Question about Maytag MHWZ400T Front Load Washer

1 Answer

Maytag Epic Z 400-The water doesn't pump out @ the end of a cycle. I assume the pump is clogged how do I open the front of the machine?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 552 Answers

Hi,

Remove the three screws on the lower front panel. The panel will slide down and out of the way. Next twist the filter handle and pull the filter out of position. Clean the filter and run a test cycle. That should fix your washer friend, good luck.

Posted on May 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY ON MY MAYTAG EPIC WHEN IT GETS TO SPIN IT JUST MAKES DRAINING NOISE AND WATER WONT DRAIN?


Sounds like your drain line is clogged. You may also have stuff clogging a water filter just before the pump, or the water outlet coming from the drum.
It could also be a problem with the pump, but until the drain line is opened up, you still won't be able to empty the water from the washer.

Aug 11, 2014 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

My Frigidare Affinity front load washer doesn't pump water on the Normal cycle.


Check the water inlet electro valve at the rear of the washer and make sure it is working.

Jul 25, 2017 | Frigidaire Washing Machines

1 Answer

Maytag Model # MD87609AWB3 after rinse cycle it stops. I have to push button to finish drying cycle


Hi
This issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. First make sure that the drain is not clogged and remove clogs if present. If no visible lint is present then remove the lower front access panel to check the drain filter and drain pump for any clogs, you'll need to clean the drain filter and drain pump completely. Also, check for any food pieces stuck near the pump impeller & clean the chopper assembly. Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat. Hope this helps... Please post back for any further assistance.
Daniel

Aug 24, 2011 | Maytag Dishwashers

1 Answer

Maytag Epic Z won't Drain after rinse cycle.


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101
' '; ';

Aug 13, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

The front end load washer door wont open as there is water still in washer and not operating. what to do ..thx


Hi, Make sure it is plugged in properly, and let the cycle finish correctly. Try advancing the cycle control knob ( if it has one). I need a bit more info...

Feb 18, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Cycle doesn't end . It seems to stick at 4 minutes.


My guess is it is detecting overuse of detergent. It may be having a problem with the pump filter restricting the flow of water through the pump.themobilian_207.jpgthemobilian_208.jpgthemobilian_209.jpg

Nov 20, 2010 | Maytag EPIC MFW9700S Front Load Washer

2 Answers

What does the code nd stands for on the maytag front load washer?


ND No Drain Machine control board monitors water level in washer during and at the end of pump out. If wash level does not reset pressure switch, it will see water left in the washer. 1.Check for pump/drain restriction. 2.Check pump operation.
3.Check pressure switch for open contacts.
4.Check inputs and outputs at machine control board.
5.Replace responsible component.

May 28, 2010 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

During the wash cycle on a maytag epic mfw9800tq0 my daughter opened the door and after water splashed on the floor she slammed the door shut. It will not drain and spin out now. the tub will agitate...


if she could open the door during wash cycle the door lock is broken and you may need a new one also inspect pumpn and tub to pump hose for foreign objects

Jul 07, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Maytag washing machine


If the hot water is not cycling then you have a bad solenoid (coil),strainer is clogged or no power to the coil. Check the harness to make sure that the connector is firmly secured to the coil

Regards

Sep 21, 2008 | Maytag EPIC MFW9700S Front Load Washer

Not finding what you are looking for?
Maytag MHWZ400T Front Load Washer Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...