

    Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...