Question about Canon Powershot SX110 IS Digital Camera 9.0MP

1 Answer

Lens error when u start or open camera - Canon Powershot SX110 IS Digital Camera 9.0MP

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My nikon L16 camera was slipped off from my friends hand while the lens was open now when i start it it shows a lens error what should i do


Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

Feb 18, 2012 | Nikon L16 silver Digital Camera

2 Answers

Lens wont extend, lens error restart camera


My wife's Canon SD200 got stuck with an open lens and the E18 error. I opened the case and wiggled things and still nothing. Then, I turned the camera on and started tapping the edge of the lens casing with the magnifying glass I'd been using (need the battery and memory chip in place and make sure you've transferred pictures to your computer before trying this). Voila! The lens closed. But, of course, it wouldn't open and still gave the E18 error. Well, one good tap deserved another and Voila! again. It opened. After a few more iterations - and cleaning the lens casing each time, it was back to normal. The trick is the timing of the tapping. Just after turning on the power to the camera start tapping on the lens casing - not hard - just a light tapping. And don't tap on the glass lens itself -- you don't want to really break it.

May 15, 2009 | Canon PowerShot SD600 Digital Camera

1 Answer

Lens error, lens wont come out at all just started wasnt dropped hit or anything


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Apr 27, 2009 | Sanyo Vpc-s1070w Digital Camera

2 Answers

"Lens error - restart camera" message, but won't restart


I just had the same issue when one of my children drop the camera. I'm not wanting to break anyone's camera but I was able to open the lens cover and pull the lens out and then turning it on it retracted and worked just like it should.

Apr 19, 2009 | Canon PowerShot SX100 IS Digital Camera

1 Answer

Canon camera when turned on, lens will not


Hi

What you are seeing is a generic error message, starting your camera again won't do anything unfortunately.

You need to replace the lens, we have your lens repair available on our site for about $75! If we can help please let us know.

Thomas
Owner- Darntoothysam com

Apr 04, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

Lens error


The lens on my canon camera power shot A430 wont open and when I try to start it is says lens error restart the camera

Aug 04, 2008 | Canon PowerShot A430 Digital Camera

5 Answers

Lens Error, Restart


Hi

What you are seeing is a generic stuck lens error message, turning off the camera and turning it on again will not fix the lens unfortunately.

Your lens needs to be cleaned or repaired, and if it cant be repaired it needs to be replaced. There are online places that will do it for a decent price and there are others that overcharge by way too much.

Fixya rules prevent me from giving you a link to anything off Fixya that would help you fix your camera.

Good luck from....

Darntoothysam com

May 01, 2008 | Canon PowerShot SD1000 Digital Camera

2 Answers

Lens error


wheni go to turn on my camera it says"lens error"on the screen and wont turn on lens is "stuck"open.

Nov 26, 2007 | Nikon COOLPIX L3 Digital Camera

1 Answer

Lens Error


Firmware doesn't solve lens errors. that can only be solved by sending into repairs. Give them a call at 800-706-2534 and then keep choosing option 1.

Jan 02, 2007 | Casio QV-R3 Digital Camera

Not finding what you are looking for?
Canon Powershot SX110 IS  Digital Camera 9.0MP Logo

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...